| Message ID | 20230626032735.49500-3-guoniu.zhou@oss.nxp.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | add ISI support for iMX93 | expand |
Hi Tommaso, Thanks for your comments. I have updated version 3 and your comments have been handled in the new version patches. > -----Original Message----- > From: Tommaso Merciai <tomm.merciai@gmail.com> > Sent: 2023年6月27日 16:26 > To: G.N. Zhou (OSS) <guoniu.zhou@oss.nxp.com> > Cc: linux-media@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>; > devicetree@vger.kernel.org; laurent.pinchart@ideasonboard.com; > mchehab@kernel.org; robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; > conor+dt@kernel.org; Xavier Roumegue (OSS) > <xavier.roumegue@oss.nxp.com>; kernel@pengutronix.de; > jacopo.mondi@ideasonboard.com; sakari.ailus@linux.intel.com > Subject: Re: [PATCH v2 2/2] media: nxp: imx-isi: add ISI support for i.MX93 > > Caution: This is an external email. Please take care when clicking links or opening > attachments. When in doubt, report the message using the 'Report this email' > button > > > Hi Guoniu, > > On Mon, Jun 26, 2023 at 11:27:35AM +0800, guoniu.zhou@oss.nxp.com wrote: > > From: "Guoniu.zhou" <guoniu.zhou@nxp.com> > > > > Abstract gasket operation and driver should implement them for SoC > > which support gasket. > > > > i.MX93 use a different gasket which has different register definition > > compared with i.MX8. Hence implement the gasket callbacks in order to > > add ISI support for i.MX93. > > > > Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com> > > --- > > .../platform/nxp/imx8-isi/imx8-isi-core.c | 110 ++++++++++++++++++ > > .../platform/nxp/imx8-isi/imx8-isi-core.h | 33 ++++++ > > .../platform/nxp/imx8-isi/imx8-isi-crossbar.c | 51 ++++---- > > 3 files changed, 169 insertions(+), 25 deletions(-) > > > > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > index 253e77189b69..d37145fb7f14 100644 > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > @@ -14,6 +14,7 @@ > > #include <linux/pm.h> > > #include <linux/pm_runtime.h> > > #include <linux/property.h> > > +#include <linux/regmap.h> > > #include <linux/slab.h> > > #include <linux/string.h> > > #include <linux/types.h> > > @@ -279,6 +280,54 @@ static const struct clk_bulk_data mxc_imx8mn_clks[] > = { > > { .id = "apb" }, > > }; > > > > +static int mxc_imx8_gasket_config(struct mxc_isi_dev *isi, > > + const struct v4l2_mbus_frame_desc *fd, > > + const struct v4l2_mbus_framefmt *fmt, > > + const unsigned int port) { > > + u32 val; > > + > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, > fmt->width); > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, > > + fmt->height); > > + > > + val = GASKET_CTRL_DATA_TYPE(fd->entry[0].bus.csi2.dt); > > + if (fd->entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) > > + val |= GASKET_CTRL_DUAL_COMP_ENABLE; > > + > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > + > > + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n", > > + fmt->width, fmt->height, > > + fd->entry[0].bus.csi2.dt); > > Receive warning from checkpatch.pl: Drop the debug message in v3 > > CHECK: Alignment should match open parenthesis > #49: FILE: drivers/media/platform/nx p/imx8-isi/imx8-isi-core.c:300: > + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n", > + fmt->width, fmt->height, > > > + > > + return 0; > > +} > > + > > +static int mxc_imx8_gasket_enable(struct mxc_isi_dev *isi, > > + const unsigned int port) { > > + u32 val; > > + > > + regmap_read(isi->gasket, GASKET_BASE(port), &val); > > + val |= GASKET_CTRL_ENABLE; > > + > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > + > > + return 0; > > +} > > + > > +static void mxc_imx8_gasket_disable(struct mxc_isi_dev *isi, > > + const unsigned int port) { > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); } > > + > > +static const struct mxc_gasket_ops mxc_imx8_gasket_ops = { > > + .config = mxc_imx8_gasket_config, > > + .enable = mxc_imx8_gasket_enable, > > + .disable = mxc_imx8_gasket_disable, }; > > + > > static const struct mxc_isi_plat_data mxc_imx8mn_data = { > > .model = MXC_ISI_IMX8MN, > > .num_ports = 1, > > @@ -290,6 +339,7 @@ static const struct mxc_isi_plat_data > mxc_imx8mn_data = { > > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > .buf_active_reverse = false, > > .has_gasket = true, > > + .gasket_ops = &mxc_imx8_gasket_ops, > > .has_36bit_dma = false, > > }; > > > > @@ -304,6 +354,65 @@ static const struct mxc_isi_plat_data > mxc_imx8mp_data = { > > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > .buf_active_reverse = true, > > .has_gasket = true, > > + .gasket_ops = &mxc_imx8_gasket_ops, > > + .has_36bit_dma = true, > > +}; > > + > > +static int mxc_imx93_gasket_config(struct mxc_isi_dev *isi, > > + const struct v4l2_mbus_frame_desc > *fd, > > + const struct v4l2_mbus_framefmt > *fmt, > > + const unsigned int port) { > > + u32 val; > > + > > + val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt); > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > > + > > + dev_dbg(isi->dev, "data type=0x%x\n", fd->entry[0].bus.csi2.dt); > > + > > + return 0; > > +} > > + > > +static int mxc_imx93_gasket_enable(struct mxc_isi_dev *isi, > > + const unsigned int port) { > > + u32 val; > > + > > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); > > + val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE; > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > > + > > + return 0; > > +} > > + > > +static void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi, > > + unsigned int port) { > > + u32 val; > > + > > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); > > + val &= ~DISP_MIX_CAMERA_MUX_GASKET_ENABLE; > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); } > > + > > +static const struct mxc_gasket_ops mxc_imx93_gasket_ops = { > > + .config = mxc_imx93_gasket_config, > > + .enable = mxc_imx93_gasket_enable, > > + .disable = mxc_imx93_gasket_disable, }; > > + > > +static const struct mxc_isi_plat_data mxc_imx93_data = { > > + .model = MXC_ISI_IMX93, > > + .num_ports = 1, > > + .num_channels = 1, > > + .reg_offset = 0, > > + .ier_reg = &mxc_imx8_isi_ier_v2, > > + .set_thd = &mxc_imx8_isi_thd_v1, > > + .clks = mxc_imx8mn_clks, > > + .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > + .buf_active_reverse = true, > > + .has_gasket = true, > > + .gasket_ops = &mxc_imx93_gasket_ops, > > .has_36bit_dma = true, > > }; > > > > @@ -518,6 +627,7 @@ static int mxc_isi_remove(struct platform_device > > *pdev) static const struct of_device_id mxc_isi_of_match[] = { > > { .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data }, > > { .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data }, > > + { .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data }, > > { /* sentinel */ }, > > }; > > MODULE_DEVICE_TABLE(of, mxc_isi_of_match); diff --git > > a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > index e469788a9e6c..c425edb6fbea 100644 > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > @@ -18,6 +18,7 @@ > > > > #include <media/media-device.h> > > #include <media/media-entity.h> > > +#include <media/mipi-csi2.h> > > #include <media/v4l2-async.h> > > #include <media/v4l2-ctrls.h> > > #include <media/v4l2-dev.h> > > @@ -59,6 +60,27 @@ struct v4l2_m2m_dev; > > #define MXC_ISI_M2M "mxc-isi-m2m" > > #define MXC_MAX_PLANES 3 > > > > +/* GASKET (i.MX8MN and i.MX8MP only) */ > > +#define GASKET_BASE(n) (0x0060 + (n) * > 0x30) > > + > > +#define GASKET_CTRL 0x0000 > > +#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) > > +#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) > > +#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) > > +#define GASKET_CTRL_ENABLE BIT(0) > > + > > +#define GASKET_HSIZE 0x0004 > > +#define GASKET_VSIZE 0x0008 > > + > > +/* dispmix_GPR register (i.MX93 only) */ > > +#define DISP_MIX_CAMERA_MUX 0x30 > > +#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x) (((x) & 0x3f) << 3) > > +#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE BIT(16) > > + > > +#define DISP_MIX_CSI_REG 0x48 > > +#define DISP_MIX_CSI_REG_CFGFREQRANGE(x) ((x) & 0x3f) > > +#define DISP_MIX_CSI_REG_HSFREQRANGE(x) (((x) & 0x7f) << 8) > > + > > ^Can you use tabs instead of space here? Done in v3 > > > > struct mxc_isi_dev; > > struct mxc_isi_m2m_ctx; > > > > @@ -147,9 +169,19 @@ struct mxc_isi_set_thd { > > struct mxc_isi_panic_thd panic_set_thd_v; }; > > > > +struct mxc_gasket_ops { > > + int (*enable)(struct mxc_isi_dev *isi, const unsigned int port); > > + int (*config)(struct mxc_isi_dev *isi, > > + const struct v4l2_mbus_frame_desc *fd, > > + const struct v4l2_mbus_framefmt *fmt, > > + const unsigned int port); > > + void (*disable)(struct mxc_isi_dev *isi, const unsigned int > > +port); }; > > + > > enum model { > > MXC_ISI_IMX8MN, > > MXC_ISI_IMX8MP, > > + MXC_ISI_IMX93, > > }; > > > > struct mxc_isi_plat_data { > > @@ -160,6 +192,7 @@ struct mxc_isi_plat_data { > > const struct mxc_isi_ier_reg *ier_reg; > > const struct mxc_isi_set_thd *set_thd; > > const struct clk_bulk_data *clks; > > + const struct mxc_gasket_ops *gasket_ops; > > unsigned int num_clks; > > bool buf_active_reverse; > > bool has_gasket; > > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > index f7447b2f4d77..855b31e3dade 100644 > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > @@ -25,20 +25,6 @@ static inline struct mxc_isi_crossbar > *to_isi_crossbar(struct v4l2_subdev *sd) > > return container_of(sd, struct mxc_isi_crossbar, sd); } > > > > -/* > > ---------------------------------------------------------------------- > > ------- > > - * Media block control (i.MX8MN and i.MX8MP only) > > - */ > > -#define GASKET_BASE(n) (0x0060 + (n) * > 0x30) > > - > > -#define GASKET_CTRL 0x0000 > > -#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) > > -#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) > > -#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) > > -#define GASKET_CTRL_ENABLE BIT(0) > > - > > -#define GASKET_HSIZE 0x0004 > > -#define GASKET_VSIZE 0x0008 > > - > > static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > > struct v4l2_subdev_state > *state, > > struct v4l2_subdev > *remote_sd, > > @@ -46,13 +32,16 @@ static int mxc_isi_crossbar_gasket_enable(struct > > mxc_isi_crossbar *xbar, { > > struct mxc_isi_dev *isi = xbar->isi; > > const struct v4l2_mbus_framefmt *fmt; > > + const struct mxc_gasket_ops *gasket_ops = NULL; > > struct v4l2_mbus_frame_desc fd; > > - u32 val; > > int ret; > > > > if (!isi->pdata->has_gasket) > > return 0; > > > > + if (isi->pdata->gasket_ops) > > + gasket_ops = isi->pdata->gasket_ops; > > + > > /* > > * Configure and enable the gasket with the frame size and CSI-2 data > > * type. For YUV422 8-bit, enable dual component mode > > unconditionally, @@ -77,16 +66,23 @@ static int > mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > > if (!fmt) > > return -EINVAL; > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, > fmt->width); > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, > fmt->height); > > - > > - val = GASKET_CTRL_DATA_TYPE(fd.entry[0].bus.csi2.dt) > > - | GASKET_CTRL_ENABLE; > > - > > - if (fd.entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) > > - val |= GASKET_CTRL_DUAL_COMP_ENABLE; > > + if (gasket_ops && gasket_ops->config) { > > + ret = gasket_ops->config(isi, &fd, fmt, port); > > + if (ret) { > > + dev_err(isi->dev, > > + "failed to configure gasket%d\n", port); > > What about keep this print on the same line? Ok, I will update when handle comments in v3 if have. If no, I will send a new version if it's necessary. > > > + return ret; > > + } > > + } > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > + if (gasket_ops && gasket_ops->enable) { > > + ret = gasket_ops->enable(isi, port); > > + if (ret) { > > + dev_err(isi->dev, > > + "failed to enable gasket%d\n", port); > > Same here :) > > > + return ret; > > + } > > + } > > > > return 0; > > } > > @@ -95,11 +91,16 @@ static void mxc_isi_crossbar_gasket_disable(struct > mxc_isi_crossbar *xbar, > > unsigned int port) { > > struct mxc_isi_dev *isi = xbar->isi; > > + const struct mxc_gasket_ops *gasket_ops = NULL; > > > > if (!isi->pdata->has_gasket) > > return; > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); > > + if (isi->pdata->gasket_ops) > > + gasket_ops = isi->pdata->gasket_ops; > > + > > + if (gasket_ops && gasket_ops->disable) > > + gasket_ops->disable(isi, port); > > } > > > Thanks & Regards, > Tommaso > > > > > /* ----------------------------------------------------------------------------- > > -- > > 2.37.1 > >
Hi Guoniu, On Tue, Jun 27, 2023 at 08:39:37AM +0000, G.N. Zhou (OSS) wrote: > Hi Tommaso, > > Thanks for your comments. I have updated version 3 and your comments have been handled in the new version patches Thanks for let me know. I'll check v3 :) Regards, Tommaso > > > -----Original Message----- > > From: Tommaso Merciai <tomm.merciai@gmail.com> > > Sent: 2023年6月27日 16:26 > > To: G.N. Zhou (OSS) <guoniu.zhou@oss.nxp.com> > > Cc: linux-media@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>; > > devicetree@vger.kernel.org; laurent.pinchart@ideasonboard.com; > > mchehab@kernel.org; robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; > > conor+dt@kernel.org; Xavier Roumegue (OSS) > > <xavier.roumegue@oss.nxp.com>; kernel@pengutronix.de; > > jacopo.mondi@ideasonboard.com; sakari.ailus@linux.intel.com > > Subject: Re: [PATCH v2 2/2] media: nxp: imx-isi: add ISI support for i.MX93 > > > > Caution: This is an external email. Please take care when clicking links or opening > > attachments. When in doubt, report the message using the 'Report this email' > > button > > > > > > Hi Guoniu, > > > > On Mon, Jun 26, 2023 at 11:27:35AM +0800, guoniu.zhou@oss.nxp.com wrote: > > > From: "Guoniu.zhou" <guoniu.zhou@nxp.com> > > > > > > Abstract gasket operation and driver should implement them for SoC > > > which support gasket. > > > > > > i.MX93 use a different gasket which has different register definition > > > compared with i.MX8. Hence implement the gasket callbacks in order to > > > add ISI support for i.MX93. > > > > > > Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com> > > > --- > > > .../platform/nxp/imx8-isi/imx8-isi-core.c | 110 ++++++++++++++++++ > > > .../platform/nxp/imx8-isi/imx8-isi-core.h | 33 ++++++ > > > .../platform/nxp/imx8-isi/imx8-isi-crossbar.c | 51 ++++---- > > > 3 files changed, 169 insertions(+), 25 deletions(-) > > > > > > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > > index 253e77189b69..d37145fb7f14 100644 > > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c > > > @@ -14,6 +14,7 @@ > > > #include <linux/pm.h> > > > #include <linux/pm_runtime.h> > > > #include <linux/property.h> > > > +#include <linux/regmap.h> > > > #include <linux/slab.h> > > > #include <linux/string.h> > > > #include <linux/types.h> > > > @@ -279,6 +280,54 @@ static const struct clk_bulk_data mxc_imx8mn_clks[] > > = { > > > { .id = "apb" }, > > > }; > > > > > > +static int mxc_imx8_gasket_config(struct mxc_isi_dev *isi, > > > + const struct v4l2_mbus_frame_desc *fd, > > > + const struct v4l2_mbus_framefmt *fmt, > > > + const unsigned int port) { > > > + u32 val; > > > + > > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, > > fmt->width); > > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, > > > + fmt->height); > > > + > > > + val = GASKET_CTRL_DATA_TYPE(fd->entry[0].bus.csi2.dt); > > > + if (fd->entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) > > > + val |= GASKET_CTRL_DUAL_COMP_ENABLE; > > > + > > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > > + > > > + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n", > > > + fmt->width, fmt->height, > > > + fd->entry[0].bus.csi2.dt); > > > > Receive warning from checkpatch.pl: > > Drop the debug message in v3 > > > > > CHECK: Alignment should match open parenthesis > > #49: FILE: drivers/media/platform/nx > p/imx8-isi/imx8-isi-core.c:300: > > + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n", > > + fmt->width, fmt->height, > > > > > + > > > + return 0; > > > +} > > > + > > > +static int mxc_imx8_gasket_enable(struct mxc_isi_dev *isi, > > > + const unsigned int port) { > > > + u32 val; > > > + > > > + regmap_read(isi->gasket, GASKET_BASE(port), &val); > > > + val |= GASKET_CTRL_ENABLE; > > > + > > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > > + > > > + return 0; > > > +} > > > + > > > +static void mxc_imx8_gasket_disable(struct mxc_isi_dev *isi, > > > + const unsigned int port) { > > > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); } > > > + > > > +static const struct mxc_gasket_ops mxc_imx8_gasket_ops = { > > > + .config = mxc_imx8_gasket_config, > > > + .enable = mxc_imx8_gasket_enable, > > > + .disable = mxc_imx8_gasket_disable, }; > > > + > > > static const struct mxc_isi_plat_data mxc_imx8mn_data = { > > > .model = MXC_ISI_IMX8MN, > > > .num_ports = 1, > > > @@ -290,6 +339,7 @@ static const struct mxc_isi_plat_data > > mxc_imx8mn_data = { > > > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > > .buf_active_reverse = false, > > > .has_gasket = true, > > > + .gasket_ops = &mxc_imx8_gasket_ops, > > > .has_36bit_dma = false, > > > }; > > > > > > @@ -304,6 +354,65 @@ static const struct mxc_isi_plat_data > > mxc_imx8mp_data = { > > > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > > .buf_active_reverse = true, > > > .has_gasket = true, > > > + .gasket_ops = &mxc_imx8_gasket_ops, > > > + .has_36bit_dma = true, > > > +}; > > > + > > > +static int mxc_imx93_gasket_config(struct mxc_isi_dev *isi, > > > + const struct v4l2_mbus_frame_desc > > *fd, > > > + const struct v4l2_mbus_framefmt > > *fmt, > > > + const unsigned int port) { > > > + u32 val; > > > + > > > + val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt); > > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > > > + > > > + dev_dbg(isi->dev, "data type=0x%x\n", fd->entry[0].bus.csi2.dt); > > > + > > > + return 0; > > > +} > > > + > > > +static int mxc_imx93_gasket_enable(struct mxc_isi_dev *isi, > > > + const unsigned int port) { > > > + u32 val; > > > + > > > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); > > > + val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE; > > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); > > > + > > > + return 0; > > > +} > > > + > > > +static void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi, > > > + unsigned int port) { > > > + u32 val; > > > + > > > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); > > > + val &= ~DISP_MIX_CAMERA_MUX_GASKET_ENABLE; > > > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); } > > > + > > > +static const struct mxc_gasket_ops mxc_imx93_gasket_ops = { > > > + .config = mxc_imx93_gasket_config, > > > + .enable = mxc_imx93_gasket_enable, > > > + .disable = mxc_imx93_gasket_disable, }; > > > + > > > +static const struct mxc_isi_plat_data mxc_imx93_data = { > > > + .model = MXC_ISI_IMX93, > > > + .num_ports = 1, > > > + .num_channels = 1, > > > + .reg_offset = 0, > > > + .ier_reg = &mxc_imx8_isi_ier_v2, > > > + .set_thd = &mxc_imx8_isi_thd_v1, > > > + .clks = mxc_imx8mn_clks, > > > + .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), > > > + .buf_active_reverse = true, > > > + .has_gasket = true, > > > + .gasket_ops = &mxc_imx93_gasket_ops, > > > .has_36bit_dma = true, > > > }; > > > > > > @@ -518,6 +627,7 @@ static int mxc_isi_remove(struct platform_device > > > *pdev) static const struct of_device_id mxc_isi_of_match[] = { > > > { .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data }, > > > { .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data }, > > > + { .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data }, > > > { /* sentinel */ }, > > > }; > > > MODULE_DEVICE_TABLE(of, mxc_isi_of_match); diff --git > > > a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > > index e469788a9e6c..c425edb6fbea 100644 > > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h > > > @@ -18,6 +18,7 @@ > > > > > > #include <media/media-device.h> > > > #include <media/media-entity.h> > > > +#include <media/mipi-csi2.h> > > > #include <media/v4l2-async.h> > > > #include <media/v4l2-ctrls.h> > > > #include <media/v4l2-dev.h> > > > @@ -59,6 +60,27 @@ struct v4l2_m2m_dev; > > > #define MXC_ISI_M2M "mxc-isi-m2m" > > > #define MXC_MAX_PLANES 3 > > > > > > +/* GASKET (i.MX8MN and i.MX8MP only) */ > > > +#define GASKET_BASE(n) (0x0060 + (n) * > > 0x30) > > > + > > > +#define GASKET_CTRL 0x0000 > > > +#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) > > > +#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) > > > +#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) > > > +#define GASKET_CTRL_ENABLE BIT(0) > > > + > > > +#define GASKET_HSIZE 0x0004 > > > +#define GASKET_VSIZE 0x0008 > > > + > > > +/* dispmix_GPR register (i.MX93 only) */ > > > +#define DISP_MIX_CAMERA_MUX 0x30 > > > +#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x) (((x) & 0x3f) << 3) > > > +#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE BIT(16) > > > + > > > +#define DISP_MIX_CSI_REG 0x48 > > > +#define DISP_MIX_CSI_REG_CFGFREQRANGE(x) ((x) & 0x3f) > > > +#define DISP_MIX_CSI_REG_HSFREQRANGE(x) (((x) & 0x7f) << 8) > > > + > > > > ^Can you use tabs instead of space here? > > Done in v3 > > > > > > > > struct mxc_isi_dev; > > > struct mxc_isi_m2m_ctx; > > > > > > @@ -147,9 +169,19 @@ struct mxc_isi_set_thd { > > > struct mxc_isi_panic_thd panic_set_thd_v; }; > > > > > > +struct mxc_gasket_ops { > > > + int (*enable)(struct mxc_isi_dev *isi, const unsigned int port); > > > + int (*config)(struct mxc_isi_dev *isi, > > > + const struct v4l2_mbus_frame_desc *fd, > > > + const struct v4l2_mbus_framefmt *fmt, > > > + const unsigned int port); > > > + void (*disable)(struct mxc_isi_dev *isi, const unsigned int > > > +port); }; > > > + > > > enum model { > > > MXC_ISI_IMX8MN, > > > MXC_ISI_IMX8MP, > > > + MXC_ISI_IMX93, > > > }; > > > > > > struct mxc_isi_plat_data { > > > @@ -160,6 +192,7 @@ struct mxc_isi_plat_data { > > > const struct mxc_isi_ier_reg *ier_reg; > > > const struct mxc_isi_set_thd *set_thd; > > > const struct clk_bulk_data *clks; > > > + const struct mxc_gasket_ops *gasket_ops; > > > unsigned int num_clks; > > > bool buf_active_reverse; > > > bool has_gasket; > > > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > > index f7447b2f4d77..855b31e3dade 100644 > > > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c > > > @@ -25,20 +25,6 @@ static inline struct mxc_isi_crossbar > > *to_isi_crossbar(struct v4l2_subdev *sd) > > > return container_of(sd, struct mxc_isi_crossbar, sd); } > > > > > > -/* > > > ---------------------------------------------------------------------- > > > ------- > > > - * Media block control (i.MX8MN and i.MX8MP only) > > > - */ > > > -#define GASKET_BASE(n) (0x0060 + (n) * > > 0x30) > > > - > > > -#define GASKET_CTRL 0x0000 > > > -#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) > > > -#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) > > > -#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) > > > -#define GASKET_CTRL_ENABLE BIT(0) > > > - > > > -#define GASKET_HSIZE 0x0004 > > > -#define GASKET_VSIZE 0x0008 > > > - > > > static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > > > struct v4l2_subdev_state > > *state, > > > struct v4l2_subdev > > *remote_sd, > > > @@ -46,13 +32,16 @@ static int mxc_isi_crossbar_gasket_enable(struct > > > mxc_isi_crossbar *xbar, { > > > struct mxc_isi_dev *isi = xbar->isi; > > > const struct v4l2_mbus_framefmt *fmt; > > > + const struct mxc_gasket_ops *gasket_ops = NULL; > > > struct v4l2_mbus_frame_desc fd; > > > - u32 val; > > > int ret; > > > > > > if (!isi->pdata->has_gasket) > > > return 0; > > > > > > + if (isi->pdata->gasket_ops) > > > + gasket_ops = isi->pdata->gasket_ops; > > > + > > > /* > > > * Configure and enable the gasket with the frame size and CSI-2 data > > > * type. For YUV422 8-bit, enable dual component mode > > > unconditionally, @@ -77,16 +66,23 @@ static int > > mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, > > > if (!fmt) > > > return -EINVAL; > > > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, > > fmt->width); > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, > > fmt->height); > > > - > > > - val = GASKET_CTRL_DATA_TYPE(fd.entry[0].bus.csi2.dt) > > > - | GASKET_CTRL_ENABLE; > > > - > > > - if (fd.entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) > > > - val |= GASKET_CTRL_DUAL_COMP_ENABLE; > > > + if (gasket_ops && gasket_ops->config) { > > > + ret = gasket_ops->config(isi, &fd, fmt, port); > > > + if (ret) { > > > + dev_err(isi->dev, > > > + "failed to configure gasket%d\n", port); > > > > What about keep this print on the same line? > > Ok, I will update when handle comments in v3 if have. If no, I will send a new version if it's necessary. > > > > > > + return ret; > > > + } > > > + } > > > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); > > > + if (gasket_ops && gasket_ops->enable) { > > > + ret = gasket_ops->enable(isi, port); > > > + if (ret) { > > > + dev_err(isi->dev, > > > + "failed to enable gasket%d\n", port); > > > > Same here :) > > > > > + return ret; > > > + } > > > + } > > > > > > return 0; > > > } > > > @@ -95,11 +91,16 @@ static void mxc_isi_crossbar_gasket_disable(struct > > mxc_isi_crossbar *xbar, > > > unsigned int port) { > > > struct mxc_isi_dev *isi = xbar->isi; > > > + const struct mxc_gasket_ops *gasket_ops = NULL; > > > > > > if (!isi->pdata->has_gasket) > > > return; > > > > > > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); > > > + if (isi->pdata->gasket_ops) > > > + gasket_ops = isi->pdata->gasket_ops; > > > + > > > + if (gasket_ops && gasket_ops->disable) > > > + gasket_ops->disable(isi, port); > > > } > > > > > > Thanks & Regards, > > Tommaso > > > > > > > > /* ----------------------------------------------------------------------------- > > > -- > > > 2.37.1 > > >
diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c index 253e77189b69..d37145fb7f14 100644 --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c @@ -14,6 +14,7 @@ #include <linux/pm.h> #include <linux/pm_runtime.h> #include <linux/property.h> +#include <linux/regmap.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/types.h> @@ -279,6 +280,54 @@ static const struct clk_bulk_data mxc_imx8mn_clks[] = { { .id = "apb" }, }; +static int mxc_imx8_gasket_config(struct mxc_isi_dev *isi, + const struct v4l2_mbus_frame_desc *fd, + const struct v4l2_mbus_framefmt *fmt, + const unsigned int port) +{ + u32 val; + + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, fmt->width); + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, fmt->height); + + val = GASKET_CTRL_DATA_TYPE(fd->entry[0].bus.csi2.dt); + if (fd->entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) + val |= GASKET_CTRL_DUAL_COMP_ENABLE; + + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); + + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n", + fmt->width, fmt->height, + fd->entry[0].bus.csi2.dt); + + return 0; +} + +static int mxc_imx8_gasket_enable(struct mxc_isi_dev *isi, + const unsigned int port) +{ + u32 val; + + regmap_read(isi->gasket, GASKET_BASE(port), &val); + val |= GASKET_CTRL_ENABLE; + + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); + + return 0; +} + +static void mxc_imx8_gasket_disable(struct mxc_isi_dev *isi, + const unsigned int port) +{ + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); +} + +static const struct mxc_gasket_ops mxc_imx8_gasket_ops = { + .config = mxc_imx8_gasket_config, + .enable = mxc_imx8_gasket_enable, + .disable = mxc_imx8_gasket_disable, +}; + static const struct mxc_isi_plat_data mxc_imx8mn_data = { .model = MXC_ISI_IMX8MN, .num_ports = 1, @@ -290,6 +339,7 @@ static const struct mxc_isi_plat_data mxc_imx8mn_data = { .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), .buf_active_reverse = false, .has_gasket = true, + .gasket_ops = &mxc_imx8_gasket_ops, .has_36bit_dma = false, }; @@ -304,6 +354,65 @@ static const struct mxc_isi_plat_data mxc_imx8mp_data = { .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), .buf_active_reverse = true, .has_gasket = true, + .gasket_ops = &mxc_imx8_gasket_ops, + .has_36bit_dma = true, +}; + +static int mxc_imx93_gasket_config(struct mxc_isi_dev *isi, + const struct v4l2_mbus_frame_desc *fd, + const struct v4l2_mbus_framefmt *fmt, + const unsigned int port) +{ + u32 val; + + val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt); + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); + + dev_dbg(isi->dev, "data type=0x%x\n", fd->entry[0].bus.csi2.dt); + + return 0; +} + +static int mxc_imx93_gasket_enable(struct mxc_isi_dev *isi, + const unsigned int port) +{ + u32 val; + + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); + val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE; + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); + + return 0; +} + +static void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi, + unsigned int port) +{ + u32 val; + + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val); + val &= ~DISP_MIX_CAMERA_MUX_GASKET_ENABLE; + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); +} + +static const struct mxc_gasket_ops mxc_imx93_gasket_ops = { + .config = mxc_imx93_gasket_config, + .enable = mxc_imx93_gasket_enable, + .disable = mxc_imx93_gasket_disable, +}; + +static const struct mxc_isi_plat_data mxc_imx93_data = { + .model = MXC_ISI_IMX93, + .num_ports = 1, + .num_channels = 1, + .reg_offset = 0, + .ier_reg = &mxc_imx8_isi_ier_v2, + .set_thd = &mxc_imx8_isi_thd_v1, + .clks = mxc_imx8mn_clks, + .num_clks = ARRAY_SIZE(mxc_imx8mn_clks), + .buf_active_reverse = true, + .has_gasket = true, + .gasket_ops = &mxc_imx93_gasket_ops, .has_36bit_dma = true, }; @@ -518,6 +627,7 @@ static int mxc_isi_remove(struct platform_device *pdev) static const struct of_device_id mxc_isi_of_match[] = { { .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data }, { .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data }, + { .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, mxc_isi_of_match); diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h index e469788a9e6c..c425edb6fbea 100644 --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h @@ -18,6 +18,7 @@ #include <media/media-device.h> #include <media/media-entity.h> +#include <media/mipi-csi2.h> #include <media/v4l2-async.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-dev.h> @@ -59,6 +60,27 @@ struct v4l2_m2m_dev; #define MXC_ISI_M2M "mxc-isi-m2m" #define MXC_MAX_PLANES 3 +/* GASKET (i.MX8MN and i.MX8MP only) */ +#define GASKET_BASE(n) (0x0060 + (n) * 0x30) + +#define GASKET_CTRL 0x0000 +#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) +#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) +#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) +#define GASKET_CTRL_ENABLE BIT(0) + +#define GASKET_HSIZE 0x0004 +#define GASKET_VSIZE 0x0008 + +/* dispmix_GPR register (i.MX93 only) */ +#define DISP_MIX_CAMERA_MUX 0x30 +#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x) (((x) & 0x3f) << 3) +#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE BIT(16) + +#define DISP_MIX_CSI_REG 0x48 +#define DISP_MIX_CSI_REG_CFGFREQRANGE(x) ((x) & 0x3f) +#define DISP_MIX_CSI_REG_HSFREQRANGE(x) (((x) & 0x7f) << 8) + struct mxc_isi_dev; struct mxc_isi_m2m_ctx; @@ -147,9 +169,19 @@ struct mxc_isi_set_thd { struct mxc_isi_panic_thd panic_set_thd_v; }; +struct mxc_gasket_ops { + int (*enable)(struct mxc_isi_dev *isi, const unsigned int port); + int (*config)(struct mxc_isi_dev *isi, + const struct v4l2_mbus_frame_desc *fd, + const struct v4l2_mbus_framefmt *fmt, + const unsigned int port); + void (*disable)(struct mxc_isi_dev *isi, const unsigned int port); +}; + enum model { MXC_ISI_IMX8MN, MXC_ISI_IMX8MP, + MXC_ISI_IMX93, }; struct mxc_isi_plat_data { @@ -160,6 +192,7 @@ struct mxc_isi_plat_data { const struct mxc_isi_ier_reg *ier_reg; const struct mxc_isi_set_thd *set_thd; const struct clk_bulk_data *clks; + const struct mxc_gasket_ops *gasket_ops; unsigned int num_clks; bool buf_active_reverse; bool has_gasket; diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c index f7447b2f4d77..855b31e3dade 100644 --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c @@ -25,20 +25,6 @@ static inline struct mxc_isi_crossbar *to_isi_crossbar(struct v4l2_subdev *sd) return container_of(sd, struct mxc_isi_crossbar, sd); } -/* ----------------------------------------------------------------------------- - * Media block control (i.MX8MN and i.MX8MP only) - */ -#define GASKET_BASE(n) (0x0060 + (n) * 0x30) - -#define GASKET_CTRL 0x0000 -#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8) -#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8) -#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1) -#define GASKET_CTRL_ENABLE BIT(0) - -#define GASKET_HSIZE 0x0004 -#define GASKET_VSIZE 0x0008 - static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, struct v4l2_subdev_state *state, struct v4l2_subdev *remote_sd, @@ -46,13 +32,16 @@ static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, { struct mxc_isi_dev *isi = xbar->isi; const struct v4l2_mbus_framefmt *fmt; + const struct mxc_gasket_ops *gasket_ops = NULL; struct v4l2_mbus_frame_desc fd; - u32 val; int ret; if (!isi->pdata->has_gasket) return 0; + if (isi->pdata->gasket_ops) + gasket_ops = isi->pdata->gasket_ops; + /* * Configure and enable the gasket with the frame size and CSI-2 data * type. For YUV422 8-bit, enable dual component mode unconditionally, @@ -77,16 +66,23 @@ static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar, if (!fmt) return -EINVAL; - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE, fmt->width); - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE, fmt->height); - - val = GASKET_CTRL_DATA_TYPE(fd.entry[0].bus.csi2.dt) - | GASKET_CTRL_ENABLE; - - if (fd.entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B) - val |= GASKET_CTRL_DUAL_COMP_ENABLE; + if (gasket_ops && gasket_ops->config) { + ret = gasket_ops->config(isi, &fd, fmt, port); + if (ret) { + dev_err(isi->dev, + "failed to configure gasket%d\n", port); + return ret; + } + } - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val); + if (gasket_ops && gasket_ops->enable) { + ret = gasket_ops->enable(isi, port); + if (ret) { + dev_err(isi->dev, + "failed to enable gasket%d\n", port); + return ret; + } + } return 0; } @@ -95,11 +91,16 @@ static void mxc_isi_crossbar_gasket_disable(struct mxc_isi_crossbar *xbar, unsigned int port) { struct mxc_isi_dev *isi = xbar->isi; + const struct mxc_gasket_ops *gasket_ops = NULL; if (!isi->pdata->has_gasket) return; - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); + if (isi->pdata->gasket_ops) + gasket_ops = isi->pdata->gasket_ops; + + if (gasket_ops && gasket_ops->disable) + gasket_ops->disable(isi, port); } /* -----------------------------------------------------------------------------