@@ -1072,7 +1072,7 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
int ret;
adv->i2c_cec = i2c_new_ancillary_device(adv->i2c_main, "cec",
- ADV7511_CEC_I2C_ADDR_DEFAULT);
+ ADV7511_CEC_I2C_ADDR_DEFAULT, NULL);
if (IS_ERR(adv->i2c_cec))
return PTR_ERR(adv->i2c_cec);
@@ -1261,7 +1261,7 @@ static int adv7511_probe(struct i2c_client *i2c)
adv7511_packet_disable(adv7511, 0xffff);
adv7511->i2c_edid = i2c_new_ancillary_device(i2c, "edid",
- ADV7511_EDID_I2C_ADDR_DEFAULT);
+ ADV7511_EDID_I2C_ADDR_DEFAULT, NULL);
if (IS_ERR(adv7511->i2c_edid)) {
ret = PTR_ERR(adv7511->i2c_edid);
goto uninit_regulators;
@@ -1271,7 +1271,7 @@ static int adv7511_probe(struct i2c_client *i2c)
adv7511->i2c_edid->addr << 1);
adv7511->i2c_packet = i2c_new_ancillary_device(i2c, "packet",
- ADV7511_PACKET_I2C_ADDR_DEFAULT);
+ ADV7511_PACKET_I2C_ADDR_DEFAULT, NULL);
if (IS_ERR(adv7511->i2c_packet)) {
ret = PTR_ERR(adv7511->i2c_packet);
goto err_i2c_unregister_edid;
@@ -893,24 +893,10 @@ int i2c_dev_irq_from_resources(const struct resource *resources,
return 0;
}
-/**
- * i2c_new_client_device - instantiate an i2c device
- * @adap: the adapter managing the device
- * @info: describes one I2C device; bus_num is ignored
- * Context: can sleep
- *
- * Create an i2c device. Binding is handled through driver model
- * probe()/remove() methods. A driver may be bound to this device when we
- * return from this function, or any later moment (e.g. maybe hotplugging will
- * load the driver module). This call is not appropriate for use by mainboard
- * initialization logic, which usually runs during an arch_initcall() long
- * before any i2c_adapter could exist.
- *
- * This returns the new i2c client, which may be saved for later use with
- * i2c_unregister_device(); or an ERR_PTR to describe the error.
- */
-struct i2c_client *
-i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
+static struct i2c_client *
+__i2c_new_client_device(struct i2c_adapter *adap,
+ struct i2c_board_info const *info,
+ struct device *dev)
{
struct i2c_client *client;
int status;
@@ -944,7 +930,7 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf
if (status)
goto out_err;
- client->dev.parent = &client->adapter->dev;
+ client->dev.parent = dev ? dev : &client->adapter->dev;
client->dev.bus = &i2c_bus_type;
client->dev.type = &i2c_client_type;
client->dev.of_node = of_node_get(info->of_node);
@@ -984,6 +970,28 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf
kfree(client);
return ERR_PTR(status);
}
+
+/**
+ * i2c_new_client_device - instantiate an i2c device
+ * @adap: the adapter managing the device
+ * @info: describes one I2C device; bus_num is ignored
+ * Context: can sleep
+ *
+ * Create an i2c device. Binding is handled through driver model
+ * probe()/remove() methods. A driver may be bound to this device when we
+ * return from this function, or any later moment (e.g. maybe hotplugging will
+ * load the driver module). This call is not appropriate for use by mainboard
+ * initialization logic, which usually runs during an arch_initcall() long
+ * before any i2c_adapter could exist.
+ *
+ * This returns the new i2c client, which may be saved for later use with
+ * i2c_unregister_device(); or an ERR_PTR to describe the error.
+ */
+struct i2c_client *
+i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
+{
+ return __i2c_new_client_device(adap, info, NULL);
+}
EXPORT_SYMBOL_GPL(i2c_new_client_device);
/**
@@ -1054,6 +1062,25 @@ static struct i2c_driver dummy_driver = {
.id_table = dummy_id,
};
+static struct i2c_client *__i2c_new_dummy_device(struct i2c_adapter *adapter,
+ u16 address, const char *name,
+ struct device *dev)
+{
+ struct i2c_board_info info = {
+ I2C_BOARD_INFO("dummy", address),
+ };
+
+ if (name) {
+ ssize_t ret = strscpy(info.type, name, sizeof(info.type));
+
+ if (ret < 0)
+ return ERR_PTR(dev_err_probe(&adapter->dev, ret,
+ "Invalid device name\n"));
+ }
+
+ return __i2c_new_client_device(adapter, &info, dev);
+}
+
/**
* i2c_new_dummy_device - return a new i2c device bound to a dummy driver
* @adapter: the adapter managing the device
@@ -1074,11 +1101,7 @@ static struct i2c_driver dummy_driver = {
*/
struct i2c_client *i2c_new_dummy_device(struct i2c_adapter *adapter, u16 address)
{
- struct i2c_board_info info = {
- I2C_BOARD_INFO("dummy", address),
- };
-
- return i2c_new_client_device(adapter, &info);
+ return __i2c_new_dummy_device(adapter, address, NULL, NULL);
}
EXPORT_SYMBOL_GPL(i2c_new_dummy_device);
@@ -1122,15 +1145,17 @@ EXPORT_SYMBOL_GPL(devm_i2c_new_dummy_device);
* @client: Handle to the primary client
* @name: Handle to specify which secondary address to get
* @default_addr: Used as a fallback if no secondary address was specified
+ * @aux_device_name: Ancillary device name
* Context: can sleep
*
* I2C clients can be composed of multiple I2C slaves bound together in a single
* component. The I2C client driver then binds to the master I2C slave and needs
- * to create I2C dummy clients to communicate with all the other slaves.
+ * to create I2C ancillary clients to communicate with all the other slaves.
*
- * This function creates and returns an I2C dummy client whose I2C address is
- * retrieved from the platform firmware based on the given slave name. If no
- * address is specified by the firmware default_addr is used.
+ * This function creates and returns an I2C ancillary client whose I2C address
+ * is retrieved from the platform firmware based on the given slave name. If no
+ * address is specified by the firmware default_addr is used. If no aux_device_
+ * name is specified by the firmware, it will create an I2C dummy client.
*
* On DT-based platforms the address is retrieved from the "reg" property entry
* cell whose "reg-names" value matches the slave name.
@@ -1139,8 +1164,9 @@ EXPORT_SYMBOL_GPL(devm_i2c_new_dummy_device);
* i2c_unregister_device(); or an ERR_PTR to describe the error.
*/
struct i2c_client *i2c_new_ancillary_device(struct i2c_client *client,
- const char *name,
- u16 default_addr)
+ const char *name,
+ u16 default_addr,
+ const char *aux_device_name)
{
struct device_node *np = client->dev.of_node;
u32 addr = default_addr;
@@ -1153,7 +1179,9 @@ struct i2c_client *i2c_new_ancillary_device(struct i2c_client *client,
}
dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr);
- return i2c_new_dummy_device(client->adapter, addr);
+ return __i2c_new_dummy_device(client->adapter, addr,
+ aux_device_name ? aux_device_name : NULL,
+ &client->dev);
}
EXPORT_SYMBOL_GPL(i2c_new_ancillary_device);
@@ -186,7 +186,7 @@ static int adv748x_initialise_clients(struct adv748x_state *state)
state->i2c_clients[i] = i2c_new_ancillary_device(
state->client,
adv748x_default_addresses[i].name,
- adv748x_default_addresses[i].default_addr);
+ adv748x_default_addresses[i].default_addr, NULL);
if (IS_ERR(state->i2c_clients[i])) {
adv_err(state, "failed to create i2c client %u\n", i);
@@ -2935,7 +2935,8 @@ static struct i2c_client *adv76xx_dummy_client(struct v4l2_subdev *sd,
else
new_client = i2c_new_ancillary_device(client,
adv76xx_default_addresses[page].name,
- adv76xx_default_addresses[page].default_addr);
+ adv76xx_default_addresses[page].default_addr,
+ NULL);
if (!IS_ERR(new_client))
io_write(sd, io_reg, new_client->addr << 1);
@@ -489,7 +489,8 @@ devm_i2c_new_dummy_device(struct device *dev, struct i2c_adapter *adap, u16 addr
struct i2c_client *
i2c_new_ancillary_device(struct i2c_client *client,
const char *name,
- u16 default_addr);
+ u16 default_addr,
+ const char *aux_device_name);
void i2c_unregister_device(struct i2c_client *client);
Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main device and another for rtc device. Enhance i2c_new_ancillary_device() to instantiate a real device. (eg: Instantiate rtc device from PMIC driver) Added helper function __i2c_new_dummy_device to share the code between i2c_new_dummy_device and i2c_new_ancillary_device(). Also added helper function __i2c_new_client_device() to pass parent dev parameter, so that the ancillary device can assign its parent during creation. Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- v3->v4: * Dropped Rb tag from Geert as there are new changes. * Introduced __i2c_new_dummy_device() to share the code between i2c_new_dummy_device and i2c_new_ancillary_device(). * Introduced __i2c_new_client_device() to pass parent dev parameter, so that the ancillary device can assign its parent during creation. v3: * New patch Ref: https://patchwork.kernel.org/project/linux-renesas-soc/patch/20230505172530.357455-5-biju.das.jz@bp.renesas.com/ --- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 +- drivers/i2c/i2c-core-base.c | 90 +++++++++++++------- drivers/media/i2c/adv748x/adv748x-core.c | 2 +- drivers/media/i2c/adv7604.c | 3 +- include/linux/i2c.h | 3 +- 5 files changed, 67 insertions(+), 37 deletions(-)