| Message ID | 20230708112647.2897294-1-a.fatoum@pengutronix.de |
|---|---|
| State | Accepted |
| Commit | 4afcb58ea47e66c025d2b0a5f091dce5aaf95b0f |
| Headers | show |
| Series | thermal: imx8mm: suppress log message on probe deferral | expand |
On 7/8/23 13:26, Ahmad Fatoum wrote: > nvmem_cell_read_u32() may return -EPROBE_DEFER if NVMEM supplier has not > yet been probed. Future reprobe may succeed, so printing: > > i.mx8mm_thermal 30260000.tmu: Failed to read OCOTP nvmem cell (-517). > > to the log is confusing. Fix this by using dev_err_probe. This also > elevates the message from warning to error, which is more correct: The > log message is only ever printed in probe error path and probe aborts > afterwards, so it really warrants an error-level message. > > Fixes: 403291648823 ("thermal/drivers/imx: Add support for loading calibration data from OCOTP") > Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Marek Vasut <marex@denx.de> Thanks
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c index d8005e9ec992..1f780c4a1c89 100644 --- a/drivers/thermal/imx8mm_thermal.c +++ b/drivers/thermal/imx8mm_thermal.c @@ -179,10 +179,8 @@ static int imx8mm_tmu_probe_set_calib_v1(struct platform_device *pdev, int ret; ret = nvmem_cell_read_u32(&pdev->dev, "calib", &ana0); - if (ret) { - dev_warn(dev, "Failed to read OCOTP nvmem cell (%d).\n", ret); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "Failed to read OCOTP nvmem cell\n"); writel(FIELD_PREP(TASR_BUF_VREF_MASK, FIELD_GET(ANA0_BUF_VREF_MASK, ana0)) |
nvmem_cell_read_u32() may return -EPROBE_DEFER if NVMEM supplier has not yet been probed. Future reprobe may succeed, so printing: i.mx8mm_thermal 30260000.tmu: Failed to read OCOTP nvmem cell (-517). to the log is confusing. Fix this by using dev_err_probe. This also elevates the message from warning to error, which is more correct: The log message is only ever printed in probe error path and probe aborts afterwards, so it really warrants an error-level message. Fixes: 403291648823 ("thermal/drivers/imx: Add support for loading calibration data from OCOTP") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> --- drivers/thermal/imx8mm_thermal.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)