diff mbox series

[v3,4/6] thermal/drivers/mediatek/lvts_thermal: Disable undesired interrupts

Message ID 20230706153823.201943-5-nfraprado@collabora.com
State Accepted
Commit 487bf099e85b724c824f5fafaf93c6749c4d2120
Headers show
Series [v3,1/6] thermal/drivers/mediatek/lvts_thermal: Handle IRQ on all controllers | expand

Commit Message

Nícolas F. R. A. Prado July 6, 2023, 3:37 p.m. UTC
Out of the many interrupts supported by the hardware, the only ones of
interest to the driver currently are:
* The temperature went over the high offset threshold, for any of the
  sensors
* The temperature went below the low offset threshold, for any of the
  sensors
* The temperature went over the stage3 threshold

These are the only thresholds configured by the driver through the
OFFSETH, OFFSETL, and PROTTC registers, respectively.

The current interrupt mask in LVTS_MONINT_CONF, enables many more
interrupts, including data ready on sensors for both filtered and
immediate mode. These are not only not handled by the driver, but they
are also triggered too often, causing unneeded overhead. Disable these
unnecessary interrupts.

The meaning of each bit can be seen in the comment describing
LVTS_MONINTST in the IRQ handler.

Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

---

(no changes since v2)

Changes in v2:
- Reworded commit and changed flag to use offset interrupts instead

 drivers/thermal/mediatek/lvts_thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

AngeloGioacchino Del Regno July 7, 2023, 8:21 a.m. UTC | #1
Il 06/07/23 17:37, Nícolas F. R. A. Prado ha scritto:
> Out of the many interrupts supported by the hardware, the only ones of
> interest to the driver currently are:
> * The temperature went over the high offset threshold, for any of the
>    sensors
> * The temperature went below the low offset threshold, for any of the
>    sensors
> * The temperature went over the stage3 threshold
> 
> These are the only thresholds configured by the driver through the
> OFFSETH, OFFSETL, and PROTTC registers, respectively.
> 
> The current interrupt mask in LVTS_MONINT_CONF, enables many more
> interrupts, including data ready on sensors for both filtered and
> immediate mode. These are not only not handled by the driver, but they
> are also triggered too often, causing unneeded overhead. Disable these
> unnecessary interrupts.
> 
> The meaning of each bit can be seen in the comment describing
> LVTS_MONINTST in the IRQ handler.
> 
> Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> 

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Alexandre Mergnat July 7, 2023, 1:58 p.m. UTC | #2
On 06/07/2023 17:37, Nícolas F. R. A. Prado wrote:
> Out of the many interrupts supported by the hardware, the only ones of
> interest to the driver currently are:
> * The temperature went over the high offset threshold, for any of the
>    sensors
> * The temperature went below the low offset threshold, for any of the
>    sensors
> * The temperature went over the stage3 threshold
> 
> These are the only thresholds configured by the driver through the
> OFFSETH, OFFSETL, and PROTTC registers, respectively.
> 
> The current interrupt mask in LVTS_MONINT_CONF, enables many more
> interrupts, including data ready on sensors for both filtered and
> immediate mode. These are not only not handled by the driver, but they
> are also triggered too often, causing unneeded overhead. Disable these
> unnecessary interrupts.
> 
> The meaning of each bit can be seen in the comment describing
> LVTS_MONINTST in the IRQ handler.

Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
diff mbox series

Patch

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index e7cbfe0426b5..e6dd4d120e54 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -65,7 +65,7 @@ 
 #define LVTS_HW_FILTER				0x2
 #define LVTS_TSSEL_CONF				0x13121110
 #define LVTS_CALSCALE_CONF			0x300
-#define LVTS_MONINT_CONF			0x9FBF7BDE
+#define LVTS_MONINT_CONF			0x8300318C
 
 #define LVTS_INT_SENSOR0			0x0009001F
 #define LVTS_INT_SENSOR1			0x001203E0