@@ -7,6 +7,26 @@
};
};
+ sdcc1_pins: sdcc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strengh = <16>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ drive-strengh = <10>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "sdc1_data";
+ drive-strengh = <10>;
+ bias-pull-up;
+ };
+ };
+
ps_hold: ps_hold {
mux {
pins = "gpio78";
@@ -70,25 +70,6 @@
};
};
- sdcc1_pin_a: sdcc1-pin-active {
- clk {
- pins = "sdc1_clk";
- drive-strengh = <16>;
- bias-disable;
- };
-
- cmd {
- pins = "sdc1_cmd";
- drive-strengh = <10>;
- bias-pull-up;
- };
-
- data {
- pins = "sdc1_data";
- drive-strengh = <10>;
- bias-pull-up;
- };
- };
sdcc3_pin_a: sdcc3-pin-active {
clk {
@@ -417,9 +398,6 @@
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdcc1_pin_a>;
};
sdcc3: sdcc@12180000 {
@@ -859,6 +859,8 @@
sdcc1: sdcc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdcc1_pins>;
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
This patch moves out the sdcc1 pinctrl nodes out of board files to soc file, so that it will be duplicated in other board files. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 20 ++++++++++++++++++++ .../arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts | 22 ---------------------- arch/arm/boot/dts/qcom-apq8064.dtsi | 2 ++ 3 files changed, 22 insertions(+), 22 deletions(-) -- 2.8.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html