diff mbox series

arm64: dts: ti: k3-am625-beagleplay: Use UART name in pinmux name

Message ID 20230601184451.358272-1-afd@ti.com
State Accepted
Commit 649e121f9301a4d275b68323a9807b762618e516
Headers show
Series arm64: dts: ti: k3-am625-beagleplay: Use UART name in pinmux name | expand

Commit Message

Andrew Davis June 1, 2023, 6:44 p.m. UTC 
The main_uart0 may not always be the console, but it will always be
the UART0 in MAIN domain. Name the pinmux node to match. This makes
it consistent with all other TI SoC based boards.

Signed-off-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index cb46c38ce2cc1..29c51705c2f17 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -397,7 +397,7 @@  AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */
 		>;
 	};
 
-	console_pins_default: console-pins-default {
+	main_uart0_pins_default: main-uart0-pins-default {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
 			AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
@@ -736,7 +736,7 @@  wlcore: wlcore@2 {
 
 &main_uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&console_pins_default>;
+	pinctrl-0 = <&main_uart0_pins_default>;
 	status = "okay";
 };