diff mbox series

[v4,02/17] rtc: pcf2127: improve timestamp reading performance

Message ID 20230622145800.2442116-3-hugo@hugovil.com
State New
Headers show
Series rtc: pcf2127: add PCF2131 driver | expand

Commit Message

Hugo Villeneuve June 22, 2023, 2:57 p.m. UTC
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

Reading the 7 timetamp registers currently involves reading 25 registers
solely to be able to print the content of the three control registers,
in addition to the 7 timestamp registers. This print never occurs,
unless the user enables dynamic debug in this driver or set
CONFIG_RTC_DEBUG.

Reading the timestamp registers should consist of reading 7
consecutive timestamp registers.

This patch optimize the performance of reading the timestamp registers
by reading 7 consecutive registers instead of 25, and dropping the
print of the control registers.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
 drivers/rtc/rtc-pcf2127.c | 32 +++++++++++---------------------
 1 file changed, 11 insertions(+), 21 deletions(-)
diff mbox series

Patch

diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index 475a627b2254..a913a5c82ebf 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -66,12 +66,6 @@ 
 #define PCF2127_REG_TS_CTRL		0x12
 #define PCF2127_BIT_TS_CTRL_TSOFF		BIT(6)
 #define PCF2127_BIT_TS_CTRL_TSM			BIT(7)
-#define PCF2127_REG_TS_SC		0x13
-#define PCF2127_REG_TS_MN		0x14
-#define PCF2127_REG_TS_HR		0x15
-#define PCF2127_REG_TS_DM		0x16
-#define PCF2127_REG_TS_MO		0x17
-#define PCF2127_REG_TS_YR		0x18
 /*
  * RAM registers
  * PCF2127 has 512 bytes general-purpose static RAM (SRAM) that is
@@ -440,9 +434,9 @@  static int pcf2127_rtc_ts_read(struct device *dev, time64_t *ts)
 	struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
 	struct rtc_time tm;
 	int ret;
-	unsigned char data[25];
+	unsigned char data[7];
 
-	ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL1, data,
+	ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_TS_CTRL, data,
 			       sizeof(data));
 	if (ret) {
 		dev_err(dev, "%s: read error ret=%d\n", __func__, ret);
@@ -450,20 +444,16 @@  static int pcf2127_rtc_ts_read(struct device *dev, time64_t *ts)
 	}
 
 	dev_dbg(dev,
-		"%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, ts_sc=%02x, ts_mn=%02x, ts_hr=%02x, ts_dm=%02x, ts_mo=%02x, ts_yr=%02x\n",
-		__func__, data[PCF2127_REG_CTRL1], data[PCF2127_REG_CTRL2],
-		data[PCF2127_REG_CTRL3], data[PCF2127_REG_TS_SC],
-		data[PCF2127_REG_TS_MN], data[PCF2127_REG_TS_HR],
-		data[PCF2127_REG_TS_DM], data[PCF2127_REG_TS_MO],
-		data[PCF2127_REG_TS_YR]);
-
-	tm.tm_sec = bcd2bin(data[PCF2127_REG_TS_SC] & 0x7F);
-	tm.tm_min = bcd2bin(data[PCF2127_REG_TS_MN] & 0x7F);
-	tm.tm_hour = bcd2bin(data[PCF2127_REG_TS_HR] & 0x3F);
-	tm.tm_mday = bcd2bin(data[PCF2127_REG_TS_DM] & 0x3F);
+		"%s: raw data is ts_sc=%02x, ts_mn=%02x, ts_hr=%02x, ts_dm=%02x, ts_mo=%02x, ts_yr=%02x\n",
+		__func__, data[1], data[2], data[3], data[4], data[5], data[6]);
+
+	tm.tm_sec = bcd2bin(data[1] & 0x7F);
+	tm.tm_min = bcd2bin(data[2] & 0x7F);
+	tm.tm_hour = bcd2bin(data[3] & 0x3F);
+	tm.tm_mday = bcd2bin(data[4] & 0x3F);
 	/* TS_MO register (month) value range: 1-12 */
-	tm.tm_mon = bcd2bin(data[PCF2127_REG_TS_MO] & 0x1F) - 1;
-	tm.tm_year = bcd2bin(data[PCF2127_REG_TS_YR]);
+	tm.tm_mon = bcd2bin(data[5] & 0x1F) - 1;
+	tm.tm_year = bcd2bin(data[6]);
 	if (tm.tm_year < 70)
 		tm.tm_year += 100; /* assume we are in 1970...2069 */