diff mbox series

[v2,2/4] media: platform: mediatek: isp_30: add mediatek ISP3.0 sensor interface

Message ID 20230630100321.1951138-3-jstephan@baylibre.com
State Superseded
Headers show
Series Add Mediatek ISP3.0 | expand

Commit Message

Julien Stephan June 30, 2023, 10:01 a.m. UTC
From: Louis Kuo <louis.kuo@mediatek.com>

This will add the mediatek ISP3.0 seninf (sensor interface) driver found
on several Mediatek SoCs such as the mt8365.

Then seninf module has 4 physical CSI-2 inputs. Depending on the soc they
may not be all connected.

Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
---
 MAINTAINERS                                   |    1 +
 drivers/media/platform/mediatek/Kconfig       |    1 +
 drivers/media/platform/mediatek/Makefile      |    1 +
 drivers/media/platform/mediatek/isp/Kconfig   |    2 +
 drivers/media/platform/mediatek/isp/Makefile  |    3 +
 .../platform/mediatek/isp/isp_30/Kconfig      |   16 +
 .../platform/mediatek/isp/isp_30/Makefile     |    3 +
 .../mediatek/isp/isp_30/seninf/Makefile       |    5 +
 .../mediatek/isp/isp_30/seninf/mtk_seninf.c   | 1561 +++++++++++++++++
 .../isp/isp_30/seninf/mtk_seninf_reg.h        |   99 ++
 10 files changed, 1692 insertions(+)
 create mode 100644 drivers/media/platform/mediatek/isp/Kconfig
 create mode 100644 drivers/media/platform/mediatek/isp/Makefile
 create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Kconfig
 create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Makefile
 create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
 create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
 create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h

Comments

AngeloGioacchino Del Regno July 3, 2023, 11:02 a.m. UTC | #1
Il 30/06/23 12:01, Julien Stephan ha scritto:
> From: Louis Kuo <louis.kuo@mediatek.com>
> 
> This will add the mediatek ISP3.0 seninf (sensor interface) driver found
> on several Mediatek SoCs such as the mt8365.
> 
> Then seninf module has 4 physical CSI-2 inputs. Depending on the soc they
> may not be all connected.
> 
> Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
>   MAINTAINERS                                   |    1 +
>   drivers/media/platform/mediatek/Kconfig       |    1 +
>   drivers/media/platform/mediatek/Makefile      |    1 +
>   drivers/media/platform/mediatek/isp/Kconfig   |    2 +
>   drivers/media/platform/mediatek/isp/Makefile  |    3 +
>   .../platform/mediatek/isp/isp_30/Kconfig      |   16 +
>   .../platform/mediatek/isp/isp_30/Makefile     |    3 +
>   .../mediatek/isp/isp_30/seninf/Makefile       |    5 +
>   .../mediatek/isp/isp_30/seninf/mtk_seninf.c   | 1561 +++++++++++++++++
>   .../isp/isp_30/seninf/mtk_seninf_reg.h        |   99 ++
>   10 files changed, 1692 insertions(+)
>   create mode 100644 drivers/media/platform/mediatek/isp/Kconfig
>   create mode 100644 drivers/media/platform/mediatek/isp/Makefile
>   create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Kconfig
>   create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Makefile
>   create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
>   create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
>   create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index af273a477139..9fda342ad331 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13356,6 +13356,7 @@ M:	Julien Stephan <jstephan@baylibre.com>
>   M:	Andy Hsieh <andy.hsieh@mediatek.com>
>   S:	Supported
>   F:	Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
> +F:	drivers/media/platform/mediatek/isp/isp_30/seninf/*
>   
>   MEDIATEK SMI DRIVER
>   M:	Yong Wu <yong.wu@mediatek.com>
> diff --git a/drivers/media/platform/mediatek/Kconfig b/drivers/media/platform/mediatek/Kconfig
> index 84104e2cd024..4e0a5a43f35e 100644
> --- a/drivers/media/platform/mediatek/Kconfig
> +++ b/drivers/media/platform/mediatek/Kconfig
> @@ -7,3 +7,4 @@ source "drivers/media/platform/mediatek/mdp/Kconfig"
>   source "drivers/media/platform/mediatek/vcodec/Kconfig"
>   source "drivers/media/platform/mediatek/vpu/Kconfig"
>   source "drivers/media/platform/mediatek/mdp3/Kconfig"
> +source "drivers/media/platform/mediatek/isp/Kconfig"
> diff --git a/drivers/media/platform/mediatek/Makefile b/drivers/media/platform/mediatek/Makefile
> index 38e6ba917fe5..695f05f525a6 100644
> --- a/drivers/media/platform/mediatek/Makefile
> +++ b/drivers/media/platform/mediatek/Makefile
> @@ -4,3 +4,4 @@ obj-y += mdp/
>   obj-y += vcodec/
>   obj-y += vpu/
>   obj-y += mdp3/
> +obj-y += isp/
> diff --git a/drivers/media/platform/mediatek/isp/Kconfig b/drivers/media/platform/mediatek/isp/Kconfig
> new file mode 100644
> index 000000000000..708b9a6660d2
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/Kconfig
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +source "drivers/media/platform/mediatek/isp/isp_30/Kconfig"
> diff --git a/drivers/media/platform/mediatek/isp/Makefile b/drivers/media/platform/mediatek/isp/Makefile
> new file mode 100644
> index 000000000000..a81ab33d0dd3
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +obj-y += isp_30/
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/Kconfig b/drivers/media/platform/mediatek/isp/isp_30/Kconfig
> new file mode 100644
> index 000000000000..831f9bee5fdd
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/Kconfig
> @@ -0,0 +1,16 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +config MTK_SENINF

MTK_SENINF_V30 or MTK_ISP30_SENINF instead?

> +	tristate "MediaTek ISP3.0 SENINF driver"
> +	depends on VIDEO_V4L2_SUBDEV_API
> +	depends on MEDIA_CAMERA_SUPPORT
> +	depends on ARCH_MEDIATEK || COMPILE_TEST
> +	depends on OF
> +	select V4L2_FWNODE
> +	default n
> +	help
> +	  This driver provides a MIPI CSI-2 receiver interface to connect
> +	  an external camera module with MediaTek ISP3.0. It is able to handle
> +	  multiple cameras at the same time.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called mtk-seninf.

..snip..

> diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
> new file mode 100644
> index 000000000000..93a13a87d967
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c

s/isp_30/isp30/g and s/mtk_seninf.c/mtk-seninf.c/g


...but then, I'm not sure that having a `isp30` folder inside of `isp` would be
actually beneficial for the driver structure. You're the judge.

> @@ -0,0 +1,1561 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022 MediaTek Inc.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of_graph.h>
> +#include <linux/of_platform.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/videodev2.h>
> +#include <media/media-device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-common.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-dev.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mc.h>
> +#include <media/v4l2-subdev.h>
> +
> +#include "mtk_seninf_reg.h"

If seninf for ISP3 is entirely different from ISP2 and ISP1 seninf, I'd rename
that header to "mtk_isp3_seninf_reg.h" instead.

> +
> +#define SENINF_TIMESTAMP_STEP		0x67
> +#define SENINF_SETTLE_DELAY		0x15
> +#define SENINF_HS_TRAIL_PARAMETER	0x8
> +
> +#define SENINF_MAX_NUM_INPUTS		4
> +#define SENINF_MAX_NUM_OUTPUTS		6
> +#define SENINF_MAX_NUM_MUXES		6
> +#define SENINF_MAX_NUM_PADS		(SENINF_MAX_NUM_INPUTS + \
> +					 SENINF_MAX_NUM_OUTPUTS)
> +
> +#define SENINF_DEFAULT_BUS_FMT		MEDIA_BUS_FMT_SGRBG10_1X10
> +#define SENINF_DEFAULT_WIDTH		1920
> +#define SENINF_DEFAULT_HEIGHT		1080
> +
> +#define SENINF_PAD_10BIT		0
> +
> +#define SENINF_TEST_MODEL		0
> +#define SENINF_NORMAL_MODEL		1
> +#define SENINF_ALL_ERR_IRQ_EN		0x7f
> +#define SENINF_IRQ_CLR_SEL		0x80000000
> +
> +#define SENINF_MIPI_SENSOR		0x8
> +
> +enum PIXEL_MODE {

Lowercase please.

> +	ONE_PIXEL_MODE  = 0x0,
> +	TWO_PIXEL_MODE  = 0x1,
> +	FOUR_PIXEL_MODE = 0x2,
> +};
> +
> +/* Port number in the device tree. */
> +enum mtk_seninf_port {
> +	CSI_PORT_0 = 0,	/* 4D1C or 2D1C */
> +	CSI_PORT_1,	/* 4D1C */
> +	CSI_PORT_2,	/* 4D1C */
> +	CSI_PORT_0B,	/* 2D1C */
> +};
> +
> +enum mtk_seninf_id {
> +	SENINF_1 = 0,
> +	SENINF_2 = 1,
> +	SENINF_3 = 2,
> +	SENINF_5 = 4,

Why is there no SENINF_4?
That deserves a comment in the code.

> +};
> +
> +static const u32 port_to_seninf_id[] = {
> +	[CSI_PORT_0] = SENINF_1,
> +	[CSI_PORT_1] = SENINF_3,
> +	[CSI_PORT_2] = SENINF_5,
> +	[CSI_PORT_0B] = SENINF_2,

Is the port-to-seninf path really static? Is there any way we can for example
configure CSI_PORT_0 to use SENINF_3 instead?

> +};
> +
> +enum mtk_seninf_phy_mode {
> +	SENINF_PHY_MODE_NONE,
> +	SENINF_PHY_MODE_4D1C,
> +	SENINF_PHY_MODE_2D1C,
> +};
> +
> +enum mtk_seninf_format_flag {
> +	MTK_SENINF_FORMAT_BAYER = BIT(0),
> +	MTK_SENINF_FORMAT_DPCM = BIT(1),
> +	MTK_SENINF_FORMAT_JPEG = BIT(2),
> +	MTK_SENINF_FORMAT_INPUT_ONLY = BIT(3),
> +};
> +
> +/**
> + * struct mtk_seninf_conf - Model-specific SENINF parameters
> + * @model: Model description
> + * @nb_inputs: Number of SENINF inputs
> + * @nb_muxes: Number of SENINF MUX (FIFO) instances
> + * @nb_outputs: Number of outputs (to CAM and CAMSV instances)
> + */
> +struct mtk_seninf_conf {
> +	const char *model;
> +	u8 nb_inputs;
> +	u8 nb_muxes;
> +	u8 nb_outputs;
> +};
> +

...snip...


> +
> +static const struct mtk_seninf_format_info mtk_seninf_formats[] = {
> +	{
> +		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
> +		.flags = MTK_SENINF_FORMAT_BAYER,

Each entry fits in one line.

	{ .code = MEDIA_BUS_FMT_SBGGR8_1X8, .flags = MTK_SENINF_FORMAT_BAYER },

> +	}, {
> +		.code = MEDIA_BUS_FMT_SGBRG8_1X8,
> +		.flags = MTK_SENINF_FORMAT_BAYER,

..snip..

> +
> +static const struct mtk_seninf_format_info *mtk_seninf_format_info(u32 code)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(mtk_seninf_formats); ++i) {
> +		if (mtk_seninf_formats[i].code == code)
> +			return &mtk_seninf_formats[i];
> +	}
> +
> +	return NULL;
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * I/O Accessors
> + */
> +static u32 mtk_seninf_read(struct mtk_seninf *priv, u32 reg)
> +{
> +	return readl(priv->base + reg);

I don't think that we need this kind of accessor. It's one line, performing either
just a readl or just a writel, so you can simply use readl/writel directly.

> +}
> +
> +static void mtk_seninf_write(struct mtk_seninf *priv, u32 reg, u32 value)
> +{
> +	writel(value, priv->base + reg);
> +}
> +
> +static void __mtk_seninf_update(struct mtk_seninf *priv, u32 reg,
> +				u32 mask, u32 value)
> +{
> +	u32 val = mtk_seninf_read(priv, reg);
> +
> +	mtk_seninf_write(priv, reg, (val & ~mask) | (value & mask));
> +}
> +
> +#define mtk_seninf_update(priv, reg, field, val)			\
> +	__mtk_seninf_update(priv, reg, reg##_##field,		\
> +			    FIELD_PREP(reg##_##field, val))
> +
> +static u32 mtk_seninf_input_read(struct mtk_seninf_input *input, u32 reg)
> +{
> +	return readl(input->base + reg);
> +}
> +
> +static void mtk_seninf_input_write(struct mtk_seninf_input *input, u32 reg,
> +				   u32 value)
> +{

same here.

> +	writel(value, input->base + reg);
> +}
> +
> +static void __mtk_seninf_input_update(struct mtk_seninf_input *input, u32 reg,
> +				      u32 mask, u32 value)
> +{
> +	u32 val = mtk_seninf_input_read(input, reg);
> +
> +	mtk_seninf_input_write(input, reg, (val & ~mask) | (value & mask));
> +}
> +
> +#define mtk_seninf_input_update(input, reg, field, val)			\
> +	__mtk_seninf_input_update(input, reg, reg##_##field,	\
> +				  FIELD_PREP(reg##_##field, val))
> +
> +static u32 mtk_seninf_mux_read(struct mtk_seninf_mux *mux, u32 reg)
> +{
> +	return readl(mux->base + reg);

...and here

> +}
> +
> +static void mtk_seninf_mux_write(struct mtk_seninf_mux *mux, u32 reg,
> +				 u32 value)
> +{
> +	writel(value, mux->base + reg);
> +}
> +
> +static void __mtk_seninf_mux_update(struct mtk_seninf_mux *mux, u32 reg,
> +				    u32 mask, u32 value)
> +{
> +	u32 val = mtk_seninf_mux_read(mux, reg);
> +
> +	mtk_seninf_mux_write(mux, reg, (val & ~mask) | (value & mask));
> +}
> +
> +#define mtk_seninf_mux_update(mux, reg, field, val)			\
> +	__mtk_seninf_mux_update(mux, reg, reg##_##field,	\
> +				FIELD_PREP(reg##_##field, val))
> +

..snip..


> +static void mtk_seninf_input_setup_csi2_rx(struct mtk_seninf_input *input)
> +{
> +	unsigned int lanes[4] = { };

I don't like that `4` magic number.

#define MTK_CSI_MAX_LANES 4
or
#define MTK_CSIHW_MAX_LANES 4

> +	unsigned int i;
> +
> +	/*
> +	 * Configure data lane muxing. In 2D1C mode, lanes 0 to 2 correspond to
> +	 * CSIx[AB]_L{0,1,2}, and in 4D1C lanes 0 to 5 correspond to
> +	 * CSIxA_L{0,1,2}, CSIxB_L{0,1,2}.
> +	 *
> +	 * The clock lane must be skipped when calculating the index of the
> +	 * physical data lane. For instance, in 4D1C mode, the sensor clock
> +	 * lane is typically connected to lane 2 (CSIxA_L2), and the sensor
> +	 * data lanes 0-3 to lanes 1 (CSIxA_L1), 3 (CSIxB_L0), 0 (CSIxA_L0) and
> +	 * 4 (CSIxB_L1). The when skipping the clock lane, the data lane
> +	 * indices become 1, 2, 0 and 3.
> +	 */
> +	for (i = 0; i < input->bus.num_data_lanes; ++i) {
> +		lanes[i] = input->bus.data_lanes[i];
> +		if (lanes[i] > input->bus.clock_lane)
> +			lanes[i]--;
> +	}
> +
> +	mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0,
> +				CSI0_BIST_LN0_MUX, lanes[0]);
> +	mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0,
> +				CSI0_BIST_LN1_MUX, lanes[1]);

89 columns is fine, so all of those do fit in one line.

> +	mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0,
> +				CSI0_BIST_LN2_MUX, lanes[2]);
> +	mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0,
> +				CSI0_BIST_LN3_MUX, lanes[3]);
> +}
> +
> +static void mtk_seninf_input_setup_csi2(struct mtk_seninf_input *input,
> +					struct v4l2_subdev_state *state)
> +{
> +	const struct mtk_seninf_format_info *fmtinfo;
> +	const struct v4l2_mbus_framefmt *format;
> +	unsigned int dpcm;
> +	unsigned int data_lane_num = input->bus.num_data_lanes;

`unsigned int num_data_lanes` would be more consistent.

> +	unsigned int data_header_order = 1;

Is this a constant?! If so, why is it not a definition? Also, what does `1` mean?

> +	unsigned int val = 0;
> +
> +	format = v4l2_subdev_state_get_stream_format(state, input->pad, 0);
> +	fmtinfo = mtk_seninf_format_info(format->code);
> +
> +	/* Configure timestamp */
> +	mtk_seninf_input_write(input, SENINF_TG1_TM_STP, SENINF_TIMESTAMP_STEP);
> +
> +	/* HQ */
> +	mtk_seninf_input_write(input, SENINF_TG1_PH_CNT, 0x0);
> +	mtk_seninf_input_write(input, SENINF_TG1_SEN_CK, 0x10001);
> +
> +	/* First Enable Sensor interface and select pad (0x1a04_0200) */
> +	mtk_seninf_input_update(input, SENINF_CTRL, SENINF_EN, 1);
> +	mtk_seninf_input_update(input, SENINF_CTRL, PAD2CAM_DATA_SEL, SENINF_PAD_10BIT);
> +	mtk_seninf_input_update(input, SENINF_CTRL, SENINF_SRC_SEL, 0);
> +	mtk_seninf_input_update(input, SENINF_CTRL_EXT, SENINF_CSI2_IP_EN, 1);
> +	mtk_seninf_input_update(input, SENINF_CTRL_EXT, SENINF_NCSI2_IP_EN, 0);
> +
> +	/* DPCM Enable */
> +	dpcm = fmtinfo->flags & MTK_SENINF_FORMAT_DPCM ? 0x2a : 0;

What does 0x2a mean?

> +	val = 1 << ((dpcm == 0x2a) ? 15 : ((dpcm & 0xF) + 7));

This is BIT(something);

> +	mtk_seninf_input_write(input, SENINF_CSI2_DPCM, val);
> +
> +	/* Settle delay */
> +	mtk_seninf_input_update(input, SENINF_CSI2_LNRD_TIMING,
> +				DATA_SETTLE_PARAMETER, SENINF_SETTLE_DELAY);
> +
> +	/* HQ */
> +	mtk_seninf_input_write(input, SENINF_CSI2_LNRC_FSM, 0x10);
> +
> +	/* CSI2 control */
> +	val = mtk_seninf_input_read(input, SENINF_CSI2_CTL)
> +	    | (data_header_order << 16) | 0x10 | ((1 << data_lane_num) - 1);

What is 0x10?
Also, (BIT(data_lane_num) - 1).

> +	mtk_seninf_input_write(input, SENINF_CSI2_CTL, val);
> +
> +	mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL,
> +				BYPASS_LANE_RESYNC, 0);
> +	mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL, CDPHY_SEL, 0);
> +	mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL,
> +				CPHY_LANE_RESYNC_CNT, 3);
> +	mtk_seninf_input_update(input, SENINF_CSI2_MODE, CSR_CSI2_MODE, 0);
> +	mtk_seninf_input_update(input, SENINF_CSI2_MODE, CSR_CSI2_HEADER_LEN, 0);
> +	mtk_seninf_input_update(input, SENINF_CSI2_DPHY_SYNC, SYNC_SEQ_MASK_0, 0xff00);
> +	mtk_seninf_input_update(input, SENINF_CSI2_DPHY_SYNC, SYNC_SEQ_PAT_0, 0x001d);
> +
> +	mtk_seninf_input_update(input, SENINF_CSI2_CTL, CLOCK_HS_OPTION, 0);
> +	mtk_seninf_input_update(input, SENINF_CSI2_CTL, HSRX_DET_EN, 0);
> +	mtk_seninf_input_update(input, SENINF_CSI2_CTL, HS_TRAIL_EN, 1);
> +	mtk_seninf_input_update(input, SENINF_CSI2_HS_TRAIL, HS_TRAIL_PARAMETER,
> +				SENINF_HS_TRAIL_PARAMETER);
> +
> +	/* Set debug port to output packet number */
> +	mtk_seninf_input_update(input, SENINF_CSI2_DGB_SEL, DEBUG_EN, 1);
> +	mtk_seninf_input_update(input, SENINF_CSI2_DGB_SEL, DEBUG_SEL, 0x1a);
> +
> +	/* HQ */
> +	mtk_seninf_input_write(input, SENINF_CSI2_SPARE0, 0xfffffffe);
> +
> +	/* Enable CSI2 IRQ mask */
> +	/* Turn on all interrupt */
> +	mtk_seninf_input_write(input, SENINF_CSI2_INT_EN, 0xffffffff);
> +	/* Write clear CSI2 IRQ */
> +	mtk_seninf_input_write(input, SENINF_CSI2_INT_STATUS, 0xffffffff);
> +	/* Enable CSI2 Extend IRQ mask */
> +	/* Turn on all interrupt */
> +	mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 1);
> +	udelay(1);
> +	mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 0);

Is there any way to check if the CSI port did reset, or is it *guaranteed* to get
out of reset in a microsecond after deasserting SW_RST?

> +}
> +
> +static void mtk_seninf_mux_setup(struct mtk_seninf_mux *mux,
> +				 struct mtk_seninf_input *input,
> +				 struct v4l2_subdev_state *state)
> +{
> +	const struct mtk_seninf_format_info *fmtinfo;
> +	const struct v4l2_mbus_framefmt *format;
> +	unsigned int pix_sel_ext;
> +	unsigned int pix_sel;
> +	unsigned int hs_pol = 0;
> +	unsigned int vs_pol = 0;
> +	unsigned int pixel_mode = TWO_PIXEL_MODE;
> +	unsigned int val;
> +
> +	format = v4l2_subdev_state_get_stream_format(state, input->pad, 0);
> +	fmtinfo = mtk_seninf_format_info(format->code);
> +
> +	/* Enable mux */
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_MUX_EN, 1);
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_SRC_SEL,
> +			      SENINF_MIPI_SENSOR);

Fits in one line.

> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
> +			      SENINF_SRC_SEL_EXT, SENINF_NORMAL_MODEL);

This one too, it's 98 cols, still acceptable.

> +
> +	switch (pixel_mode) {

You're forcing TWO_PIXEL_MODE but then you have a switch here: I get the point, as
in I get that you expect this to be extended to have that read from somewhere, but
only then will this switch make sense.

So, you could either remove this switch or actually introduce some logic that will
make `pixel_mode` variable; I'd be happy if you go for the second option.

> +	case 1: /* 2 Pixel */

Besides, `case 1` is from enum pixel_mode, so please use the definitions instead of
magic numbers.

> +		pix_sel_ext = 0;
> +		pix_sel = 1;
> +		break;
> +	case 2: /* 4 Pixel */
> +		pix_sel_ext = 1;
> +		pix_sel = 0;
> +		break;
> +	default: /* 1 Pixel */
> +		pix_sel_ext = 0;
> +		pix_sel = 0;
> +		break;
> +	}
> +
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
> +			      SENINF_PIX_SEL_EXT, pix_sel_ext);

one line.

> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_PIX_SEL, pix_sel);
> +
> +	if (!(fmtinfo->flags & MTK_SENINF_FORMAT_JPEG)) {

Logically, inverting this branch to

	if (fmtinfo->flags & MTK_SENINF_FORMAT_JPEG) {
		...
	} else {
		...
	}

would be better imo.

> +		mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 2);
> +		mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN, 0x1b);
> +		mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN, 0x1f);

Also, can you please add definitions for those FIFO_xxxx_EN values?

> +	} else {
> +		mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 0);
> +		mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN, 0x18);
> +		mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN, 0x1e);
> +	}
> +
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_POL, hs_pol);
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_VSYNC_POL, vs_pol);
> +
> +	val = mtk_seninf_mux_read(mux, SENINF_MUX_CTRL);

rst_mask = SENINF_MUX_CTRL_SENINF_IRQ_SW_RST | SENINF_MUX_CTRL_SENINF_MUX_SW_RST;

writel(mux->base + SENINF_MUX_CTRL, val | rst_mask);
writel(mux->base + SENINFMUX_CTRL, val & ~rst_mask);

that's better, right? :-)

> +	mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val |
> +			     SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
> +			     SENINF_MUX_CTRL_SENINF_MUX_SW_RST);
> +	mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val &
> +			     ~(SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
> +			       SENINF_MUX_CTRL_SENINF_MUX_SW_RST));
> +
> +	/* HQ */
> +	mtk_seninf_mux_write(mux, SENINF_MUX_SPARE, 0xc2000);

Again, what does 0xc2000 mean?!

> +}
> +
> +static void mtk_seninf_top_mux_setup(struct mtk_seninf *priv,
> +				     enum mtk_seninf_id seninf_id,
> +				     struct mtk_seninf_mux *mux)
> +{
> +	unsigned int val;
> +
> +	/*
> +	 * Use the top mux (from SENINF input to MUX) to configure routing, and
> +	 * hardcode a 1:1 mapping from the MUX instances to the SENINF outputs.
> +	 */
> +	val = mtk_seninf_read(priv, SENINF_TOP_MUX_CTRL)
> +		& ~(0xf << (mux->mux_id * 4));
> +	val |= (seninf_id & 0xf) << (mux->mux_id * 4);
> +	mtk_seninf_write(priv, SENINF_TOP_MUX_CTRL, val);
> +
> +	mtk_seninf_write(priv, SENINF_TOP_CAM_MUX_CTRL, 0x76541010);
> +}
> +
> +static void seninf_enable_test_pattern(struct mtk_seninf *priv,
> +				       struct v4l2_subdev_state *state)
> +{
> +	struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_0];
> +	struct mtk_seninf_mux *mux = &priv->muxes[0];
> +	const struct mtk_seninf_format_info *fmtinfo;
> +	const struct v4l2_mbus_framefmt *format;
> +	unsigned int val;
> +	unsigned int pixel_mode = TWO_PIXEL_MODE;
> +	unsigned int pix_sel_ext;
> +	unsigned int pix_sel;
> +	unsigned int hs_pol = 0;
> +	unsigned int vs_pol = 0;
> +	unsigned int seninf = 0;
> +	unsigned int mux_id = mux->mux_id;
> +
> +	format = v4l2_subdev_state_get_stream_format(state, priv->conf->nb_inputs, 0);
> +	fmtinfo = mtk_seninf_format_info(format->code);
> +
> +	mtk_seninf_update(priv, SENINF_TOP_CTRL, MUX_LP_MODE, 0);
> +
> +	mtk_seninf_update(priv, SENINF_TOP_CTRL, SENINF_PCLK_EN, 1);
> +	mtk_seninf_update(priv, SENINF_TOP_CTRL, SENINF2_PCLK_EN, 1);
> +
> +	mtk_seninf_input_update(input, SENINF_CTRL, SENINF_EN, 1);
> +	mtk_seninf_input_update(input, SENINF_CTRL, SENINF_SRC_SEL, 1);
> +	mtk_seninf_input_update(input, SENINF_CTRL_EXT,
> +				SENINF_TESTMDL_IP_EN, 1);
> +
> +	mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_EN, 1);
> +	mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_PAT, 0xc);
> +	mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_VSYNC, 4);
> +	mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_DUMMYPXL, 0x28);
> +
> +	if (fmtinfo->flags & MTK_SENINF_FORMAT_BAYER)
> +		mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_FMT, 0x0);
> +	else
> +		mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_FMT, 0x1);
> +

#define SENINF_TG1_TM_HEIGHT	GENMASK(31, 16)
#define SENINF_TG1_TM_WIDTH	GENMASK(15, 0)

size = FIELD_PREP(SENINF_TG1_TM_HEIGHT, (format->height + 8));

switch ... {
	case something:
		size |= FIELD_PREP(SENINF_TG1_TM_WIDTH, format->width * 2);
		break;
	case default:
		size |= FIELD_PREP(SENINF_TG1_TM_WIDTH, format->width);
		break;
}

writel(the_base + the_reg, size);

:-) :-) :-) :-)

> +	switch (format->code) {
> +	case MEDIA_BUS_FMT_UYVY8_1X16:
> +	case MEDIA_BUS_FMT_VYUY8_1X16:
> +	case MEDIA_BUS_FMT_YUYV8_1X16:
> +	case MEDIA_BUS_FMT_YVYU8_1X16:
> +		mtk_seninf_input_write(input, SENINF_TG1_TM_SIZE,
> +				       (format->height + 8) << 16 |
> +				       format->width * 2);
> +		break;
> +	default:
> +		mtk_seninf_input_write(input, SENINF_TG1_TM_SIZE,
> +				       (format->height + 8) << 16 |
> +				       format->width);
> +		break;
> +	}
> +
> +	mtk_seninf_input_write(input, SENINF_TG1_TM_CLK, 0x8);

Magic numbers again...

> +	mtk_seninf_input_write(input, SENINF_TG1_TM_STP, 0x1);
> +
> +	/* Set top mux */
> +	val = (mtk_seninf_read(priv, SENINF_TOP_MUX_CTRL) & (~(0xf << (mux_id * 4)))) |
> +		((seninf & 0xf) << (mux_id * 4));
> +	mtk_seninf_write(priv, SENINF_TOP_MUX_CTRL, val);
> +
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_MUX_EN, 1);
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
> +			      SENINF_SRC_SEL_EXT, SENINF_TEST_MODEL);
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_SRC_SEL, 1);
> +
> +	switch (pixel_mode) {
> +	case 1:
> +		pix_sel_ext = 0;
> +		pix_sel = 1;
> +		break;
> +	case 2:
> +		pix_sel_ext = 1;
> +		pix_sel = 0;
> +		break;
> +	default:
> +		pix_sel_ext = 0;
> +		pix_sel = 0;
> +		break;
> +	}
> +
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
> +			      SENINF_PIX_SEL_EXT, pix_sel_ext);
> +
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_PIX_SEL, pix_sel);
> +
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN, 0x1f);
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN, 0x1b);
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 2);
> +
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_POL, hs_pol);
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_VSYNC_POL, vs_pol);
> +	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_MASK, 1);
> +
> +	mtk_seninf_mux_write(mux, SENINF_MUX_INTEN,
> +			     SENINF_IRQ_CLR_SEL | SENINF_ALL_ERR_IRQ_EN);
> +
> +	mtk_seninf_mux_write(mux, SENINF_MUX_CTRL,
> +			     mtk_seninf_mux_read(mux, SENINF_MUX_CTRL) |
> +			     SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
> +			     SENINF_MUX_CTRL_SENINF_MUX_SW_RST);
> +	udelay(1);
> +	mtk_seninf_mux_write(mux, SENINF_MUX_CTRL,
> +			     mtk_seninf_mux_read(mux, SENINF_MUX_CTRL) &
> +			     ~(SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
> +			       SENINF_MUX_CTRL_SENINF_MUX_SW_RST));
> +
> +	//check this

Please, check this :-) :-)

> +	mtk_seninf_write(priv, SENINF_TOP_CAM_MUX_CTRL, 0x76540010);
> +
> +	dev_dbg(priv->dev, "%s: OK\n", __func__);
> +}
> +
> +static void mtk_seninf_start(struct mtk_seninf *priv,
> +			     struct v4l2_subdev_state *state,
> +			     struct mtk_seninf_input *input,
> +			     struct mtk_seninf_mux *mux)
> +{
> +	phy_power_on(input->phy);
> +
> +	mtk_seninf_input_setup_csi2_rx(input);
> +	mtk_seninf_input_setup_csi2(input, state);
> +
> +	mtk_seninf_mux_setup(mux, input, state);
> +	mtk_seninf_top_mux_setup(priv, input->seninf_id, mux);
> +}
> +
> +static void mtk_seninf_stop(struct mtk_seninf *priv,
> +			    struct mtk_seninf_input *input)
> +{
> +	unsigned int val;
> +
> +	/* Disable CSI2(2.5G) first */
> +	val = mtk_seninf_input_read(input, SENINF_CSI2_CTL);
> +	val &= ~(SENINF_CSI2_CTL_CLOCK_LANE_EN |
> +		 SENINF_CSI2_CTL_DATA_LANE3_EN |
> +		 SENINF_CSI2_CTL_DATA_LANE2_EN |
> +		 SENINF_CSI2_CTL_DATA_LANE1_EN |
> +		 SENINF_CSI2_CTL_DATA_LANE0_EN);
> +	mtk_seninf_input_write(input, SENINF_CSI2_CTL, val);
> +
> +	if (!priv->is_testmode)
> +		phy_power_off(input->phy);
> +}
> +

..snip..


> +/* -----------------------------------------------------------------------------
> + * V4L2 Subdev Operations
> + */
> +static int seninf_s_stream(struct v4l2_subdev *sd, unsigned int source_pad,
> +			   int on)
> +{
> +	struct mtk_seninf *priv = sd_to_mtk_seninf(sd);
> +	struct v4l2_subdev_state *state;
> +	struct mtk_seninf_input *input;
> +	struct mtk_seninf_mux *mux;
> +	struct v4l2_subdev *source;
> +	u32 sink_pad;
> +	int ret;
> +
> +	/* Stream control can only operate on source pads. */
> +	if (source_pad < priv->conf->nb_inputs ||
> +	    source_pad >= priv->conf->nb_inputs + priv->conf->nb_outputs)
> +		return -EINVAL;
> +
> +	/*
> +	 * Locate the SENINF input and MUX for the source pad.
> +	 *
> +	 * Hardcode a 1:1 mapping of MUX instances to SENINF
> +	 * outputs to match the TOP_CAM_MUX configuration in
> +	 * mtk_seninf_top_mux_setup().
> +	 */
> +	state = v4l2_subdev_lock_and_get_active_state(&priv->subdev);
> +	if (!state)
> +		return -EPIPE;
> +
> +	ret = v4l2_subdev_routing_find_opposite_end(&state->routing, source_pad, 0, &sink_pad,
> +						    NULL);
> +	if (ret) {
> +		dev_dbg(priv->dev, "No sink pad routed to source pad %u\n",
> +			source_pad);

one line please...

> +		goto unlock;
> +	}
> +

..snip..

> +
> +static int seninf_set_fmt(struct v4l2_subdev *sd,
> +			  struct v4l2_subdev_state *state,
> +			  struct v4l2_subdev_format *fmt)
> +{
> +	struct mtk_seninf *priv = sd_to_mtk_seninf(sd);
> +	const struct mtk_seninf_format_info *fmtinfo;
> +	struct v4l2_mbus_framefmt *format;
> +
> +	/*
> +	 * TODO (?): We should disallow setting formats on the source pad
> +	 * completely, as the SENINF can't perform any processing. This would
> +	 * however break usage of the test pattern generator, as there would be
> +	 * no way to configure formats at all when no active input is selected.
> +	 */

It's either a TODO or not... but whatever, I imagine that the difficulty here is
that `priv->is_testmode` may become `true` after .set_fmt(), right?

> +
> +	/*
> +	 * Default to the first format if the requested media bus code isn't
> +	 * supported.
> +	 */
> +	fmtinfo = mtk_seninf_format_info(fmt->format.code);
> +	if (!fmtinfo) {
> +		fmtinfo = &mtk_seninf_formats[0];
> +		fmt->format.code = fmtinfo->code;
> +	}
> +
> +	/* Interlaced formats are not supported yet. */
> +	fmt->format.field = V4L2_FIELD_NONE;
> +
> +	/* Store the format. */
> +

Drop extra blank line please.

> +	format = v4l2_subdev_state_get_stream_format(state, fmt->pad, fmt->stream);
> +	if (!format)
> +		return -EINVAL;
> +
> +	*format = fmt->format;
> +
> +	if (mtk_seninf_pad_is_source(priv, fmt->pad))
> +		return 0;
> +
> +	/* Propagate the format to the corresponding source pad. */
> +	format = v4l2_subdev_state_get_opposite_stream_format(state, fmt->pad,
> +							      fmt->stream);
> +	if (!format)
> +		return -EINVAL;
> +
> +	*format = fmt->format;
> +
> +	return 0;
> +}
> +

..snip..

> +
> +static int mtk_seninf_fwnode_parse(struct device *dev,
> +				   unsigned int id)
> +
> +{
> +	static const char * const phy_names[] = { "csi0", "csi1", "csi2", "csi0b"};
> +

Please remove the extra blank line.

> +	struct mtk_seninf *priv = dev_get_drvdata(dev);
> +	struct mtk_seninf_async_subdev *s_asd;
> +	unsigned int port;

Move this before `ret`: makes it a little more readable.

> +	struct mtk_seninf_input *input;
> +	struct fwnode_handle *ep, *fwnode;
> +	struct v4l2_fwnode_endpoint vep = {
> +		.bus_type = V4L2_MBUS_CSI2_DPHY,
> +	};
> +	struct v4l2_async_subdev *asd;
> +	int ret;

static const char * const phy_names[] = { "csi0", "csi1", "csi2", "csi0b" };
struct mtk_seninf *priv = dev_get_drvdata(dev);
struct mtk_seninf_async_subdev *s_asd;
struct fwnode_handle *ep, *fwnode;
struct mtk_seninf_input *input;
struct v4l2_async_subdev *asd;
struct v4l2_fwnode_endpoint vep = {
	.bus_type = V4L2_MBUS_CSI2_DPHY,
};
unsigned int port;
int ret;


> +
> +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), id, 0, 0);
> +	if (!ep)
> +		return 0;

Are you sure that this should really be `return 0`?

> +
> +	fwnode = fwnode_graph_get_remote_endpoint(ep);
> +	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> +	if (ret) {
> +		dev_err(dev, "Failed to parse %pOF\n", to_of_node(fwnode));
> +		ret = -EINVAL;
> +		goto out;
> +	}
> +
> +	asd = v4l2_async_nf_add_fwnode(&priv->notifier,
> +				       fwnode, struct v4l2_async_subdev);
> +	if (IS_ERR(asd)) {
> +		ret = PTR_ERR(asd);
> +		goto out;
> +	}
> +	s_asd = container_of(asd, struct mtk_seninf_async_subdev, asd);
> +
> +	port = vep.base.port;
> +	s_asd->port = port;
> +
> +	if (mtk_seninf_pad_is_source(priv, port))
> +		return 0;

hmmm... no fwnode_handle_put()!?

> +
> +	if (vep.bus_type != V4L2_MBUS_CSI2_DPHY) {
> +		dev_err(dev, "Only CSI2 bus type is currently supported\n");
> +		ret = -EINVAL;
> +		goto out;
> +	}
> +
> +	input = &priv->inputs[port];
> +
> +	input->pad = port;
> +	input->seninf_id = port_to_seninf_id[port];
> +	input->base = priv->base + 0x1000 * input->seninf_id;
> +	input->seninf = priv;
> +
> +	input->bus = vep.bus.mipi_csi2;
> +
> +	input->phy = devm_phy_get(dev, phy_names[port]);
> +	if (IS_ERR(input->phy)) {
> +		dev_err(dev, "failed to get phy:%ld\n", PTR_ERR(input->phy));
> +		ret = PTR_ERR(input->phy);
> +		goto out;
> +	}
> +	input->phy_mode = SENINF_PHY_MODE_4D1C;
> +
> +	s_asd->input = input;
> +
> +	ret = 0;

Honestly, I don't like that `ret = 0`, but I admit that this is the cleanest option
that we can have here, so it's fine.

> +out:
> +	fwnode_handle_put(ep);
> +	fwnode_handle_put(fwnode);
> +	return ret;
> +}
> +
> +static int mtk_seninf_notifier_bound(struct v4l2_async_notifier *notifier,
> +				     struct v4l2_subdev *sd,
> +				     struct v4l2_async_subdev *asd)
> +{
> +	struct mtk_seninf *priv = container_of(notifier, struct mtk_seninf, notifier);
> +	struct mtk_seninf_async_subdev *s_asd =
> +		container_of(asd, struct mtk_seninf_async_subdev, asd);
> +	struct device_link *link;
> +	int ret;
> +
> +	dev_dbg(priv->dev, "%s bound to SENINF port %u\n", sd->entity.name,
> +		s_asd->port);

one line.

> +
> +	if (mtk_seninf_pad_is_sink(priv, s_asd->port)) {
> +		struct mtk_seninf_input *input = s_asd->input;
> +
> +		input->source_sd = sd;
> +
> +		link = device_link_add(priv->dev, sd->dev,
> +				       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> +		if (!link) {
> +			dev_err(priv->dev,
> +				"Failed to create device link from source %s\n", sd->name);
> +			return -EINVAL;
> +		}
> +
> +		ret = v4l2_create_fwnode_links_to_pad(sd, &priv->pads[input->pad],
> +						      MEDIA_LNK_FL_IMMUTABLE |
> +						      MEDIA_LNK_FL_ENABLED);
> +	} else {
> +		link = device_link_add(sd->dev, priv->dev,
> +				       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
> +		if (!link) {
> +			dev_err(priv->dev,
> +				"Failed to create device link to output %s\n", sd->name);
> +			return -EINVAL;
> +		}
> +
> +		ret = v4l2_create_fwnode_links_to_pad(&priv->subdev,
> +						      &sd->entity.pads[0],
> +						      MEDIA_LNK_FL_IMMUTABLE |
> +						      MEDIA_LNK_FL_ENABLED);
> +	}
> +	if (ret)
> +		dev_err(priv->dev, "Failed to create links between SENINF port %u and %s (%d)\n",
> +			s_asd->port, sd->entity.name, ret);

if (ret) {
	dev_err(...)
	return ret;
}

return 0;

> +
> +	return ret;
> +}
> +
> +static int mtk_seninf_notifier_complete(struct v4l2_async_notifier *notifier)
> +{
> +	struct mtk_seninf *priv = container_of(notifier, struct mtk_seninf, notifier);
> +	int ret;
> +
> +	ret = v4l2_device_register_subdev_nodes(&priv->v4l2_dev);
> +	if (ret)
> +		dev_err(priv->dev, "Failed to register subdev nodes: %d\n", ret);

if (ret) {
	dev_err....
	return ret;
}
return 0;

> +
> +	return ret;
> +}
> +
> +static const struct v4l2_async_notifier_operations mtk_seninf_async_ops = {
> +	.bound = mtk_seninf_notifier_bound,
> +	.complete = mtk_seninf_notifier_complete,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Probe & Remove
> + */

I don't think that we need such comments, btw.

> +
> +static int mtk_seninf_media_init(struct mtk_seninf *priv)
> +{
> +	struct media_pad *pads = priv->pads;
> +	const struct mtk_seninf_conf *conf = priv->conf;
> +	struct device *dev = priv->dev;
> +	struct media_device *media_dev = &priv->media_dev;
> +	u8 num_pads = conf->nb_outputs + conf->nb_inputs;

Some reordering would be good for readability here.

> +	unsigned int i;
> +	int ret;
> +
> +	media_dev->dev = dev;
> +	strscpy(media_dev->model, conf->model, sizeof(media_dev->model));
> +	snprintf(media_dev->bus_info, sizeof(media_dev->bus_info),
> +		 "platform:%s", dev_name(dev));
> +	media_dev->hw_revision = 0;
> +	media_device_init(media_dev);
> +
> +	ret = media_entity_pads_init(&priv->subdev.entity, num_pads, pads);
> +	if (ret)
> +		goto err_clean_media;
> +
> +	for (i = 0; i < conf->nb_inputs; i++)
> +		pads[i].flags = MEDIA_PAD_FL_SINK;
> +	for (i = conf->nb_inputs; i < num_pads; i++)
> +		pads[i].flags = MEDIA_PAD_FL_SOURCE;
> +
> +	return 0;
> +err_clean_media:
> +	media_device_cleanup(media_dev);
> +
> +	return ret;
> +}
> +
> +static int mtk_seninf_v4l2_async_register(struct mtk_seninf *priv)
> +{
> +	struct device *dev = priv->dev;
> +	const struct mtk_seninf_conf *conf = priv->conf;
> +	int ret;
> +	unsigned int i;

const struct mtk_seninf_conf *conf = priv->conf;
struct device *dev = priv->dev;
unsigned int i;
int ret;

> +
> +	v4l2_async_nf_init(&priv->notifier);
> +
> +	for (i = 0; i < conf->nb_inputs + conf->nb_outputs; ++i) {
> +		ret = mtk_seninf_fwnode_parse(dev, i);
> +
> +		if (ret) {
> +			dev_err(dev, "Failed to parse endpoint at port %d, err: %d\n", i, ret);
> +			goto err_clean_notififer;
> +		}
> +	}
> +
> +	priv->notifier.ops = &mtk_seninf_async_ops;
> +	ret = v4l2_async_nf_register(&priv->v4l2_dev, &priv->notifier);
> +	if (ret)
> +		dev_err(dev, "Failed to register async notifier: %d\n", ret);

So you don't care about this failure?! :-)

> +	return 0;
> +
> +err_clean_notififer:
> +	v4l2_async_nf_cleanup(&priv->notifier);
> +
> +	return ret;
> +}
> +
> +static int mtk_seninf_v4l2_register(struct mtk_seninf *priv)
> +{
> +	struct v4l2_subdev *sd = &priv->subdev;
> +	struct device *dev = priv->dev;
> +	int ret;
> +
> +	/* Initialize media device & pads. */
> +	ret = mtk_seninf_media_init(priv);
> +	if (ret)
> +		return ret;
> +
> +	/* Initialize & register v4l2 device. */
> +	priv->v4l2_dev.mdev = &priv->media_dev;
> +
> +	ret = v4l2_device_register(dev, &priv->v4l2_dev);
> +	if (ret) {
> +		dev_err(dev, "Failed to register V4L2 device: %d\n", ret);

You can still use dev_err_probe, even if you're not returning: this would make
sure that the log format is consistent for at least all probe functions :-)

> +		goto err_clean_media;
> +	}
> +
> +	/* Initialize & register subdev. */
> +	v4l2_subdev_init(sd, &seninf_subdev_ops);
> +	sd->dev = dev;
> +	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
> +	sd->entity.ops = &seninf_media_ops;
> +	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS
> +		  |  V4L2_SUBDEV_FL_STREAMS;
> +	strscpy(sd->name, dev_name(dev), V4L2_SUBDEV_NAME_SIZE);
> +	ret = seninf_initialize_controls(priv);
> +	if (ret) {
> +		dev_err(dev, "Failed to initialize controls: %d\n", ret);
> +		goto err_unreg_v4l2;
> +	}
> +	v4l2_set_subdevdata(sd, priv);
> +
> +	ret = v4l2_subdev_init_finalize(sd);
> +	if (ret)
> +		goto err_free_handler;
> +
> +	ret = v4l2_device_register_subdev(&priv->v4l2_dev, sd);
> +	if (ret) {
> +		dev_err(dev, "Failed to register subdev: %d\n", ret);
> +		goto err_cleanup_subdev;
> +	}
> +
> +	/* Set up async device */
> +	ret = mtk_seninf_v4l2_async_register(priv);
> +	if (ret) {
> +		dev_err(dev, "Failed to register v4l2 async notifier: %d\n", ret);
> +		goto err_unreg_subdev;
> +	}
> +
> +	/* Register media device */
> +	ret = media_device_register(&priv->media_dev);
> +	if (ret) {
> +		dev_err(dev, "failed to register media device: %d\n", ret);
> +		goto err_unreg_notifier;
> +	}
> +
> +	return 0;
> +
> +err_unreg_notifier:
> +	v4l2_async_nf_unregister(&priv->notifier);
> +err_unreg_subdev:
> +	v4l2_device_unregister_subdev(sd);
> +err_cleanup_subdev:
> +	v4l2_subdev_cleanup(sd);
> +err_free_handler:
> +	v4l2_ctrl_handler_free(&priv->ctrl_handler);
> +err_unreg_v4l2:
> +	v4l2_device_unregister(&priv->v4l2_dev);
> +err_clean_media:
> +	media_entity_cleanup(&sd->entity);
> +	media_device_cleanup(&priv->media_dev);
> +
> +	return ret;
> +}
> +
> +static int seninf_probe(struct platform_device *pdev)
> +{
> +	/* List of clocks required by seninf. */
> +	static const char * const clk_names[] = {
> +		"camsys", "top_mux"
> +	};

Fits in one line; drop extra blank line.

> +
> +	struct mtk_seninf *priv;
> +	struct device *dev = &pdev->dev;

reordering: dev before priv

> +	unsigned int i;
> +	int ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(struct mtk_seninf), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->conf = of_device_get_match_data(dev);
> +
> +	dev_set_drvdata(dev, priv);
> +	priv->dev = dev;
> +
> +	priv->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(priv->base))
> +		return PTR_ERR(priv->base);
> +
> +	priv->num_clks = ARRAY_SIZE(clk_names);
> +	priv->clks = devm_kcalloc(dev, priv->num_clks,
> +				  sizeof(*priv->clks), GFP_KERNEL);
> +	if (!priv->clks)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < priv->num_clks; ++i)
> +		priv->clks[i].id = clk_names[i];
> +
> +	ret = devm_clk_bulk_get(dev, priv->num_clks, priv->clks);
> +	if (ret) {
> +		dev_err(dev, "failed to get seninf clock:%d\n", ret);
> +		return ret;
> +	}
> +
> +	for (i = 0; i < priv->conf->nb_muxes; ++i) {
> +		struct mtk_seninf_mux *mux = &priv->muxes[i];
> +
> +		mux->pad = priv->conf->nb_inputs + i;
> +		mux->mux_id = i;
> +		mux->base = priv->base + 0x1000 * i;
> +		mux->seninf = priv;
> +	}
> +
> +	ret = mtk_seninf_v4l2_register(priv);

if (ret)
	return ret;

pm_runtime_enable(dev); (P.S.: Why not devm_pm_runtime_enable()?)

return 0;
}

> +	if (!ret)
> +		pm_runtime_enable(dev);
> +
> +	return ret;
> +}
> +
> +static int seninf_pm_suspend(struct device *dev)
> +{
> +	struct mtk_seninf *priv = dev_get_drvdata(dev);
> +
> +	dev_dbg(dev, "seninf runtime suspend\n");
> +	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +
> +	return 0;
> +}
> +
> +static int seninf_pm_resume(struct device *dev)
> +{
> +	struct mtk_seninf *priv = dev_get_drvdata(dev);
> +	int ret;
> +
> +	dev_dbg(dev, "seninf runtime resume\n");
> +	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
> +	if (ret) {
> +		dev_err(dev, "failed to enable clock:%d\n", ret);
> +		return ret;
> +	}
> +
> +	mtk_seninf_csi2_setup_phy(priv);
> +
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops runtime_pm_ops = {
> +	SET_RUNTIME_PM_OPS(seninf_pm_suspend, seninf_pm_resume, NULL)
> +	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> +				pm_runtime_force_resume)

Fits in one line.

> +};
> +
> +static int seninf_remove(struct platform_device *pdev)
> +{
> +	struct mtk_seninf *priv = dev_get_drvdata(&pdev->dev);
> +
> +	media_device_unregister(&priv->media_dev);
> +	media_device_cleanup(&priv->media_dev);
> +	v4l2_async_nf_unregister(&priv->notifier);
> +	v4l2_async_nf_cleanup(&priv->notifier);
> +	v4l2_device_unregister_subdev(&priv->subdev);
> +	v4l2_subdev_cleanup(&priv->subdev);
> +	v4l2_ctrl_handler_free(&priv->ctrl_handler);
> +	media_entity_cleanup(&priv->subdev.entity);
> +	v4l2_device_unregister(&priv->v4l2_dev);
> +
> +	pm_runtime_disable(priv->dev);
> +
> +	return 0;
> +}
> +
> +static const struct mtk_seninf_conf seninf_8365_conf = {
> +	.model = "mtk-camsys-3.0",
> +	.nb_inputs = 4,
> +	.nb_muxes = 6,
> +	.nb_outputs = 4,
> +};
> +
> +static const struct of_device_id mtk_seninf_of_match[] = {
> +	{
> +		.compatible = "mediatek,mt8365-seninf",
> +		.data = &seninf_8365_conf,

This fits in one line:

{ .compatible = "mediatek,mt8365-seninf", .data = &seninf_8365_conf }

> +	},
> +	{

Please always end of_device_id lists with

	{ /* sentinel */ }

> +	},
> +};
> +MODULE_DEVICE_TABLE(of, mtk_seninf_of_match);
> +
> +static struct platform_driver seninf_pdrv = {
> +	.driver	= {
> +		.name	= "mtk-seninf",

Either tabs or one space please.

> +		.pm  = &runtime_pm_ops,
> +		.of_match_table = mtk_seninf_of_match,
> +	},
> +	.probe	= seninf_probe,
> +	.remove	= seninf_remove,
> +};
> +
> +module_platform_driver(seninf_pdrv);
> +
> +MODULE_DESCRIPTION("MTK sensor interface driver");
> +MODULE_AUTHOR("Louis Kuo <louis.kuo@mediatek.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h
> new file mode 100644
> index 000000000000..b6af8567fa20
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h
> @@ -0,0 +1,99 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022 MediaTek Inc.
> + */
> +
> +#ifndef __SENINF_REG_H__
> +#define __SENINF_REG_H__
> +
> +#include <linux/bits.h>
> +
> +#define SENINF_TOP_CTRL							0x0000
> +#define SENINF_TOP_CTRL_MUX_LP_MODE					BIT(31)

..snip..

> +#define SENINF_MUX_CTRL_SENINF_MUX_EN					BIT(31)
> +#define SENINF_MUX_INTEN						0x0d04
> +#define SENINF_MUX_SPARE						0x0d2c
> +#define SENINF_MUX_CTRL_EXT						0x0d3c
> +#define SENINF_MUX_CTRL_EXT_SENINF_SRC_SEL_EXT				GENMASK(1, 0)
> +#define SENINF_MUX_CTRL_EXT_SENINF_PIX_SEL_EXT				BIT(4)

#endif /* __SENINF_REG_H__ */

> +#endif

Regards,
Angelo
Julien Stephan Aug. 4, 2023, 2:50 p.m. UTC | #2
On Mon, Jul 03, 2023 at 01:02:02PM +0200, AngeloGioacchino Del Regno wrote:
> Il 30/06/23 12:01, Julien Stephan ha scritto:
..snip..
> > +
> > +static const struct mtk_seninf_format_info mtk_seninf_formats[] = {
> > +	{
> > +		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
> > +		.flags = MTK_SENINF_FORMAT_BAYER,
>
> Each entry fits in one line.
>
> 	{ .code = MEDIA_BUS_FMT_SBGGR8_1X8, .flags = MTK_SENINF_FORMAT_BAYER },
>

Hi Angelo,

Actually not all entries fit in one line. The last 4 ones don't:

       { .code = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8, .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY },
which is 115 chars..

so what is the best? put all in one line except the last 4 one? or keep
them all as is?


> > +	}, {
..snip..
> > +	udelay(1);
> > +	mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 0);
>
> Is there any way to check if the CSI port did reset, or is it *guaranteed* to get
> out of reset in a microsecond after deasserting SW_RST?
>

I will double check this

> > +}
> > +
..snip..
> > +
> > +	val = mtk_seninf_mux_read(mux, SENINF_MUX_CTRL);
>
> rst_mask = SENINF_MUX_CTRL_SENINF_IRQ_SW_RST | SENINF_MUX_CTRL_SENINF_MUX_SW_RST;
>
> writel(mux->base + SENINF_MUX_CTRL, val | rst_mask);
> writel(mux->base + SENINFMUX_CTRL, val & ~rst_mask);
>
> that's better, right? :-)
>

right :)

Cheers
Julien

> > +	mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val |
> > +			     SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
> > +			     SENINF_MUX_CTRL_SENINF_MUX_SW_RST);
Laurent Pinchart Aug. 4, 2023, 3:05 p.m. UTC | #3
On Fri, Aug 04, 2023 at 04:50:05PM +0200, Julien Stephan wrote:
> On Mon, Jul 03, 2023 at 01:02:02PM +0200, AngeloGioacchino Del Regno wrote:
> > Il 30/06/23 12:01, Julien Stephan ha scritto:
> ..snip..
> > > +
> > > +static const struct mtk_seninf_format_info mtk_seninf_formats[] = {
> > > +	{
> > > +		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
> > > +		.flags = MTK_SENINF_FORMAT_BAYER,
> >
> > Each entry fits in one line.
> >
> > 	{ .code = MEDIA_BUS_FMT_SBGGR8_1X8, .flags = MTK_SENINF_FORMAT_BAYER },
> >
> 
> Hi Angelo,
> 
> Actually not all entries fit in one line. The last 4 ones don't:
> 
>        { .code = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8, .flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY },
> which is 115 chars..
> 
> so what is the best? put all in one line except the last 4 one? or keep
> them all as is?

I'd keep them all as is.

> > > +	}, {
> ..snip..
> > > +	udelay(1);
> > > +	mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 0);
> >
> > Is there any way to check if the CSI port did reset, or is it *guaranteed* to get
> > out of reset in a microsecond after deasserting SW_RST?
> 
> I will double check this
> 
> > > +}
> > > +
> ..snip..
> > > +
> > > +	val = mtk_seninf_mux_read(mux, SENINF_MUX_CTRL);
> >
> > rst_mask = SENINF_MUX_CTRL_SENINF_IRQ_SW_RST | SENINF_MUX_CTRL_SENINF_MUX_SW_RST;
> >
> > writel(mux->base + SENINF_MUX_CTRL, val | rst_mask);
> > writel(mux->base + SENINFMUX_CTRL, val & ~rst_mask);
> >
> > that's better, right? :-)

With mtk_seninf_mux_write() instead of writel(), yes :-)

> right :)
> 
> > > +	mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val |
> > > +			     SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
> > > +			     SENINF_MUX_CTRL_SENINF_MUX_SW_RST);
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index af273a477139..9fda342ad331 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13356,6 +13356,7 @@  M:	Julien Stephan <jstephan@baylibre.com>
 M:	Andy Hsieh <andy.hsieh@mediatek.com>
 S:	Supported
 F:	Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
+F:	drivers/media/platform/mediatek/isp/isp_30/seninf/*
 
 MEDIATEK SMI DRIVER
 M:	Yong Wu <yong.wu@mediatek.com>
diff --git a/drivers/media/platform/mediatek/Kconfig b/drivers/media/platform/mediatek/Kconfig
index 84104e2cd024..4e0a5a43f35e 100644
--- a/drivers/media/platform/mediatek/Kconfig
+++ b/drivers/media/platform/mediatek/Kconfig
@@ -7,3 +7,4 @@  source "drivers/media/platform/mediatek/mdp/Kconfig"
 source "drivers/media/platform/mediatek/vcodec/Kconfig"
 source "drivers/media/platform/mediatek/vpu/Kconfig"
 source "drivers/media/platform/mediatek/mdp3/Kconfig"
+source "drivers/media/platform/mediatek/isp/Kconfig"
diff --git a/drivers/media/platform/mediatek/Makefile b/drivers/media/platform/mediatek/Makefile
index 38e6ba917fe5..695f05f525a6 100644
--- a/drivers/media/platform/mediatek/Makefile
+++ b/drivers/media/platform/mediatek/Makefile
@@ -4,3 +4,4 @@  obj-y += mdp/
 obj-y += vcodec/
 obj-y += vpu/
 obj-y += mdp3/
+obj-y += isp/
diff --git a/drivers/media/platform/mediatek/isp/Kconfig b/drivers/media/platform/mediatek/isp/Kconfig
new file mode 100644
index 000000000000..708b9a6660d2
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/Kconfig
@@ -0,0 +1,2 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+source "drivers/media/platform/mediatek/isp/isp_30/Kconfig"
diff --git a/drivers/media/platform/mediatek/isp/Makefile b/drivers/media/platform/mediatek/isp/Makefile
new file mode 100644
index 000000000000..a81ab33d0dd3
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/Makefile
@@ -0,0 +1,3 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-y += isp_30/
diff --git a/drivers/media/platform/mediatek/isp/isp_30/Kconfig b/drivers/media/platform/mediatek/isp/isp_30/Kconfig
new file mode 100644
index 000000000000..831f9bee5fdd
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/Kconfig
@@ -0,0 +1,16 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+config MTK_SENINF
+	tristate "MediaTek ISP3.0 SENINF driver"
+	depends on VIDEO_V4L2_SUBDEV_API
+	depends on MEDIA_CAMERA_SUPPORT
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	select V4L2_FWNODE
+	default n
+	help
+	  This driver provides a MIPI CSI-2 receiver interface to connect
+	  an external camera module with MediaTek ISP3.0. It is able to handle
+	  multiple cameras at the same time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mtk-seninf.
diff --git a/drivers/media/platform/mediatek/isp/isp_30/Makefile b/drivers/media/platform/mediatek/isp/isp_30/Makefile
new file mode 100644
index 000000000000..2e7d731d42b7
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/Makefile
@@ -0,0 +1,3 @@ 
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_MTK_SENINF) += seninf/
diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile b/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
new file mode 100644
index 000000000000..853dad32f2b3
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile
@@ -0,0 +1,5 @@ 
+# SPDX-License-Identifier: GPL-2.0
+
+mtk-seninf-objs += mtk_seninf.o
+
+obj-$(CONFIG_MTK_SENINF) += mtk-seninf.o
diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
new file mode 100644
index 000000000000..93a13a87d967
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c
@@ -0,0 +1,1561 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/videodev2.h>
+#include <media/media-device.h>
+#include <media/media-entity.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-subdev.h>
+
+#include "mtk_seninf_reg.h"
+
+#define SENINF_TIMESTAMP_STEP		0x67
+#define SENINF_SETTLE_DELAY		0x15
+#define SENINF_HS_TRAIL_PARAMETER	0x8
+
+#define SENINF_MAX_NUM_INPUTS		4
+#define SENINF_MAX_NUM_OUTPUTS		6
+#define SENINF_MAX_NUM_MUXES		6
+#define SENINF_MAX_NUM_PADS		(SENINF_MAX_NUM_INPUTS + \
+					 SENINF_MAX_NUM_OUTPUTS)
+
+#define SENINF_DEFAULT_BUS_FMT		MEDIA_BUS_FMT_SGRBG10_1X10
+#define SENINF_DEFAULT_WIDTH		1920
+#define SENINF_DEFAULT_HEIGHT		1080
+
+#define SENINF_PAD_10BIT		0
+
+#define SENINF_TEST_MODEL		0
+#define SENINF_NORMAL_MODEL		1
+#define SENINF_ALL_ERR_IRQ_EN		0x7f
+#define SENINF_IRQ_CLR_SEL		0x80000000
+
+#define SENINF_MIPI_SENSOR		0x8
+
+enum PIXEL_MODE {
+	ONE_PIXEL_MODE  = 0x0,
+	TWO_PIXEL_MODE  = 0x1,
+	FOUR_PIXEL_MODE = 0x2,
+};
+
+/* Port number in the device tree. */
+enum mtk_seninf_port {
+	CSI_PORT_0 = 0,	/* 4D1C or 2D1C */
+	CSI_PORT_1,	/* 4D1C */
+	CSI_PORT_2,	/* 4D1C */
+	CSI_PORT_0B,	/* 2D1C */
+};
+
+enum mtk_seninf_id {
+	SENINF_1 = 0,
+	SENINF_2 = 1,
+	SENINF_3 = 2,
+	SENINF_5 = 4,
+};
+
+static const u32 port_to_seninf_id[] = {
+	[CSI_PORT_0] = SENINF_1,
+	[CSI_PORT_1] = SENINF_3,
+	[CSI_PORT_2] = SENINF_5,
+	[CSI_PORT_0B] = SENINF_2,
+};
+
+enum mtk_seninf_phy_mode {
+	SENINF_PHY_MODE_NONE,
+	SENINF_PHY_MODE_4D1C,
+	SENINF_PHY_MODE_2D1C,
+};
+
+enum mtk_seninf_format_flag {
+	MTK_SENINF_FORMAT_BAYER = BIT(0),
+	MTK_SENINF_FORMAT_DPCM = BIT(1),
+	MTK_SENINF_FORMAT_JPEG = BIT(2),
+	MTK_SENINF_FORMAT_INPUT_ONLY = BIT(3),
+};
+
+/**
+ * struct mtk_seninf_conf - Model-specific SENINF parameters
+ * @model: Model description
+ * @nb_inputs: Number of SENINF inputs
+ * @nb_muxes: Number of SENINF MUX (FIFO) instances
+ * @nb_outputs: Number of outputs (to CAM and CAMSV instances)
+ */
+struct mtk_seninf_conf {
+	const char *model;
+	u8 nb_inputs;
+	u8 nb_muxes;
+	u8 nb_outputs;
+};
+
+/**
+ * struct mtk_seninf_format_info - Information about media bus formats
+ * @code: V4L2 media bus code
+ * @flags: Flags describing the format, as a combination of MTK_SENINF_FORMAT_*
+ */
+struct mtk_seninf_format_info {
+	u32 code;
+	u32 flags;
+};
+
+/**
+ * struct mtk_seninf_input - SENINF input block
+ * @pad: DT port and media entity pad number
+ * @seninf_id: SENINF hardware instance ID
+ * @base: Memory mapped I/O based address
+ * @seninf: Back pointer to the mtk_seninf
+ * @phy: PHY connected to the input
+ * @phy_mode: PHY operation mode (NONE when the input is not connected)
+ * @bus: CSI-2 bus configuration from DT
+ * @source_sd: Source subdev connected to the input
+ */
+struct mtk_seninf_input {
+	enum mtk_seninf_port pad;
+	enum mtk_seninf_id seninf_id;
+	void __iomem *base;
+	struct mtk_seninf *seninf;
+
+	struct phy *phy;
+	enum mtk_seninf_phy_mode phy_mode;
+
+	struct v4l2_mbus_config_mipi_csi2 bus;
+
+	struct v4l2_subdev *source_sd;
+};
+
+/**
+ * struct mtk_seninf_mux - SENINF MUX channel
+ * @pad: DT port and media entity pad number
+ * @mux_id: MUX hardware instance ID
+ * @base: Memory mapped I/O based address
+ * @seninf: Back pointer to the mtk_seninf
+ */
+struct mtk_seninf_mux {
+	unsigned int pad;
+	unsigned int mux_id;
+	void __iomem *base;
+	struct mtk_seninf *seninf;
+};
+
+/**
+ * struct mtk_seninf - Top-level SENINF device
+ * @dev: The (platform) device
+ * @phy: PHYs at the SENINF inputs
+ * @num_clks: Number of clocks in the clks array
+ * @clks: Clocks
+ * @base: Memory mapped I/O base address
+ * @media_dev: Media controller device
+ * @v4l2_dev: V4L2 device
+ * @subdev: V4L2 subdevice
+ * @pads: Media entity pads
+ * @notifier: V4L2 async notifier for source subdevs
+ * @ctrl_handler: V4L2 controls handler
+ * @source_format: Active format on the source pad
+ * @inputs: Array of SENINF inputs
+ * @muxes: Array of MUXes
+ * @conf: Model-specific SENINF parameters
+ * @is_testmode: Whether or not the test pattern generator is enabled
+ */
+struct mtk_seninf {
+	struct device *dev;
+	struct phy *phy[5];
+	unsigned int num_clks;
+	struct clk_bulk_data *clks;
+	void __iomem *base;
+
+	struct media_device media_dev;
+	struct v4l2_device v4l2_dev;
+	struct v4l2_subdev subdev;
+	struct media_pad pads[SENINF_MAX_NUM_PADS];
+	struct v4l2_async_notifier notifier;
+	struct v4l2_ctrl_handler ctrl_handler;
+
+	struct mtk_seninf_input inputs[SENINF_MAX_NUM_INPUTS];
+	struct mtk_seninf_mux muxes[SENINF_MAX_NUM_MUXES];
+
+	const struct mtk_seninf_conf *conf;
+
+	bool is_testmode;
+};
+
+inline struct mtk_seninf *sd_to_mtk_seninf(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct mtk_seninf, subdev);
+}
+
+static inline bool mtk_seninf_pad_is_sink(struct mtk_seninf *priv,
+					  unsigned int pad)
+{
+	return pad < priv->conf->nb_inputs;
+}
+
+static inline bool mtk_seninf_pad_is_source(struct mtk_seninf *priv,
+					    unsigned int pad)
+{
+	return !mtk_seninf_pad_is_sink(priv, pad);
+}
+
+/* -----------------------------------------------------------------------------
+ * Formats
+ */
+
+static const struct mtk_seninf_format_info mtk_seninf_formats[] = {
+	{
+		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG8_1X8,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG8_1X8,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB8_1X8,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG10_1X10,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR12_1X12,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG12_1X12,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG12_1X12,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR14_1X14,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG14_1X14,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG14_1X14,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB14_1X14,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR16_1X16,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG16_1X16,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SGRBG16_1X16,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB16_1X16,
+		.flags = MTK_SENINF_FORMAT_BAYER,
+	}, {
+		.code = MEDIA_BUS_FMT_UYVY8_1X16,
+	}, {
+		.code = MEDIA_BUS_FMT_VYUY8_1X16,
+	}, {
+		.code = MEDIA_BUS_FMT_YUYV8_1X16,
+	}, {
+		.code = MEDIA_BUS_FMT_YVYU8_1X16,
+	}, {
+		.code = MEDIA_BUS_FMT_JPEG_1X8,
+		.flags = MTK_SENINF_FORMAT_JPEG,
+	}, {
+		.code = MEDIA_BUS_FMT_S5C_UYVY_JPEG_1X8,
+		.flags = MTK_SENINF_FORMAT_JPEG,
+	},
+	/* Keep the input-only formats last. */
+	{
+		.code = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
+		.flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8,
+		.flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
+	}, {
+		.code = MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8,
+		.flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
+	}, {
+		.code = MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8,
+		.flags = MTK_SENINF_FORMAT_DPCM | MTK_SENINF_FORMAT_INPUT_ONLY,
+	}
+};
+
+static const struct mtk_seninf_format_info *mtk_seninf_format_info(u32 code)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(mtk_seninf_formats); ++i) {
+		if (mtk_seninf_formats[i].code == code)
+			return &mtk_seninf_formats[i];
+	}
+
+	return NULL;
+}
+
+/* -----------------------------------------------------------------------------
+ * I/O Accessors
+ */
+static u32 mtk_seninf_read(struct mtk_seninf *priv, u32 reg)
+{
+	return readl(priv->base + reg);
+}
+
+static void mtk_seninf_write(struct mtk_seninf *priv, u32 reg, u32 value)
+{
+	writel(value, priv->base + reg);
+}
+
+static void __mtk_seninf_update(struct mtk_seninf *priv, u32 reg,
+				u32 mask, u32 value)
+{
+	u32 val = mtk_seninf_read(priv, reg);
+
+	mtk_seninf_write(priv, reg, (val & ~mask) | (value & mask));
+}
+
+#define mtk_seninf_update(priv, reg, field, val)			\
+	__mtk_seninf_update(priv, reg, reg##_##field,		\
+			    FIELD_PREP(reg##_##field, val))
+
+static u32 mtk_seninf_input_read(struct mtk_seninf_input *input, u32 reg)
+{
+	return readl(input->base + reg);
+}
+
+static void mtk_seninf_input_write(struct mtk_seninf_input *input, u32 reg,
+				   u32 value)
+{
+	writel(value, input->base + reg);
+}
+
+static void __mtk_seninf_input_update(struct mtk_seninf_input *input, u32 reg,
+				      u32 mask, u32 value)
+{
+	u32 val = mtk_seninf_input_read(input, reg);
+
+	mtk_seninf_input_write(input, reg, (val & ~mask) | (value & mask));
+}
+
+#define mtk_seninf_input_update(input, reg, field, val)			\
+	__mtk_seninf_input_update(input, reg, reg##_##field,	\
+				  FIELD_PREP(reg##_##field, val))
+
+static u32 mtk_seninf_mux_read(struct mtk_seninf_mux *mux, u32 reg)
+{
+	return readl(mux->base + reg);
+}
+
+static void mtk_seninf_mux_write(struct mtk_seninf_mux *mux, u32 reg,
+				 u32 value)
+{
+	writel(value, mux->base + reg);
+}
+
+static void __mtk_seninf_mux_update(struct mtk_seninf_mux *mux, u32 reg,
+				    u32 mask, u32 value)
+{
+	u32 val = mtk_seninf_mux_read(mux, reg);
+
+	mtk_seninf_mux_write(mux, reg, (val & ~mask) | (value & mask));
+}
+
+#define mtk_seninf_mux_update(mux, reg, field, val)			\
+	__mtk_seninf_mux_update(mux, reg, reg##_##field,	\
+				FIELD_PREP(reg##_##field, val))
+
+/* -----------------------------------------------------------------------------
+ * Hardware Configuration
+ *
+ * The SENINF is the camera sensor interface. On the input side it contains
+ * input channels (also named SENINF), each made of a CSI-2 receiver, an
+ * interface for parallel sensors, and a test pattern generator. The inputs are
+ * routed through a N:M crossbar switch (TOP MUX) to VC/DT filters with a FIFO
+ * (MUX). The MUX are routed to another N:M crossbar switch (CAM MUX), whose
+ * output is then connected to other IP cores.
+ *
+ *            +-------------------------------------------------------+
+ *            | SENINF                                                |
+ *            |                                                       |
+ * +-------+  |   +----------+    TOP MUX                             |
+ * |       |  |   |  SENINF  |      |\                        CAM MUX |
+ * | D-PHY | ---> | CSI-2 RX | ---> | |      +------------+      |\   |
+ * |       |  |   |   TPG    |   -> | | ---> | MUX (FIFO) | ---> | | ---> CAMSV
+ * +-------+  |   +----------+   -> | |      +------------+   -> | |  |
+ *            |                     |/                        -> | |  |
+ *            |                                                  |/   |
+ *            |                                                       |
+ *    ...     |       ...                         ...                --->
+ *            |                                                       |
+ *            |                                                       |
+ *            +-------------------------------------------------------+
+ *
+ * The number of PHYs, SENINF and MUX differ between SoCs. MT8167 has a single
+ * MUX and thus no output CAM MUX crossbar switch.
+ */
+
+static void mtk_seninf_csi2_setup_phy(struct mtk_seninf *priv)
+{
+	/* CSI0 */
+	if (priv->inputs[CSI_PORT_0].phy) {
+		struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_0];
+
+		mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0,
+				  DPHY_MODE, 0 /* 4D1C*/);
+		mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0,
+				  CK_SEL_1, input->bus.clock_lane);
+		mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0,
+				  CK_SEL_2, 2);
+		mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI0,
+				  PHY_SENINF_LANE_MUX_CSI0_EN, 1);
+	}
+
+	/* CSI1 */
+	if (priv->inputs[CSI_PORT_1].phy) {
+		struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_1];
+
+		mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI1,
+				  DPHY_MODE, 0 /* 4D1C */);
+		mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI1,
+				  CK_SEL_1, input->bus.clock_lane);
+		mtk_seninf_update(priv, SENINF_TOP_PHY_SENINF_CTL_CSI1,
+				  PHY_SENINF_LANE_MUX_CSI1_EN, 1);
+	}
+}
+
+static void mtk_seninf_input_setup_csi2_rx(struct mtk_seninf_input *input)
+{
+	unsigned int lanes[4] = { };
+	unsigned int i;
+
+	/*
+	 * Configure data lane muxing. In 2D1C mode, lanes 0 to 2 correspond to
+	 * CSIx[AB]_L{0,1,2}, and in 4D1C lanes 0 to 5 correspond to
+	 * CSIxA_L{0,1,2}, CSIxB_L{0,1,2}.
+	 *
+	 * The clock lane must be skipped when calculating the index of the
+	 * physical data lane. For instance, in 4D1C mode, the sensor clock
+	 * lane is typically connected to lane 2 (CSIxA_L2), and the sensor
+	 * data lanes 0-3 to lanes 1 (CSIxA_L1), 3 (CSIxB_L0), 0 (CSIxA_L0) and
+	 * 4 (CSIxB_L1). The when skipping the clock lane, the data lane
+	 * indices become 1, 2, 0 and 3.
+	 */
+	for (i = 0; i < input->bus.num_data_lanes; ++i) {
+		lanes[i] = input->bus.data_lanes[i];
+		if (lanes[i] > input->bus.clock_lane)
+			lanes[i]--;
+	}
+
+	mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0,
+				CSI0_BIST_LN0_MUX, lanes[0]);
+	mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0,
+				CSI0_BIST_LN1_MUX, lanes[1]);
+	mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0,
+				CSI0_BIST_LN2_MUX, lanes[2]);
+	mtk_seninf_input_update(input, MIPI_RX_CON24_CSI0,
+				CSI0_BIST_LN3_MUX, lanes[3]);
+}
+
+static void mtk_seninf_input_setup_csi2(struct mtk_seninf_input *input,
+					struct v4l2_subdev_state *state)
+{
+	const struct mtk_seninf_format_info *fmtinfo;
+	const struct v4l2_mbus_framefmt *format;
+	unsigned int dpcm;
+	unsigned int data_lane_num = input->bus.num_data_lanes;
+	unsigned int data_header_order = 1;
+	unsigned int val = 0;
+
+	format = v4l2_subdev_state_get_stream_format(state, input->pad, 0);
+	fmtinfo = mtk_seninf_format_info(format->code);
+
+	/* Configure timestamp */
+	mtk_seninf_input_write(input, SENINF_TG1_TM_STP, SENINF_TIMESTAMP_STEP);
+
+	/* HQ */
+	mtk_seninf_input_write(input, SENINF_TG1_PH_CNT, 0x0);
+	mtk_seninf_input_write(input, SENINF_TG1_SEN_CK, 0x10001);
+
+	/* First Enable Sensor interface and select pad (0x1a04_0200) */
+	mtk_seninf_input_update(input, SENINF_CTRL, SENINF_EN, 1);
+	mtk_seninf_input_update(input, SENINF_CTRL, PAD2CAM_DATA_SEL, SENINF_PAD_10BIT);
+	mtk_seninf_input_update(input, SENINF_CTRL, SENINF_SRC_SEL, 0);
+	mtk_seninf_input_update(input, SENINF_CTRL_EXT, SENINF_CSI2_IP_EN, 1);
+	mtk_seninf_input_update(input, SENINF_CTRL_EXT, SENINF_NCSI2_IP_EN, 0);
+
+	/* DPCM Enable */
+	dpcm = fmtinfo->flags & MTK_SENINF_FORMAT_DPCM ? 0x2a : 0;
+	val = 1 << ((dpcm == 0x2a) ? 15 : ((dpcm & 0xF) + 7));
+	mtk_seninf_input_write(input, SENINF_CSI2_DPCM, val);
+
+	/* Settle delay */
+	mtk_seninf_input_update(input, SENINF_CSI2_LNRD_TIMING,
+				DATA_SETTLE_PARAMETER, SENINF_SETTLE_DELAY);
+
+	/* HQ */
+	mtk_seninf_input_write(input, SENINF_CSI2_LNRC_FSM, 0x10);
+
+	/* CSI2 control */
+	val = mtk_seninf_input_read(input, SENINF_CSI2_CTL)
+	    | (data_header_order << 16) | 0x10 | ((1 << data_lane_num) - 1);
+	mtk_seninf_input_write(input, SENINF_CSI2_CTL, val);
+
+	mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL,
+				BYPASS_LANE_RESYNC, 0);
+	mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL, CDPHY_SEL, 0);
+	mtk_seninf_input_update(input, SENINF_CSI2_RESYNC_MERGE_CTL,
+				CPHY_LANE_RESYNC_CNT, 3);
+	mtk_seninf_input_update(input, SENINF_CSI2_MODE, CSR_CSI2_MODE, 0);
+	mtk_seninf_input_update(input, SENINF_CSI2_MODE, CSR_CSI2_HEADER_LEN, 0);
+	mtk_seninf_input_update(input, SENINF_CSI2_DPHY_SYNC, SYNC_SEQ_MASK_0, 0xff00);
+	mtk_seninf_input_update(input, SENINF_CSI2_DPHY_SYNC, SYNC_SEQ_PAT_0, 0x001d);
+
+	mtk_seninf_input_update(input, SENINF_CSI2_CTL, CLOCK_HS_OPTION, 0);
+	mtk_seninf_input_update(input, SENINF_CSI2_CTL, HSRX_DET_EN, 0);
+	mtk_seninf_input_update(input, SENINF_CSI2_CTL, HS_TRAIL_EN, 1);
+	mtk_seninf_input_update(input, SENINF_CSI2_HS_TRAIL, HS_TRAIL_PARAMETER,
+				SENINF_HS_TRAIL_PARAMETER);
+
+	/* Set debug port to output packet number */
+	mtk_seninf_input_update(input, SENINF_CSI2_DGB_SEL, DEBUG_EN, 1);
+	mtk_seninf_input_update(input, SENINF_CSI2_DGB_SEL, DEBUG_SEL, 0x1a);
+
+	/* HQ */
+	mtk_seninf_input_write(input, SENINF_CSI2_SPARE0, 0xfffffffe);
+
+	/* Enable CSI2 IRQ mask */
+	/* Turn on all interrupt */
+	mtk_seninf_input_write(input, SENINF_CSI2_INT_EN, 0xffffffff);
+	/* Write clear CSI2 IRQ */
+	mtk_seninf_input_write(input, SENINF_CSI2_INT_STATUS, 0xffffffff);
+	/* Enable CSI2 Extend IRQ mask */
+	/* Turn on all interrupt */
+	mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 1);
+	udelay(1);
+	mtk_seninf_input_update(input, SENINF_CTRL, CSI2_SW_RST, 0);
+}
+
+static void mtk_seninf_mux_setup(struct mtk_seninf_mux *mux,
+				 struct mtk_seninf_input *input,
+				 struct v4l2_subdev_state *state)
+{
+	const struct mtk_seninf_format_info *fmtinfo;
+	const struct v4l2_mbus_framefmt *format;
+	unsigned int pix_sel_ext;
+	unsigned int pix_sel;
+	unsigned int hs_pol = 0;
+	unsigned int vs_pol = 0;
+	unsigned int pixel_mode = TWO_PIXEL_MODE;
+	unsigned int val;
+
+	format = v4l2_subdev_state_get_stream_format(state, input->pad, 0);
+	fmtinfo = mtk_seninf_format_info(format->code);
+
+	/* Enable mux */
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_MUX_EN, 1);
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_SRC_SEL,
+			      SENINF_MIPI_SENSOR);
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
+			      SENINF_SRC_SEL_EXT, SENINF_NORMAL_MODEL);
+
+	switch (pixel_mode) {
+	case 1: /* 2 Pixel */
+		pix_sel_ext = 0;
+		pix_sel = 1;
+		break;
+	case 2: /* 4 Pixel */
+		pix_sel_ext = 1;
+		pix_sel = 0;
+		break;
+	default: /* 1 Pixel */
+		pix_sel_ext = 0;
+		pix_sel = 0;
+		break;
+	}
+
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
+			      SENINF_PIX_SEL_EXT, pix_sel_ext);
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_PIX_SEL, pix_sel);
+
+	if (!(fmtinfo->flags & MTK_SENINF_FORMAT_JPEG)) {
+		mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 2);
+		mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN, 0x1b);
+		mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN, 0x1f);
+	} else {
+		mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 0);
+		mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN, 0x18);
+		mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN, 0x1e);
+	}
+
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_POL, hs_pol);
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_VSYNC_POL, vs_pol);
+
+	val = mtk_seninf_mux_read(mux, SENINF_MUX_CTRL);
+	mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val |
+			     SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
+			     SENINF_MUX_CTRL_SENINF_MUX_SW_RST);
+	mtk_seninf_mux_write(mux, SENINF_MUX_CTRL, val &
+			     ~(SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
+			       SENINF_MUX_CTRL_SENINF_MUX_SW_RST));
+
+	/* HQ */
+	mtk_seninf_mux_write(mux, SENINF_MUX_SPARE, 0xc2000);
+}
+
+static void mtk_seninf_top_mux_setup(struct mtk_seninf *priv,
+				     enum mtk_seninf_id seninf_id,
+				     struct mtk_seninf_mux *mux)
+{
+	unsigned int val;
+
+	/*
+	 * Use the top mux (from SENINF input to MUX) to configure routing, and
+	 * hardcode a 1:1 mapping from the MUX instances to the SENINF outputs.
+	 */
+	val = mtk_seninf_read(priv, SENINF_TOP_MUX_CTRL)
+		& ~(0xf << (mux->mux_id * 4));
+	val |= (seninf_id & 0xf) << (mux->mux_id * 4);
+	mtk_seninf_write(priv, SENINF_TOP_MUX_CTRL, val);
+
+	mtk_seninf_write(priv, SENINF_TOP_CAM_MUX_CTRL, 0x76541010);
+}
+
+static void seninf_enable_test_pattern(struct mtk_seninf *priv,
+				       struct v4l2_subdev_state *state)
+{
+	struct mtk_seninf_input *input = &priv->inputs[CSI_PORT_0];
+	struct mtk_seninf_mux *mux = &priv->muxes[0];
+	const struct mtk_seninf_format_info *fmtinfo;
+	const struct v4l2_mbus_framefmt *format;
+	unsigned int val;
+	unsigned int pixel_mode = TWO_PIXEL_MODE;
+	unsigned int pix_sel_ext;
+	unsigned int pix_sel;
+	unsigned int hs_pol = 0;
+	unsigned int vs_pol = 0;
+	unsigned int seninf = 0;
+	unsigned int mux_id = mux->mux_id;
+
+	format = v4l2_subdev_state_get_stream_format(state, priv->conf->nb_inputs, 0);
+	fmtinfo = mtk_seninf_format_info(format->code);
+
+	mtk_seninf_update(priv, SENINF_TOP_CTRL, MUX_LP_MODE, 0);
+
+	mtk_seninf_update(priv, SENINF_TOP_CTRL, SENINF_PCLK_EN, 1);
+	mtk_seninf_update(priv, SENINF_TOP_CTRL, SENINF2_PCLK_EN, 1);
+
+	mtk_seninf_input_update(input, SENINF_CTRL, SENINF_EN, 1);
+	mtk_seninf_input_update(input, SENINF_CTRL, SENINF_SRC_SEL, 1);
+	mtk_seninf_input_update(input, SENINF_CTRL_EXT,
+				SENINF_TESTMDL_IP_EN, 1);
+
+	mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_EN, 1);
+	mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_PAT, 0xc);
+	mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_VSYNC, 4);
+	mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_DUMMYPXL, 0x28);
+
+	if (fmtinfo->flags & MTK_SENINF_FORMAT_BAYER)
+		mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_FMT, 0x0);
+	else
+		mtk_seninf_input_update(input, SENINF_TG1_TM_CTL, TM_FMT, 0x1);
+
+	switch (format->code) {
+	case MEDIA_BUS_FMT_UYVY8_1X16:
+	case MEDIA_BUS_FMT_VYUY8_1X16:
+	case MEDIA_BUS_FMT_YUYV8_1X16:
+	case MEDIA_BUS_FMT_YVYU8_1X16:
+		mtk_seninf_input_write(input, SENINF_TG1_TM_SIZE,
+				       (format->height + 8) << 16 |
+				       format->width * 2);
+		break;
+	default:
+		mtk_seninf_input_write(input, SENINF_TG1_TM_SIZE,
+				       (format->height + 8) << 16 |
+				       format->width);
+		break;
+	}
+
+	mtk_seninf_input_write(input, SENINF_TG1_TM_CLK, 0x8);
+	mtk_seninf_input_write(input, SENINF_TG1_TM_STP, 0x1);
+
+	/* Set top mux */
+	val = (mtk_seninf_read(priv, SENINF_TOP_MUX_CTRL) & (~(0xf << (mux_id * 4)))) |
+		((seninf & 0xf) << (mux_id * 4));
+	mtk_seninf_write(priv, SENINF_TOP_MUX_CTRL, val);
+
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_MUX_EN, 1);
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
+			      SENINF_SRC_SEL_EXT, SENINF_TEST_MODEL);
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_SRC_SEL, 1);
+
+	switch (pixel_mode) {
+	case 1:
+		pix_sel_ext = 0;
+		pix_sel = 1;
+		break;
+	case 2:
+		pix_sel_ext = 1;
+		pix_sel = 0;
+		break;
+	default:
+		pix_sel_ext = 0;
+		pix_sel = 0;
+		break;
+	}
+
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL_EXT,
+			      SENINF_PIX_SEL_EXT, pix_sel_ext);
+
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_PIX_SEL, pix_sel);
+
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_PUSH_EN, 0x1f);
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FLUSH_EN, 0x1b);
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, FIFO_FULL_WR_EN, 2);
+
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_POL, hs_pol);
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_VSYNC_POL, vs_pol);
+	mtk_seninf_mux_update(mux, SENINF_MUX_CTRL, SENINF_HSYNC_MASK, 1);
+
+	mtk_seninf_mux_write(mux, SENINF_MUX_INTEN,
+			     SENINF_IRQ_CLR_SEL | SENINF_ALL_ERR_IRQ_EN);
+
+	mtk_seninf_mux_write(mux, SENINF_MUX_CTRL,
+			     mtk_seninf_mux_read(mux, SENINF_MUX_CTRL) |
+			     SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
+			     SENINF_MUX_CTRL_SENINF_MUX_SW_RST);
+	udelay(1);
+	mtk_seninf_mux_write(mux, SENINF_MUX_CTRL,
+			     mtk_seninf_mux_read(mux, SENINF_MUX_CTRL) &
+			     ~(SENINF_MUX_CTRL_SENINF_IRQ_SW_RST |
+			       SENINF_MUX_CTRL_SENINF_MUX_SW_RST));
+
+	//check this
+	mtk_seninf_write(priv, SENINF_TOP_CAM_MUX_CTRL, 0x76540010);
+
+	dev_dbg(priv->dev, "%s: OK\n", __func__);
+}
+
+static void mtk_seninf_start(struct mtk_seninf *priv,
+			     struct v4l2_subdev_state *state,
+			     struct mtk_seninf_input *input,
+			     struct mtk_seninf_mux *mux)
+{
+	phy_power_on(input->phy);
+
+	mtk_seninf_input_setup_csi2_rx(input);
+	mtk_seninf_input_setup_csi2(input, state);
+
+	mtk_seninf_mux_setup(mux, input, state);
+	mtk_seninf_top_mux_setup(priv, input->seninf_id, mux);
+}
+
+static void mtk_seninf_stop(struct mtk_seninf *priv,
+			    struct mtk_seninf_input *input)
+{
+	unsigned int val;
+
+	/* Disable CSI2(2.5G) first */
+	val = mtk_seninf_input_read(input, SENINF_CSI2_CTL);
+	val &= ~(SENINF_CSI2_CTL_CLOCK_LANE_EN |
+		 SENINF_CSI2_CTL_DATA_LANE3_EN |
+		 SENINF_CSI2_CTL_DATA_LANE2_EN |
+		 SENINF_CSI2_CTL_DATA_LANE1_EN |
+		 SENINF_CSI2_CTL_DATA_LANE0_EN);
+	mtk_seninf_input_write(input, SENINF_CSI2_CTL, val);
+
+	if (!priv->is_testmode)
+		phy_power_off(input->phy);
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Controls
+ */
+
+static int seninf_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct mtk_seninf *priv = container_of(ctrl->handler,
+					       struct mtk_seninf, ctrl_handler);
+
+	switch (ctrl->id) {
+	case V4L2_CID_TEST_PATTERN:
+		priv->is_testmode = !!ctrl->val;
+		break;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops seninf_ctrl_ops = {
+	.s_ctrl = seninf_set_ctrl,
+};
+
+static const char *const seninf_test_pattern_menu[] = {
+	"No test pattern",
+	"Static horizontal color bars",
+};
+
+static int seninf_initialize_controls(struct mtk_seninf *priv)
+{
+	struct v4l2_ctrl_handler *handler;
+	int ret;
+
+	handler = &priv->ctrl_handler;
+	ret = v4l2_ctrl_handler_init(handler, 2);
+	if (ret)
+		return ret;
+
+	v4l2_ctrl_new_std_menu_items(handler, &seninf_ctrl_ops,
+				     V4L2_CID_TEST_PATTERN,
+				     ARRAY_SIZE(seninf_test_pattern_menu) - 1,
+				     0, 0, seninf_test_pattern_menu);
+
+	priv->is_testmode = false;
+
+	if (handler->error) {
+		ret = handler->error;
+		dev_err(priv->dev,
+			"Failed to init controls(%d)\n", ret);
+		v4l2_ctrl_handler_free(handler);
+		return ret;
+	}
+
+	priv->subdev.ctrl_handler = handler;
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdev Operations
+ */
+static int seninf_s_stream(struct v4l2_subdev *sd, unsigned int source_pad,
+			   int on)
+{
+	struct mtk_seninf *priv = sd_to_mtk_seninf(sd);
+	struct v4l2_subdev_state *state;
+	struct mtk_seninf_input *input;
+	struct mtk_seninf_mux *mux;
+	struct v4l2_subdev *source;
+	u32 sink_pad;
+	int ret;
+
+	/* Stream control can only operate on source pads. */
+	if (source_pad < priv->conf->nb_inputs ||
+	    source_pad >= priv->conf->nb_inputs + priv->conf->nb_outputs)
+		return -EINVAL;
+
+	/*
+	 * Locate the SENINF input and MUX for the source pad.
+	 *
+	 * Hardcode a 1:1 mapping of MUX instances to SENINF
+	 * outputs to match the TOP_CAM_MUX configuration in
+	 * mtk_seninf_top_mux_setup().
+	 */
+	state = v4l2_subdev_lock_and_get_active_state(&priv->subdev);
+	if (!state)
+		return -EPIPE;
+
+	ret = v4l2_subdev_routing_find_opposite_end(&state->routing, source_pad, 0, &sink_pad,
+						    NULL);
+	if (ret) {
+		dev_dbg(priv->dev, "No sink pad routed to source pad %u\n",
+			source_pad);
+		goto unlock;
+	}
+
+	input = &priv->inputs[sink_pad];
+	mux = &priv->muxes[source_pad - priv->conf->nb_inputs];
+
+	if (!on) {
+		if (!priv->is_testmode) {
+			source = input->source_sd;
+			ret = v4l2_subdev_call(source, video, s_stream, 0);
+			if (ret)
+				dev_err(priv->dev,
+					"failed to stop source %s: %d\n",
+					source->entity.name, ret);
+		}
+
+		mtk_seninf_stop(priv, input);
+		pm_runtime_put(priv->dev);
+		goto unlock;
+	}
+
+	ret = pm_runtime_get_sync(priv->dev);
+	if (ret < 0) {
+		dev_err(priv->dev, "Failed to pm_runtime_get_sync: %d\n", ret);
+		pm_runtime_put_noidle(priv->dev);
+		goto unlock;
+	}
+
+	/* If test mode is enabled, just enable the test pattern generator. */
+	if (priv->is_testmode) {
+		seninf_enable_test_pattern(priv, state);
+		ret = 0;
+		goto unlock;
+	}
+
+	/* Start the SENINF first and then the source. */
+	mtk_seninf_start(priv, state, input, mux);
+
+	source = input->source_sd;
+	ret = v4l2_subdev_call(source, video, s_stream, 1);
+	if (ret) {
+		dev_err(priv->dev, "failed to start source %s: %d\n",
+			source->entity.name, ret);
+		mtk_seninf_stop(priv, input);
+		pm_runtime_put(priv->dev);
+	}
+
+unlock:
+	v4l2_subdev_unlock_state(state);
+	return ret;
+};
+
+static int seninf_enable_streams(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_state *state, u32 pad,
+				 u64 streams_mask)
+{
+	return seninf_s_stream(sd, pad, 1);
+}
+
+static int seninf_disable_streams(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_state *state, u32 pad,
+				  u64 streams_mask)
+{
+	return seninf_s_stream(sd, pad, 0);
+}
+
+static const struct v4l2_mbus_framefmt mtk_seninf_default_fmt = {
+	.code = SENINF_DEFAULT_BUS_FMT,
+	.width = SENINF_DEFAULT_WIDTH,
+	.height = SENINF_DEFAULT_HEIGHT,
+	.field = V4L2_FIELD_NONE,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+	.xfer_func = V4L2_XFER_FUNC_DEFAULT,
+	.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
+	.quantization = V4L2_QUANTIZATION_DEFAULT,
+};
+
+static int __seninf_set_routing(struct v4l2_subdev *sd,
+				struct v4l2_subdev_state *state,
+				struct v4l2_subdev_krouting *routing)
+{
+	int ret;
+
+	ret = v4l2_subdev_routing_validate(sd, routing, V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
+	if (ret)
+		return ret;
+
+	ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing,
+					       &mtk_seninf_default_fmt);
+
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int seninf_init_cfg(struct v4l2_subdev *sd,
+			   struct v4l2_subdev_state *state)
+{
+	struct mtk_seninf *priv = sd_to_mtk_seninf(sd);
+	struct v4l2_subdev_route routes[SENINF_MAX_NUM_OUTPUTS] = { };
+	struct v4l2_subdev_krouting routing = {
+		.routes = routes,
+	};
+	unsigned int i;
+
+	/*
+	 * Initialize one route for supported source pads.
+	 * It is a single route from the first sink pad to the source pad,
+	 * while on SENINF 5.0 the routing table will map sink pads to source
+	 * pads connected to CAMSV 1:1 (skipping the first two source pads
+	 * connected to the CAM instances).
+	 */
+	routing.num_routes = priv->conf->nb_outputs;
+
+	for (i = 0; i < routing.num_routes; i++) {
+		struct v4l2_subdev_route *route = &routes[i];
+
+		route->sink_pad = i;
+		route->sink_stream = 0;
+		route->source_pad = priv->conf->nb_inputs + i;
+		route->source_stream = 0;
+		route->flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE;
+	}
+
+	return __seninf_set_routing(sd, state, &routing);
+}
+
+static int seninf_enum_mbus_code(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_state *state,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	const struct mtk_seninf_format_info *fmtinfo;
+	struct mtk_seninf *priv = sd_to_mtk_seninf(sd);
+
+	if (code->index >= ARRAY_SIZE(mtk_seninf_formats))
+		return -EINVAL;
+
+	fmtinfo = &mtk_seninf_formats[code->index];
+	if (fmtinfo->flags & MTK_SENINF_FORMAT_INPUT_ONLY &&
+	    mtk_seninf_pad_is_source(priv, code->pad))
+		return -EINVAL;
+
+	code->code = fmtinfo->code;
+
+	return 0;
+}
+
+static int seninf_set_fmt(struct v4l2_subdev *sd,
+			  struct v4l2_subdev_state *state,
+			  struct v4l2_subdev_format *fmt)
+{
+	struct mtk_seninf *priv = sd_to_mtk_seninf(sd);
+	const struct mtk_seninf_format_info *fmtinfo;
+	struct v4l2_mbus_framefmt *format;
+
+	/*
+	 * TODO (?): We should disallow setting formats on the source pad
+	 * completely, as the SENINF can't perform any processing. This would
+	 * however break usage of the test pattern generator, as there would be
+	 * no way to configure formats at all when no active input is selected.
+	 */
+
+	/*
+	 * Default to the first format if the requested media bus code isn't
+	 * supported.
+	 */
+	fmtinfo = mtk_seninf_format_info(fmt->format.code);
+	if (!fmtinfo) {
+		fmtinfo = &mtk_seninf_formats[0];
+		fmt->format.code = fmtinfo->code;
+	}
+
+	/* Interlaced formats are not supported yet. */
+	fmt->format.field = V4L2_FIELD_NONE;
+
+	/* Store the format. */
+
+	format = v4l2_subdev_state_get_stream_format(state, fmt->pad, fmt->stream);
+	if (!format)
+		return -EINVAL;
+
+	*format = fmt->format;
+
+	if (mtk_seninf_pad_is_source(priv, fmt->pad))
+		return 0;
+
+	/* Propagate the format to the corresponding source pad. */
+	format = v4l2_subdev_state_get_opposite_stream_format(state, fmt->pad,
+							      fmt->stream);
+	if (!format)
+		return -EINVAL;
+
+	*format = fmt->format;
+
+	return 0;
+}
+
+static int seninf_set_routing(struct v4l2_subdev *sd,
+			      struct v4l2_subdev_state *state,
+			      enum v4l2_subdev_format_whence which,
+			      struct v4l2_subdev_krouting *routing)
+{
+	return __seninf_set_routing(sd, state, routing);
+}
+
+static const struct v4l2_subdev_core_ops seninf_subdev_core_ops = {
+	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static const struct v4l2_subdev_pad_ops seninf_subdev_pad_ops = {
+	.init_cfg = seninf_init_cfg,
+	.enum_mbus_code = seninf_enum_mbus_code,
+	.get_fmt = v4l2_subdev_get_fmt,
+	.set_fmt = seninf_set_fmt,
+	.link_validate = v4l2_subdev_link_validate_default,
+	.set_routing = seninf_set_routing,
+	.enable_streams = seninf_enable_streams,
+	.disable_streams = seninf_disable_streams,
+};
+
+static const struct v4l2_subdev_ops seninf_subdev_ops = {
+	.core = &seninf_subdev_core_ops,
+	.pad = &seninf_subdev_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media Entity Operations
+ */
+
+static const struct media_entity_operations seninf_media_ops = {
+	.get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+/* -----------------------------------------------------------------------------
+ * Async Subdev Notifier
+ */
+
+struct mtk_seninf_async_subdev {
+	struct v4l2_async_subdev asd;
+	struct mtk_seninf_input *input;
+	unsigned int port;
+};
+
+static int mtk_seninf_fwnode_parse(struct device *dev,
+				   unsigned int id)
+
+{
+	static const char * const phy_names[] = { "csi0", "csi1", "csi2", "csi0b"};
+
+	struct mtk_seninf *priv = dev_get_drvdata(dev);
+	struct mtk_seninf_async_subdev *s_asd;
+	unsigned int port;
+	struct mtk_seninf_input *input;
+	struct fwnode_handle *ep, *fwnode;
+	struct v4l2_fwnode_endpoint vep = {
+		.bus_type = V4L2_MBUS_CSI2_DPHY,
+	};
+	struct v4l2_async_subdev *asd;
+	int ret;
+
+	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), id, 0, 0);
+	if (!ep)
+		return 0;
+
+	fwnode = fwnode_graph_get_remote_endpoint(ep);
+	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+	if (ret) {
+		dev_err(dev, "Failed to parse %pOF\n", to_of_node(fwnode));
+		ret = -EINVAL;
+		goto out;
+	}
+
+	asd = v4l2_async_nf_add_fwnode(&priv->notifier,
+				       fwnode, struct v4l2_async_subdev);
+	if (IS_ERR(asd)) {
+		ret = PTR_ERR(asd);
+		goto out;
+	}
+	s_asd = container_of(asd, struct mtk_seninf_async_subdev, asd);
+
+	port = vep.base.port;
+	s_asd->port = port;
+
+	if (mtk_seninf_pad_is_source(priv, port))
+		return 0;
+
+	if (vep.bus_type != V4L2_MBUS_CSI2_DPHY) {
+		dev_err(dev, "Only CSI2 bus type is currently supported\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	input = &priv->inputs[port];
+
+	input->pad = port;
+	input->seninf_id = port_to_seninf_id[port];
+	input->base = priv->base + 0x1000 * input->seninf_id;
+	input->seninf = priv;
+
+	input->bus = vep.bus.mipi_csi2;
+
+	input->phy = devm_phy_get(dev, phy_names[port]);
+	if (IS_ERR(input->phy)) {
+		dev_err(dev, "failed to get phy:%ld\n", PTR_ERR(input->phy));
+		ret = PTR_ERR(input->phy);
+		goto out;
+	}
+	input->phy_mode = SENINF_PHY_MODE_4D1C;
+
+	s_asd->input = input;
+
+	ret = 0;
+out:
+	fwnode_handle_put(ep);
+	fwnode_handle_put(fwnode);
+	return ret;
+}
+
+static int mtk_seninf_notifier_bound(struct v4l2_async_notifier *notifier,
+				     struct v4l2_subdev *sd,
+				     struct v4l2_async_subdev *asd)
+{
+	struct mtk_seninf *priv = container_of(notifier, struct mtk_seninf, notifier);
+	struct mtk_seninf_async_subdev *s_asd =
+		container_of(asd, struct mtk_seninf_async_subdev, asd);
+	struct device_link *link;
+	int ret;
+
+	dev_dbg(priv->dev, "%s bound to SENINF port %u\n", sd->entity.name,
+		s_asd->port);
+
+	if (mtk_seninf_pad_is_sink(priv, s_asd->port)) {
+		struct mtk_seninf_input *input = s_asd->input;
+
+		input->source_sd = sd;
+
+		link = device_link_add(priv->dev, sd->dev,
+				       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+		if (!link) {
+			dev_err(priv->dev,
+				"Failed to create device link from source %s\n", sd->name);
+			return -EINVAL;
+		}
+
+		ret = v4l2_create_fwnode_links_to_pad(sd, &priv->pads[input->pad],
+						      MEDIA_LNK_FL_IMMUTABLE |
+						      MEDIA_LNK_FL_ENABLED);
+	} else {
+		link = device_link_add(sd->dev, priv->dev,
+				       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+		if (!link) {
+			dev_err(priv->dev,
+				"Failed to create device link to output %s\n", sd->name);
+			return -EINVAL;
+		}
+
+		ret = v4l2_create_fwnode_links_to_pad(&priv->subdev,
+						      &sd->entity.pads[0],
+						      MEDIA_LNK_FL_IMMUTABLE |
+						      MEDIA_LNK_FL_ENABLED);
+	}
+	if (ret)
+		dev_err(priv->dev, "Failed to create links between SENINF port %u and %s (%d)\n",
+			s_asd->port, sd->entity.name, ret);
+
+	return ret;
+}
+
+static int mtk_seninf_notifier_complete(struct v4l2_async_notifier *notifier)
+{
+	struct mtk_seninf *priv = container_of(notifier, struct mtk_seninf, notifier);
+	int ret;
+
+	ret = v4l2_device_register_subdev_nodes(&priv->v4l2_dev);
+	if (ret)
+		dev_err(priv->dev, "Failed to register subdev nodes: %d\n", ret);
+
+	return ret;
+}
+
+static const struct v4l2_async_notifier_operations mtk_seninf_async_ops = {
+	.bound = mtk_seninf_notifier_bound,
+	.complete = mtk_seninf_notifier_complete,
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe & Remove
+ */
+
+static int mtk_seninf_media_init(struct mtk_seninf *priv)
+{
+	struct media_pad *pads = priv->pads;
+	const struct mtk_seninf_conf *conf = priv->conf;
+	struct device *dev = priv->dev;
+	struct media_device *media_dev = &priv->media_dev;
+	u8 num_pads = conf->nb_outputs + conf->nb_inputs;
+	unsigned int i;
+	int ret;
+
+	media_dev->dev = dev;
+	strscpy(media_dev->model, conf->model, sizeof(media_dev->model));
+	snprintf(media_dev->bus_info, sizeof(media_dev->bus_info),
+		 "platform:%s", dev_name(dev));
+	media_dev->hw_revision = 0;
+	media_device_init(media_dev);
+
+	ret = media_entity_pads_init(&priv->subdev.entity, num_pads, pads);
+	if (ret)
+		goto err_clean_media;
+
+	for (i = 0; i < conf->nb_inputs; i++)
+		pads[i].flags = MEDIA_PAD_FL_SINK;
+	for (i = conf->nb_inputs; i < num_pads; i++)
+		pads[i].flags = MEDIA_PAD_FL_SOURCE;
+
+	return 0;
+err_clean_media:
+	media_device_cleanup(media_dev);
+
+	return ret;
+}
+
+static int mtk_seninf_v4l2_async_register(struct mtk_seninf *priv)
+{
+	struct device *dev = priv->dev;
+	const struct mtk_seninf_conf *conf = priv->conf;
+	int ret;
+	unsigned int i;
+
+	v4l2_async_nf_init(&priv->notifier);
+
+	for (i = 0; i < conf->nb_inputs + conf->nb_outputs; ++i) {
+		ret = mtk_seninf_fwnode_parse(dev, i);
+
+		if (ret) {
+			dev_err(dev, "Failed to parse endpoint at port %d, err: %d\n", i, ret);
+			goto err_clean_notififer;
+		}
+	}
+
+	priv->notifier.ops = &mtk_seninf_async_ops;
+	ret = v4l2_async_nf_register(&priv->v4l2_dev, &priv->notifier);
+	if (ret)
+		dev_err(dev, "Failed to register async notifier: %d\n", ret);
+	return 0;
+
+err_clean_notififer:
+	v4l2_async_nf_cleanup(&priv->notifier);
+
+	return ret;
+}
+
+static int mtk_seninf_v4l2_register(struct mtk_seninf *priv)
+{
+	struct v4l2_subdev *sd = &priv->subdev;
+	struct device *dev = priv->dev;
+	int ret;
+
+	/* Initialize media device & pads. */
+	ret = mtk_seninf_media_init(priv);
+	if (ret)
+		return ret;
+
+	/* Initialize & register v4l2 device. */
+	priv->v4l2_dev.mdev = &priv->media_dev;
+
+	ret = v4l2_device_register(dev, &priv->v4l2_dev);
+	if (ret) {
+		dev_err(dev, "Failed to register V4L2 device: %d\n", ret);
+		goto err_clean_media;
+	}
+
+	/* Initialize & register subdev. */
+	v4l2_subdev_init(sd, &seninf_subdev_ops);
+	sd->dev = dev;
+	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+	sd->entity.ops = &seninf_media_ops;
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS
+		  |  V4L2_SUBDEV_FL_STREAMS;
+	strscpy(sd->name, dev_name(dev), V4L2_SUBDEV_NAME_SIZE);
+	ret = seninf_initialize_controls(priv);
+	if (ret) {
+		dev_err(dev, "Failed to initialize controls: %d\n", ret);
+		goto err_unreg_v4l2;
+	}
+	v4l2_set_subdevdata(sd, priv);
+
+	ret = v4l2_subdev_init_finalize(sd);
+	if (ret)
+		goto err_free_handler;
+
+	ret = v4l2_device_register_subdev(&priv->v4l2_dev, sd);
+	if (ret) {
+		dev_err(dev, "Failed to register subdev: %d\n", ret);
+		goto err_cleanup_subdev;
+	}
+
+	/* Set up async device */
+	ret = mtk_seninf_v4l2_async_register(priv);
+	if (ret) {
+		dev_err(dev, "Failed to register v4l2 async notifier: %d\n", ret);
+		goto err_unreg_subdev;
+	}
+
+	/* Register media device */
+	ret = media_device_register(&priv->media_dev);
+	if (ret) {
+		dev_err(dev, "failed to register media device: %d\n", ret);
+		goto err_unreg_notifier;
+	}
+
+	return 0;
+
+err_unreg_notifier:
+	v4l2_async_nf_unregister(&priv->notifier);
+err_unreg_subdev:
+	v4l2_device_unregister_subdev(sd);
+err_cleanup_subdev:
+	v4l2_subdev_cleanup(sd);
+err_free_handler:
+	v4l2_ctrl_handler_free(&priv->ctrl_handler);
+err_unreg_v4l2:
+	v4l2_device_unregister(&priv->v4l2_dev);
+err_clean_media:
+	media_entity_cleanup(&sd->entity);
+	media_device_cleanup(&priv->media_dev);
+
+	return ret;
+}
+
+static int seninf_probe(struct platform_device *pdev)
+{
+	/* List of clocks required by seninf. */
+	static const char * const clk_names[] = {
+		"camsys", "top_mux"
+	};
+
+	struct mtk_seninf *priv;
+	struct device *dev = &pdev->dev;
+	unsigned int i;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(struct mtk_seninf), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->conf = of_device_get_match_data(dev);
+
+	dev_set_drvdata(dev, priv);
+	priv->dev = dev;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->num_clks = ARRAY_SIZE(clk_names);
+	priv->clks = devm_kcalloc(dev, priv->num_clks,
+				  sizeof(*priv->clks), GFP_KERNEL);
+	if (!priv->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < priv->num_clks; ++i)
+		priv->clks[i].id = clk_names[i];
+
+	ret = devm_clk_bulk_get(dev, priv->num_clks, priv->clks);
+	if (ret) {
+		dev_err(dev, "failed to get seninf clock:%d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < priv->conf->nb_muxes; ++i) {
+		struct mtk_seninf_mux *mux = &priv->muxes[i];
+
+		mux->pad = priv->conf->nb_inputs + i;
+		mux->mux_id = i;
+		mux->base = priv->base + 0x1000 * i;
+		mux->seninf = priv;
+	}
+
+	ret = mtk_seninf_v4l2_register(priv);
+	if (!ret)
+		pm_runtime_enable(dev);
+
+	return ret;
+}
+
+static int seninf_pm_suspend(struct device *dev)
+{
+	struct mtk_seninf *priv = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "seninf runtime suspend\n");
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+
+	return 0;
+}
+
+static int seninf_pm_resume(struct device *dev)
+{
+	struct mtk_seninf *priv = dev_get_drvdata(dev);
+	int ret;
+
+	dev_dbg(dev, "seninf runtime resume\n");
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+	if (ret) {
+		dev_err(dev, "failed to enable clock:%d\n", ret);
+		return ret;
+	}
+
+	mtk_seninf_csi2_setup_phy(priv);
+
+	return 0;
+}
+
+static const struct dev_pm_ops runtime_pm_ops = {
+	SET_RUNTIME_PM_OPS(seninf_pm_suspend, seninf_pm_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+};
+
+static int seninf_remove(struct platform_device *pdev)
+{
+	struct mtk_seninf *priv = dev_get_drvdata(&pdev->dev);
+
+	media_device_unregister(&priv->media_dev);
+	media_device_cleanup(&priv->media_dev);
+	v4l2_async_nf_unregister(&priv->notifier);
+	v4l2_async_nf_cleanup(&priv->notifier);
+	v4l2_device_unregister_subdev(&priv->subdev);
+	v4l2_subdev_cleanup(&priv->subdev);
+	v4l2_ctrl_handler_free(&priv->ctrl_handler);
+	media_entity_cleanup(&priv->subdev.entity);
+	v4l2_device_unregister(&priv->v4l2_dev);
+
+	pm_runtime_disable(priv->dev);
+
+	return 0;
+}
+
+static const struct mtk_seninf_conf seninf_8365_conf = {
+	.model = "mtk-camsys-3.0",
+	.nb_inputs = 4,
+	.nb_muxes = 6,
+	.nb_outputs = 4,
+};
+
+static const struct of_device_id mtk_seninf_of_match[] = {
+	{
+		.compatible = "mediatek,mt8365-seninf",
+		.data = &seninf_8365_conf,
+	},
+	{
+	},
+};
+MODULE_DEVICE_TABLE(of, mtk_seninf_of_match);
+
+static struct platform_driver seninf_pdrv = {
+	.driver	= {
+		.name	= "mtk-seninf",
+		.pm  = &runtime_pm_ops,
+		.of_match_table = mtk_seninf_of_match,
+	},
+	.probe	= seninf_probe,
+	.remove	= seninf_remove,
+};
+
+module_platform_driver(seninf_pdrv);
+
+MODULE_DESCRIPTION("MTK sensor interface driver");
+MODULE_AUTHOR("Louis Kuo <louis.kuo@mediatek.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h
new file mode 100644
index 000000000000..b6af8567fa20
--- /dev/null
+++ b/drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h
@@ -0,0 +1,99 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ */
+
+#ifndef __SENINF_REG_H__
+#define __SENINF_REG_H__
+
+#include <linux/bits.h>
+
+#define SENINF_TOP_CTRL							0x0000
+#define SENINF_TOP_CTRL_MUX_LP_MODE					BIT(31)
+#define SENINF_TOP_CTRL_SENINF_PCLK_EN					BIT(10)
+#define SENINF_TOP_CTRL_SENINF2_PCLK_EN					BIT(11)
+#define SENINF_TOP_MUX_CTRL						0x0008
+#define SENINF_TOP_CAM_MUX_CTRL						0x0010
+#define SENINF_TOP_PHY_SENINF_CTL_CSI0					0x001c
+#define SENINF_TOP_PHY_SENINF_CTL_CSI0_DPHY_MODE			BIT(0)
+#define SENINF_TOP_PHY_SENINF_CTL_CSI0_CK_SEL_1				GENMASK(10, 8)
+#define SENINF_TOP_PHY_SENINF_CTL_CSI0_CK_SEL_2				GENMASK(13, 12)
+#define SENINF_TOP_PHY_SENINF_CTL_CSI0_PHY_SENINF_LANE_MUX_CSI0_EN	BIT(31)
+#define SENINF_TOP_PHY_SENINF_CTL_CSI1					0x0020
+#define SENINF_TOP_PHY_SENINF_CTL_CSI1_DPHY_MODE			BIT(0)
+#define SENINF_TOP_PHY_SENINF_CTL_CSI1_CK_SEL_1				GENMASK(10, 8)
+#define SENINF_TOP_PHY_SENINF_CTL_CSI1_PHY_SENINF_LANE_MUX_CSI1_EN	BIT(31)
+#define SENINF_CTRL							0x0200
+#define SENINF_CTRL_SENINF_EN						BIT(0)
+#define SENINF_CTRL_CSI2_SW_RST						BIT(7)
+#define SENINF_CTRL_SENINF_SRC_SEL					GENMASK(14, 12)
+#define SENINF_CTRL_PAD2CAM_DATA_SEL					GENMASK(30, 28)
+#define SENINF_CTRL_EXT							0x0204
+#define SENINF_CTRL_EXT_SENINF_TESTMDL_IP_EN				BIT(1)
+#define SENINF_CTRL_EXT_SENINF_NCSI2_IP_EN				BIT(5)
+#define SENINF_CTRL_EXT_SENINF_CSI2_IP_EN				BIT(6)
+#define SENINF_TG1_PH_CNT						0x0600
+#define SENINF_TG1_SEN_CK						0x0604
+#define SENINF_TG1_TM_CTL						0x0608
+#define SENINF_TG1_TM_CTL_TM_EN						BIT(0)
+#define SENINF_TG1_TM_CTL_TM_FMT					BIT(2)
+#define SENINF_TG1_TM_CTL_TM_PAT					GENMASK(7, 4)
+#define SENINF_TG1_TM_CTL_TM_VSYNC					GENMASK(15, 8)
+#define SENINF_TG1_TM_CTL_TM_DUMMYPXL					GENMASK(23, 16)
+#define SENINF_TG1_TM_SIZE						0x060c
+#define SENINF_TG1_TM_CLK						0x0610
+#define SENINF_TG1_TM_STP						0x0614
+#define MIPI_RX_CON24_CSI0						0x0824
+#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN0_MUX				GENMASK(25, 24)
+#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN1_MUX				GENMASK(27, 26)
+#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN2_MUX				GENMASK(29, 28)
+#define MIPI_RX_CON24_CSI0_CSI0_BIST_LN3_MUX				GENMASK(31, 30)
+#define SENINF_CSI2_CTL							0x0a00
+#define SENINF_CSI2_CTL_DATA_LANE0_EN					BIT(0)
+#define SENINF_CSI2_CTL_DATA_LANE1_EN					BIT(1)
+#define SENINF_CSI2_CTL_DATA_LANE2_EN					BIT(2)
+#define SENINF_CSI2_CTL_DATA_LANE3_EN					BIT(3)
+#define SENINF_CSI2_CTL_CLOCK_LANE_EN					BIT(4)
+#define SENINF_CSI2_CTL_HSRX_DET_EN					BIT(7)
+#define SENINF_CSI2_CTL_HS_TRAIL_EN					BIT(25)
+#define SENINF_CSI2_CTL_CLOCK_HS_OPTION					BIT(27)
+#define SENINF_CSI2_LNRD_TIMING						0x0a08
+#define SENINF_CSI2_LNRD_TIMING_DATA_SETTLE_PARAMETER			GENMASK(15, 8)
+#define SENINF_CSI2_DPCM						0x0a0c
+#define SENINF_CSI2_INT_EN						0x0a10
+#define SENINF_CSI2_INT_STATUS						0x0a14
+#define SENINF_CSI2_DGB_SEL						0x0a18
+#define SENINF_CSI2_DGB_SEL_DEBUG_SEL					GENMASK(7, 0)
+#define SENINF_CSI2_DGB_SEL_DEBUG_EN					BIT(31)
+#define SENINF_CSI2_SPARE0						0x0a20
+#define SENINF_CSI2_LNRC_FSM						0x0a28
+#define SENINF_CSI2_HS_TRAIL						0x0a40
+#define SENINF_CSI2_HS_TRAIL_HS_TRAIL_PARAMETER				GENMASK(7, 0)
+#define SENINF_CSI2_RESYNC_MERGE_CTL					0x0a74
+#define SENINF_CSI2_RESYNC_MERGE_CTL_CPHY_LANE_RESYNC_CNT		GENMASK(2, 0)
+#define SENINF_CSI2_RESYNC_MERGE_CTL_BYPASS_LANE_RESYNC			BIT(10)
+#define SENINF_CSI2_RESYNC_MERGE_CTL_CDPHY_SEL				BIT(11)
+#define SENINF_CSI2_MODE						0x0ae8
+#define SENINF_CSI2_MODE_CSR_CSI2_MODE					GENMASK(7, 0)
+#define SENINF_CSI2_MODE_CSR_CSI2_HEADER_LEN				GENMASK(10, 8)
+#define SENINF_CSI2_DPHY_SYNC						0x0b20
+#define SENINF_CSI2_DPHY_SYNC_SYNC_SEQ_MASK_0				GENMASK(15, 0)
+#define SENINF_CSI2_DPHY_SYNC_SYNC_SEQ_PAT_0				GENMASK(31, 16)
+#define SENINF_MUX_CTRL							0x0d00
+#define SENINF_MUX_CTRL_SENINF_MUX_SW_RST				BIT(0)
+#define SENINF_MUX_CTRL_SENINF_IRQ_SW_RST				BIT(1)
+#define SENINF_MUX_CTRL_SENINF_HSYNC_MASK				BIT(7)
+#define SENINF_MUX_CTRL_SENINF_PIX_SEL					BIT(8)
+#define SENINF_MUX_CTRL_SENINF_VSYNC_POL				BIT(9)
+#define SENINF_MUX_CTRL_SENINF_HSYNC_POL				BIT(10)
+#define SENINF_MUX_CTRL_SENINF_SRC_SEL					GENMASK(15, 12)
+#define SENINF_MUX_CTRL_FIFO_PUSH_EN					GENMASK(21, 16)
+#define SENINF_MUX_CTRL_FIFO_FLUSH_EN					GENMASK(28, 22)
+#define SENINF_MUX_CTRL_FIFO_FULL_WR_EN					GENMASK(29, 28)
+#define SENINF_MUX_CTRL_SENINF_MUX_EN					BIT(31)
+#define SENINF_MUX_INTEN						0x0d04
+#define SENINF_MUX_SPARE						0x0d2c
+#define SENINF_MUX_CTRL_EXT						0x0d3c
+#define SENINF_MUX_CTRL_EXT_SENINF_SRC_SEL_EXT				GENMASK(1, 0)
+#define SENINF_MUX_CTRL_EXT_SENINF_PIX_SEL_EXT				BIT(4)
+#endif