diff mbox series

[v3,12/23] interconnect: qcom: sdm660: Hook up RPM bus clk definitions

Message ID 20230526-topic-smd_icc-v3-12-5fb7d39b874f@linaro.org
State Superseded
Headers show
Series Restructure RPM SMD ICC | expand

Commit Message

Konrad Dybcio June 12, 2023, 6:24 p.m. UTC
Assign the necessary definitions to migrate to the new bus clock
handling mechanism.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/interconnect/qcom/sdm660.c | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/drivers/interconnect/qcom/sdm660.c b/drivers/interconnect/qcom/sdm660.c
index 003fc7d110a7..5743ed680e8e 100644
--- a/drivers/interconnect/qcom/sdm660.c
+++ b/drivers/interconnect/qcom/sdm660.c
@@ -1511,6 +1511,7 @@  static const struct qcom_icc_desc sdm660_a2noc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = sdm660_a2noc_nodes,
 	.num_nodes = ARRAY_SIZE(sdm660_a2noc_nodes),
+	.bus_clk_desc = &aggre2_clk,
 	.intf_clocks = a2noc_intf_clocks,
 	.num_intf_clocks = ARRAY_SIZE(a2noc_intf_clocks),
 	.regmap_cfg = &sdm660_a2noc_regmap_config,
@@ -1539,6 +1540,7 @@  static const struct qcom_icc_desc sdm660_bimc = {
 	.type = QCOM_ICC_BIMC,
 	.nodes = sdm660_bimc_nodes,
 	.num_nodes = ARRAY_SIZE(sdm660_bimc_nodes),
+	.bus_clk_desc = &bimc_clk,
 	.regmap_cfg = &sdm660_bimc_regmap_config,
 };
 
@@ -1593,6 +1595,7 @@  static const struct qcom_icc_desc sdm660_cnoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = sdm660_cnoc_nodes,
 	.num_nodes = ARRAY_SIZE(sdm660_cnoc_nodes),
+	.bus_clk_desc = &bus_2_clk,
 	.regmap_cfg = &sdm660_cnoc_regmap_config,
 };
 
@@ -1655,6 +1658,7 @@  static const struct qcom_icc_desc sdm660_mnoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = sdm660_mnoc_nodes,
 	.num_nodes = ARRAY_SIZE(sdm660_mnoc_nodes),
+	.bus_clk_desc = &mmaxi_0_clk,
 	.intf_clocks = mm_intf_clocks,
 	.num_intf_clocks = ARRAY_SIZE(mm_intf_clocks),
 	.regmap_cfg = &sdm660_mnoc_regmap_config,
@@ -1692,6 +1696,7 @@  static const struct qcom_icc_desc sdm660_snoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = sdm660_snoc_nodes,
 	.num_nodes = ARRAY_SIZE(sdm660_snoc_nodes),
+	.bus_clk_desc = &bus_1_clk,
 	.regmap_cfg = &sdm660_snoc_regmap_config,
 };