diff mbox series

[v3,3/4] ARM: dts: qcom-pm8941: add resin support

Message ID 20230531014248.3824043-4-dmitry.baryshkov@linaro.org
State Accepted
Commit de57328b1c9da0f30ccca4925ed6d5615b1a72b3
Headers show
Series ARM: dts: qcom: apq8074-dragonboard: enable resin device | expand

Commit Message

Dmitry Baryshkov May 31, 2023, 1:42 a.m. UTC 
Wrap existing pwrkey and new resin nodes into the new pon node to enable
volume-down key support on platforms using pm8941 PMIC.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom-pm8941.dtsi | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index a821f0368a28..cf1fcf97fa88 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -19,12 +19,24 @@  rtc@6000 {
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pwrkey@800 {
-			compatible = "qcom,pm8941-pwrkey";
+		pon@800 {
+			compatible = "qcom,pm8941-pon";
 			reg = <0x800>;
-			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+			};
+
+			pm8941_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
 		};
 
 		usb_id: usb-detect@900 {