diff mbox series

[v3,3/4] input: touchscreen: add I2C support for Goodix Berlin Touchscreen IC

Message ID 20230606-topic-goodix-berlin-upstream-initial-v3-3-f0577cead709@linaro.org
State Superseded
Headers show
Series input: touchscreen: add initial support for Goodix Berlin touchscreen IC | expand

Commit Message

Neil Armstrong June 22, 2023, 2:29 p.m. UTC
Add initial support for the new Goodix "Berlin" touchscreen ICs
over the I2C interface.

This initial driver is derived from the Goodix goodix_ts_berlin
available at [1] and [2] and only supports the GT9916 IC
present on the Qualcomm SM8550 MTP & QRD touch panel.

The current implementation only supports BerlinD, aka GT9916.

[1] https://github.com/goodix/goodix_ts_berlin
[2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/input/touchscreen/Kconfig             | 14 ++++++
 drivers/input/touchscreen/Makefile            |  1 +
 drivers/input/touchscreen/goodix_berlin_i2c.c | 69 +++++++++++++++++++++++++++
 3 files changed, 84 insertions(+)

Comments

Jeff LaBundy June 25, 2023, 7:17 p.m. UTC | #1
Hi Neil,

On Thu, Jun 22, 2023 at 04:29:01PM +0200, Neil Armstrong wrote:
> Add initial support for the new Goodix "Berlin" touchscreen ICs
> over the I2C interface.
> 
> This initial driver is derived from the Goodix goodix_ts_berlin
> available at [1] and [2] and only supports the GT9916 IC
> present on the Qualcomm SM8550 MTP & QRD touch panel.
> 
> The current implementation only supports BerlinD, aka GT9916.
> 
> [1] https://github.com/goodix/goodix_ts_berlin
> [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---

Just one comment below, then feel free to add:

Reviewed-by: Jeff LaBundy <jeff@labundy.com>

>  drivers/input/touchscreen/Kconfig             | 14 ++++++
>  drivers/input/touchscreen/Makefile            |  1 +
>  drivers/input/touchscreen/goodix_berlin_i2c.c | 69 +++++++++++++++++++++++++++
>  3 files changed, 84 insertions(+)
> 
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index 1a6f6f6da991..5e21cca6025d 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -421,6 +421,20 @@ config TOUCHSCREEN_GOODIX_BERLIN_CORE
>  	depends on REGMAP
>  	tristate
>  
> +config TOUCHSCREEN_GOODIX_BERLIN_I2C
> +	tristate "Goodix Berlin I2C touchscreen"
> +	depends on I2C
> +	depends on REGMAP_I2C

select REGMAP_I2C

(keep "depends on I2C")

> +	select TOUCHSCREEN_GOODIX_BERLIN_CORE
> +	help
> +	  Say Y here if you have a Goodix Berlin IC connected to
> +	  your system via I2C.
> +
> +	  If unsure, say N.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called goodix_berlin_i2c.
> +
>  config TOUCHSCREEN_HIDEEP
>  	tristate "HiDeep Touch IC"
>  	depends on I2C
> diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> index 29cdb042e104..921a2da0c2be 100644
> --- a/drivers/input/touchscreen/Makefile
> +++ b/drivers/input/touchscreen/Makefile
> @@ -48,6 +48,7 @@ obj-$(CONFIG_TOUCHSCREEN_EXC3000)	+= exc3000.o
>  obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
>  obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix_ts.o
>  obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE)	+= goodix_berlin_core.o
> +obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C)	+= goodix_berlin_i2c.o
>  obj-$(CONFIG_TOUCHSCREEN_HIDEEP)	+= hideep.o
>  obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX)	+= hynitron_cstxxx.o
>  obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
> diff --git a/drivers/input/touchscreen/goodix_berlin_i2c.c b/drivers/input/touchscreen/goodix_berlin_i2c.c
> new file mode 100644
> index 000000000000..6407b2258eb1
> --- /dev/null
> +++ b/drivers/input/touchscreen/goodix_berlin_i2c.c
> @@ -0,0 +1,69 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Goodix Berlin Touchscreen Driver
> + *
> + * Copyright (C) 2020 - 2021 Goodix, Inc.
> + * Copyright (C) 2023 Linaro Ltd.
> + *
> + * Based on goodix_ts_berlin driver.
> + */
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +
> +#include "goodix_berlin.h"
> +
> +#define I2C_MAX_TRANSFER_SIZE		256
> +
> +static const struct regmap_config goodix_berlin_i2c_regmap_conf = {
> +	.reg_bits = 32,
> +	.val_bits = 8,
> +	.max_raw_read = I2C_MAX_TRANSFER_SIZE,
> +	.max_raw_write = I2C_MAX_TRANSFER_SIZE,
> +};
> +
> +/* vendor & product left unassigned here, should probably be updated from fw info */
> +static const struct input_id goodix_berlin_i2c_input_id = {
> +	.bustype = BUS_I2C,
> +};
> +
> +static int goodix_berlin_i2c_probe(struct i2c_client *client)
> +{
> +	struct regmap *regmap;
> +
> +	regmap = devm_regmap_init_i2c(client, &goodix_berlin_i2c_regmap_conf);
> +	if (IS_ERR(regmap))
> +		return PTR_ERR(regmap);
> +
> +	return goodix_berlin_probe(&client->dev, client->irq,
> +				   &goodix_berlin_i2c_input_id, regmap);
> +}
> +
> +static const struct i2c_device_id goodix_berlin_i2c_id[] = {
> +	{ "gt9916", 0 },
> +	{ }
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, goodix_berlin_i2c_id);
> +
> +static const struct of_device_id goodix_berlin_i2c_of_match[] = {
> +	{ .compatible = "goodix,gt9916", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, goodix_berlin_i2c_of_match);
> +
> +static struct i2c_driver goodix_berlin_i2c_driver = {
> +	.driver = {
> +		.name = "goodix-berlin-i2c",
> +		.of_match_table = goodix_berlin_i2c_of_match,
> +		.pm = pm_sleep_ptr(&goodix_berlin_pm_ops),
> +	},
> +	.probe = goodix_berlin_i2c_probe,
> +	.id_table = goodix_berlin_i2c_id,
> +};
> +module_i2c_driver(goodix_berlin_i2c_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Goodix Berlin I2C Touchscreen driver");
> +MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>");
> 
> -- 
> 2.34.1
> 

Kind regards,
Jeff LaBundy
Neil Armstrong June 26, 2023, 6:58 a.m. UTC | #2
Hi Jeff,

On 25/06/2023 21:17, Jeff LaBundy wrote:
> Hi Neil,
> 
> On Thu, Jun 22, 2023 at 04:29:01PM +0200, Neil Armstrong wrote:
>> Add initial support for the new Goodix "Berlin" touchscreen ICs
>> over the I2C interface.
>>
>> This initial driver is derived from the Goodix goodix_ts_berlin
>> available at [1] and [2] and only supports the GT9916 IC
>> present on the Qualcomm SM8550 MTP & QRD touch panel.
>>
>> The current implementation only supports BerlinD, aka GT9916.
>>
>> [1] https://github.com/goodix/goodix_ts_berlin
>> [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>> ---
> 
> Just one comment below, then feel free to add:
> 
> Reviewed-by: Jeff LaBundy <jeff@labundy.com>
> 
>>   drivers/input/touchscreen/Kconfig             | 14 ++++++
>>   drivers/input/touchscreen/Makefile            |  1 +
>>   drivers/input/touchscreen/goodix_berlin_i2c.c | 69 +++++++++++++++++++++++++++
>>   3 files changed, 84 insertions(+)
>>
>> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
>> index 1a6f6f6da991..5e21cca6025d 100644
>> --- a/drivers/input/touchscreen/Kconfig
>> +++ b/drivers/input/touchscreen/Kconfig
>> @@ -421,6 +421,20 @@ config TOUCHSCREEN_GOODIX_BERLIN_CORE
>>   	depends on REGMAP
>>   	tristate
>>   
>> +config TOUCHSCREEN_GOODIX_BERLIN_I2C
>> +	tristate "Goodix Berlin I2C touchscreen"
>> +	depends on I2C
>> +	depends on REGMAP_I2C
> 
> select REGMAP_I2C
> 
> (keep "depends on I2C")

Good point,

Thanks,
Neil

> 
>> +	select TOUCHSCREEN_GOODIX_BERLIN_CORE
>> +	help
>> +	  Say Y here if you have a Goodix Berlin IC connected to
>> +	  your system via I2C.
>> +
>> +	  If unsure, say N.
>> +
>> +	  To compile this driver as a module, choose M here: the
>> +	  module will be called goodix_berlin_i2c.
>> +
>>   config TOUCHSCREEN_HIDEEP
>>   	tristate "HiDeep Touch IC"
>>   	depends on I2C
>> diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
>> index 29cdb042e104..921a2da0c2be 100644
>> --- a/drivers/input/touchscreen/Makefile
>> +++ b/drivers/input/touchscreen/Makefile
>> @@ -48,6 +48,7 @@ obj-$(CONFIG_TOUCHSCREEN_EXC3000)	+= exc3000.o
>>   obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
>>   obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix_ts.o
>>   obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE)	+= goodix_berlin_core.o
>> +obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C)	+= goodix_berlin_i2c.o
>>   obj-$(CONFIG_TOUCHSCREEN_HIDEEP)	+= hideep.o
>>   obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX)	+= hynitron_cstxxx.o
>>   obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
>> diff --git a/drivers/input/touchscreen/goodix_berlin_i2c.c b/drivers/input/touchscreen/goodix_berlin_i2c.c
>> new file mode 100644
>> index 000000000000..6407b2258eb1
>> --- /dev/null
>> +++ b/drivers/input/touchscreen/goodix_berlin_i2c.c
>> @@ -0,0 +1,69 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * Goodix Berlin Touchscreen Driver
>> + *
>> + * Copyright (C) 2020 - 2021 Goodix, Inc.
>> + * Copyright (C) 2023 Linaro Ltd.
>> + *
>> + * Based on goodix_ts_berlin driver.
>> + */
>> +#include <linux/i2c.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/regmap.h>
>> +
>> +#include "goodix_berlin.h"
>> +
>> +#define I2C_MAX_TRANSFER_SIZE		256
>> +
>> +static const struct regmap_config goodix_berlin_i2c_regmap_conf = {
>> +	.reg_bits = 32,
>> +	.val_bits = 8,
>> +	.max_raw_read = I2C_MAX_TRANSFER_SIZE,
>> +	.max_raw_write = I2C_MAX_TRANSFER_SIZE,
>> +};
>> +
>> +/* vendor & product left unassigned here, should probably be updated from fw info */
>> +static const struct input_id goodix_berlin_i2c_input_id = {
>> +	.bustype = BUS_I2C,
>> +};
>> +
>> +static int goodix_berlin_i2c_probe(struct i2c_client *client)
>> +{
>> +	struct regmap *regmap;
>> +
>> +	regmap = devm_regmap_init_i2c(client, &goodix_berlin_i2c_regmap_conf);
>> +	if (IS_ERR(regmap))
>> +		return PTR_ERR(regmap);
>> +
>> +	return goodix_berlin_probe(&client->dev, client->irq,
>> +				   &goodix_berlin_i2c_input_id, regmap);
>> +}
>> +
>> +static const struct i2c_device_id goodix_berlin_i2c_id[] = {
>> +	{ "gt9916", 0 },
>> +	{ }
>> +};
>> +
>> +MODULE_DEVICE_TABLE(i2c, goodix_berlin_i2c_id);
>> +
>> +static const struct of_device_id goodix_berlin_i2c_of_match[] = {
>> +	{ .compatible = "goodix,gt9916", },
>> +	{ }
>> +};
>> +MODULE_DEVICE_TABLE(of, goodix_berlin_i2c_of_match);
>> +
>> +static struct i2c_driver goodix_berlin_i2c_driver = {
>> +	.driver = {
>> +		.name = "goodix-berlin-i2c",
>> +		.of_match_table = goodix_berlin_i2c_of_match,
>> +		.pm = pm_sleep_ptr(&goodix_berlin_pm_ops),
>> +	},
>> +	.probe = goodix_berlin_i2c_probe,
>> +	.id_table = goodix_berlin_i2c_id,
>> +};
>> +module_i2c_driver(goodix_berlin_i2c_driver);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_DESCRIPTION("Goodix Berlin I2C Touchscreen driver");
>> +MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>");
>>
>> -- 
>> 2.34.1
>>
> 
> Kind regards,
> Jeff LaBundy
diff mbox series

Patch

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 1a6f6f6da991..5e21cca6025d 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -421,6 +421,20 @@  config TOUCHSCREEN_GOODIX_BERLIN_CORE
 	depends on REGMAP
 	tristate
 
+config TOUCHSCREEN_GOODIX_BERLIN_I2C
+	tristate "Goodix Berlin I2C touchscreen"
+	depends on I2C
+	depends on REGMAP_I2C
+	select TOUCHSCREEN_GOODIX_BERLIN_CORE
+	help
+	  Say Y here if you have a Goodix Berlin IC connected to
+	  your system via I2C.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called goodix_berlin_i2c.
+
 config TOUCHSCREEN_HIDEEP
 	tristate "HiDeep Touch IC"
 	depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 29cdb042e104..921a2da0c2be 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -48,6 +48,7 @@  obj-$(CONFIG_TOUCHSCREEN_EXC3000)	+= exc3000.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE)	+= goodix_berlin_core.o
+obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C)	+= goodix_berlin_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_HIDEEP)	+= hideep.o
 obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX)	+= hynitron_cstxxx.o
 obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
diff --git a/drivers/input/touchscreen/goodix_berlin_i2c.c b/drivers/input/touchscreen/goodix_berlin_i2c.c
new file mode 100644
index 000000000000..6407b2258eb1
--- /dev/null
+++ b/drivers/input/touchscreen/goodix_berlin_i2c.c
@@ -0,0 +1,69 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Goodix Berlin Touchscreen Driver
+ *
+ * Copyright (C) 2020 - 2021 Goodix, Inc.
+ * Copyright (C) 2023 Linaro Ltd.
+ *
+ * Based on goodix_ts_berlin driver.
+ */
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "goodix_berlin.h"
+
+#define I2C_MAX_TRANSFER_SIZE		256
+
+static const struct regmap_config goodix_berlin_i2c_regmap_conf = {
+	.reg_bits = 32,
+	.val_bits = 8,
+	.max_raw_read = I2C_MAX_TRANSFER_SIZE,
+	.max_raw_write = I2C_MAX_TRANSFER_SIZE,
+};
+
+/* vendor & product left unassigned here, should probably be updated from fw info */
+static const struct input_id goodix_berlin_i2c_input_id = {
+	.bustype = BUS_I2C,
+};
+
+static int goodix_berlin_i2c_probe(struct i2c_client *client)
+{
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i2c(client, &goodix_berlin_i2c_regmap_conf);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return goodix_berlin_probe(&client->dev, client->irq,
+				   &goodix_berlin_i2c_input_id, regmap);
+}
+
+static const struct i2c_device_id goodix_berlin_i2c_id[] = {
+	{ "gt9916", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, goodix_berlin_i2c_id);
+
+static const struct of_device_id goodix_berlin_i2c_of_match[] = {
+	{ .compatible = "goodix,gt9916", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, goodix_berlin_i2c_of_match);
+
+static struct i2c_driver goodix_berlin_i2c_driver = {
+	.driver = {
+		.name = "goodix-berlin-i2c",
+		.of_match_table = goodix_berlin_i2c_of_match,
+		.pm = pm_sleep_ptr(&goodix_berlin_pm_ops),
+	},
+	.probe = goodix_berlin_i2c_probe,
+	.id_table = goodix_berlin_i2c_id,
+};
+module_i2c_driver(goodix_berlin_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Goodix Berlin I2C Touchscreen driver");
+MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>");