| Message ID | 20230527223632.11781-1-13916275206@139.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v4,1/6] ASoC: tas2781: Add Header file for tas2781 driver | expand |
On 28/05/2023 00:36, Shenghao Ding wrote: > Create tas2781.yaml for tas2781 driver. > > Signed-off-by: Shenghao Ding <13916275206@139.com> > > --- > Changes in v4: > - remove '\t' in the file Keep the rest of the changelog. > Changes to be committed: > new file: Documentation/devicetree/bindings/sound/ti,tas2781.yaml This is useless, drop. Your mail threading is still broken. This breaks usage with b4, so I cannot easily make diffs or apply it easily (e.g. via any message ID). I already mentioned this and no improvements at v4. > --- > .../devicetree/bindings/sound/ti,tas2781.yaml | 88 +++++++++++++++++++ > 1 file changed, 88 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2781.yaml > > diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml > new file mode 100644 > index 000000000000..b3dcd7b18f5d > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml > @@ -0,0 +1,88 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2022 - 2023 Texas Instruments Incorporated > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Texas Instruments TAS2781 SmartAMP > + > +maintainers: > + - Shenghao Ding <shenghao-ding@ti.com> > + > +description: > + The TAS2781 is a mono, digital input Class-D audio amplifier > + optimized for efficiently driving high peak power into small > + loudspeakers. Integrated an on-chip DSP supports Texas Instruments > + Smart Amp speaker protection algorithm. The integrated speaker > + voltage and current sense provides for real time > + monitoring of loudspeaker behavior. > + > +allOf: > + - $ref: dai-common.yaml# > + > +properties: > + '#address-cells': > + const: 1 > + '#size-cells': > + const: 0 Put compatible first. What's more I don't understand why added it. Your changelog does not explain it - you wrote there is only one change, fix of tab. > + > + compatible: > + enum: > + - ti,tas2781 > + > + reg: > + description: > + I2C address, in multiple tas2781s case, all the i2c address > + aggreate as one Audio Device to support multiple audio slots. > + maxItems: 4 > + items: > + minimum: 0x38 > + maximum: 0x3f > + > + reset-gpios: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + ti,broadcast-addr: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Generic I2C address for all the tas2781 devices in > + purpose of I2C broadcast during the multi-device > + writes, useless in mono case or remove this item to > + disable broadcast mode. > + > + '#sound-dai-cells': > + const: 1 > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + i2c { > + /* example with quad support, such as tablet or pad device */ > + #address-cells = <1>; > + #size-cells = <0>; > + quad: codec@38 { > + compatible = "ti,tas2781"; > + reg = < 0x38 /* Audio slot 0 */ > + 0x3a /* Audio slot 1 */ > + 0x39 /* Audio slot 2 */ > + 0x3b /* Audio slot 3 */ These should be four items, right? <0x38>, <0x3a> etc. Drop spaces around <>, that's not DTS syntax. > + >; > + #sound-dai-cells = <1>; > + reset-gpios = < &gpio1 10 GPIO_ACTIVE_HIGH >; Drop redundant white space. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml new file mode 100644 index 000000000000..b3dcd7b18f5d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 - 2023 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TAS2781 SmartAMP + +maintainers: + - Shenghao Ding <shenghao-ding@ti.com> + +description: + The TAS2781 is a mono, digital input Class-D audio amplifier + optimized for efficiently driving high peak power into small + loudspeakers. Integrated an on-chip DSP supports Texas Instruments + Smart Amp speaker protection algorithm. The integrated speaker + voltage and current sense provides for real time + monitoring of loudspeaker behavior. + +allOf: + - $ref: dai-common.yaml# + +properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + compatible: + enum: + - ti,tas2781 + + reg: + description: + I2C address, in multiple tas2781s case, all the i2c address + aggreate as one Audio Device to support multiple audio slots. + maxItems: 4 + items: + minimum: 0x38 + maximum: 0x3f + + reset-gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + + ti,broadcast-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Generic I2C address for all the tas2781 devices in + purpose of I2C broadcast during the multi-device + writes, useless in mono case or remove this item to + disable broadcast mode. + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + /* example with quad support, such as tablet or pad device */ + #address-cells = <1>; + #size-cells = <0>; + quad: codec@38 { + compatible = "ti,tas2781"; + reg = < 0x38 /* Audio slot 0 */ + 0x3a /* Audio slot 1 */ + 0x39 /* Audio slot 2 */ + 0x3b /* Audio slot 3 */ + >; + #sound-dai-cells = <1>; + reset-gpios = < &gpio1 10 GPIO_ACTIVE_HIGH >; + interrupt-parent = <&gpio1>; + interrupts = <15>; + /* Generic I2C addr among all the tas2781s for i2c data broadcast */ + ti,broadcast-addr = <0x40>; + }; + }; +...
Create tas2781.yaml for tas2781 driver. Signed-off-by: Shenghao Ding <13916275206@139.com> --- Changes in v4: - remove '\t' in the file Changes to be committed: new file: Documentation/devicetree/bindings/sound/ti,tas2781.yaml --- .../devicetree/bindings/sound/ti,tas2781.yaml | 88 +++++++++++++++++++ 1 file changed, 88 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2781.yaml