@@ -17,6 +17,9 @@
#include <linux/usb/role.h>
#include <linux/usb/tcpm.h>
#include <linux/usb/typec_mux.h>
+
+#include <drm/drm_bridge.h>
+
#include "qcom_pmic_typec_pdphy.h"
#include "qcom_pmic_typec_port.h"
@@ -33,6 +36,7 @@ struct pmic_typec {
struct pmic_typec_port *pmic_typec_port;
bool vbus_enabled;
struct mutex lock; /* VBUS state serialization */
+ struct drm_bridge bridge;
};
#define tcpc_to_tcpm(_tcpc_) container_of(_tcpc_, struct pmic_typec, tcpc)
@@ -146,6 +150,16 @@ static int qcom_pmic_typec_init(struct tcpc_dev *tcpc)
return 0;
}
+static int qcom_pmic_typec_attach(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
+{
+ return flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR ? 0 : -EINVAL;
+}
+
+static const struct drm_bridge_funcs qcom_pmic_typec_bridge_funcs = {
+ .attach = qcom_pmic_typec_attach,
+};
+
static int qcom_pmic_typec_probe(struct platform_device *pdev)
{
struct pmic_typec *tcpm;
@@ -208,6 +222,17 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
mutex_init(&tcpm->lock);
platform_set_drvdata(pdev, tcpm);
+ tcpm->bridge.funcs = &qcom_pmic_typec_bridge_funcs;
+#if CONFIG_OF
+ tcpm->bridge.of_node = of_get_child_by_name(dev->of_node, "connector");
+#endif
+ tcpm->bridge.ops = DRM_BRIDGE_OP_HPD;
+ tcpm->bridge.type = DRM_MODE_CONNECTOR_USB;
+
+ ret = devm_drm_bridge_add(dev, &tcpm->bridge);
+ if (ret)
+ return ret;
+
tcpm->tcpc.fwnode = device_get_named_child_node(tcpm->dev, "connector");
if (IS_ERR(tcpm->tcpc.fwnode))
return PTR_ERR(tcpm->tcpc.fwnode);
The current approach to handling DP on bridge-enabled platforms requires a chain of DP bridges up to the USB-C connector. Register a last DRM bridge for such chain. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+)