diff mbox series

dt-bindings: gpio: gpio-delay: Spelling s/curcuit/circuit/

Message ID ab68df6b056a3b381d1d53cf1502e814812c4f96.1686045675.git.geert+renesas@glider.be
State Accepted
Commit ba65c79fbb813423e7d42d99375e2045b27958a6
Headers show
Series dt-bindings: gpio: gpio-delay: Spelling s/curcuit/circuit/ | expand

Commit Message

Geert Uytterhoeven June 6, 2023, 10:01 a.m. UTC 
Fix misspellings of "circuit".

Fixes: c7239a3da1628767 ("dt-bindings: gpio: Add gpio-delay binding document")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 Documentation/devicetree/bindings/gpio/gpio-delay.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
index 7c16a4e1a768ef72..1cebc4058e272660 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
@@ -11,7 +11,7 @@  maintainers:
 
 description: |
   This binding describes an electrical setup where setting an GPIO output
-  is delayed by some external setup, e.g. RC curcuit.
+  is delayed by some external setup, e.g. RC circuit.
 
   +----------+                    +-----------+
   |          |             VCC_B  |           |
@@ -30,7 +30,7 @@  description: |
                            GND
 
   If the input on the consumer is controlled by an open-drain signal
-  attached to an RC curcuit the ramp-up delay is not under control
+  attached to an RC circuit the ramp-up delay is not under control
   of the GPIO controller.
 
 properties: