diff mbox series

[v3,1/6] thermal/drivers/mediatek/lvts_thermal: Handle IRQ on all controllers

Message ID 20230706153823.201943-2-nfraprado@collabora.com
State Accepted
Commit cbd8c5aae2a988bafd4586bea710eeddc30a82ce
Headers show
Series [v3,1/6] thermal/drivers/mediatek/lvts_thermal: Handle IRQ on all controllers | expand

Commit Message

Nícolas F. R. A. Prado July 6, 2023, 3:37 p.m. UTC
There is a single IRQ handler for each LVTS thermal domain, and it is
supposed to check each of its underlying controllers for the origin of
the interrupt and clear its status. However due to a typo, only the
first controller was ever being handled, which resulted in the interrupt
never being cleared when it happened on the other controllers. Add the
missing index so interrupts are handled for all controllers.

Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

---

(no changes since v1)

 drivers/thermal/mediatek/lvts_thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Alexandre Mergnat July 7, 2023, 1:46 p.m. UTC | #1
On 06/07/2023 17:37, Nícolas F. R. A. Prado wrote:
> There is a single IRQ handler for each LVTS thermal domain, and it is
> supposed to check each of its underlying controllers for the origin of
> the interrupt and clear its status. However due to a typo, only the
> first controller was ever being handled, which resulted in the interrupt
> never being cleared when it happened on the other controllers. Add the
> missing index so interrupts are handled for all controllers.

Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
diff mbox series

Patch

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 1e11defe4f35..ba8f86ee12b6 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -451,7 +451,7 @@  static irqreturn_t lvts_irq_handler(int irq, void *data)
 
 	for (i = 0; i < lvts_td->num_lvts_ctrl; i++) {
 
-		aux = lvts_ctrl_irq_handler(lvts_td->lvts_ctrl);
+		aux = lvts_ctrl_irq_handler(&lvts_td->lvts_ctrl[i]);
 		if (aux != IRQ_HANDLED)
 			continue;