diff mbox series

[v2,13/15] spi: Rename SPI_MASTER_GPIO_SS to SPI_CONTROLLER_GPIO_SS

Message ID 20230710154932.68377-14-andriy.shevchenko@linux.intel.com
State Superseded
Headers show
Series spi: Header and core clean up and refactoring | expand

Commit Message

Andy Shevchenko July 10, 2023, 3:49 p.m. UTC
Rename SPI_MASTER_GPIO_SS to SPI_CONTROLLER_GPIO_SS and
convert the users to SPI_CONTROLLER_GPIO_SS to follow
the new naming shema.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/spi/spi-ath79.c    | 2 +-
 drivers/spi/spi-atmel.c    | 2 +-
 drivers/spi/spi-bitbang.c  | 6 +++---
 drivers/spi/spi-davinci.c  | 2 +-
 drivers/spi/spi-dw-core.c  | 2 +-
 drivers/spi/spi-gpio.c     | 2 +-
 drivers/spi/spi-imx.c      | 2 +-
 drivers/spi/spi-orion.c    | 2 +-
 drivers/spi/spi-rockchip.c | 2 +-
 drivers/spi/spi-sifive.c   | 2 +-
 drivers/spi/spi.c          | 4 ++--
 include/linux/spi/spi.h    | 3 +--
 12 files changed, 15 insertions(+), 16 deletions(-)

Comments

Serge Semin July 11, 2023, 12:30 p.m. UTC | #1
On Mon, Jul 10, 2023 at 06:49:30PM +0300, Andy Shevchenko wrote:
> Rename SPI_MASTER_GPIO_SS to SPI_CONTROLLER_GPIO_SS and
> convert the users to SPI_CONTROLLER_GPIO_SS to follow

* I'm not an expert in English, but imo the next would look a
* bit more readable:
* convert s/the users to SPI_CONTROLLER_GPIO_SS/the code to using SPI_CONTROLLER_GPIO_SS

> the new naming shema.

s/shema/schema

> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
[...]

>  drivers/spi/spi-dw-core.c  | 2 +-

[...]

> diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
> index a8ba41ad4541..45f5acc26b1d 100644
> --- a/drivers/spi/spi-dw-core.c
> +++ b/drivers/spi/spi-dw-core.c
> @@ -932,7 +932,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
>  	if (dws->mem_ops.exec_op)
>  		master->mem_ops = &dws->mem_ops;
>  	master->max_speed_hz = dws->max_freq;
> -	master->flags = SPI_MASTER_GPIO_SS;
> +	master->flags = SPI_CONTROLLER_GPIO_SS;
>  	master->auto_runtime_pm = true;
>  
>  	/* Get default rx sample delay */

For the DW APB/AHB SSI driver:
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>

-Serge(y)

[...]

> diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
> index 06a92a3a5746..bcabae98cb7c 100644
> --- a/drivers/spi/spi.c
> +++ b/drivers/spi/spi.c
> @@ -995,7 +995,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
>  				gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), activate);
>  		}
>  		/* Some SPI masters need both GPIO CS & slave_select */
> -		if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
> +		if ((spi->controller->flags & SPI_CONTROLLER_GPIO_SS) &&
>  		    spi->controller->set_cs)
>  			spi->controller->set_cs(spi, !enable);
>  	} else if (spi->controller->set_cs) {
> @@ -3020,7 +3020,7 @@ static int spi_get_gpio_descs(struct spi_controller *ctlr)
>  
>  	ctlr->unused_native_cs = ffs(~native_cs_mask) - 1;
>  
> -	if ((ctlr->flags & SPI_MASTER_GPIO_SS) && num_cs_gpios &&
> +	if ((ctlr->flags & SPI_CONTROLLER_GPIO_SS) && num_cs_gpios &&
>  	    ctlr->max_native_cs && ctlr->unused_native_cs >= ctlr->max_native_cs) {
>  		dev_err(dev, "No unused native chip select available\n");
>  		return -EINVAL;
> diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
> index cdc3addfe117..43f6c3f71a76 100644
> --- a/include/linux/spi/spi.h
> +++ b/include/linux/spi/spi.h
> @@ -578,8 +578,7 @@ struct spi_controller {
>  #define SPI_CONTROLLER_NO_TX		BIT(2)	/* Can't do buffer write */
>  #define SPI_CONTROLLER_MUST_RX		BIT(3)	/* Requires rx */
>  #define SPI_CONTROLLER_MUST_TX		BIT(4)	/* Requires tx */
> -
> -#define SPI_MASTER_GPIO_SS		BIT(5)	/* GPIO CS must select slave */
> +#define SPI_CONTROLLER_GPIO_SS		BIT(5)	/* GPIO CS must select slave */
>  
>  	/* Flag indicating if the allocation of this struct is devres-managed */
>  	bool			devm_allocated;
> -- 
> 2.40.0.1.gaa8946217a0b
>
Andy Shevchenko July 11, 2023, 12:49 p.m. UTC | #2
On Tue, Jul 11, 2023 at 03:30:19PM +0300, Serge Semin wrote:
> On Mon, Jul 10, 2023 at 06:49:30PM +0300, Andy Shevchenko wrote:
> > Rename SPI_MASTER_GPIO_SS to SPI_CONTROLLER_GPIO_SS and
> > convert the users to SPI_CONTROLLER_GPIO_SS to follow
> 
> * I'm not an expert in English, but imo the next would look a
> * bit more readable:
> * convert s/the users to SPI_CONTROLLER_GPIO_SS/the code to using SPI_CONTROLLER_GPIO_SS

> > the new naming shema.
> 
> s/shema/schema

Right, thank you!

...

> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>

Thank you for the review!
diff mbox series

Patch

diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index d3dd21386f12..1b6d977d111c 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -185,7 +185,7 @@  static int ath79_spi_probe(struct platform_device *pdev)
 
 	host->use_gpio_descriptors = true;
 	host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
-	host->flags = SPI_MASTER_GPIO_SS;
+	host->flags = SPI_CONTROLLER_GPIO_SS;
 	host->num_chipselect = 3;
 	host->mem_ops = &ath79_mem_ops;
 
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 0865993005b2..9674499ed0a6 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -1476,7 +1476,7 @@  static int atmel_spi_probe(struct platform_device *pdev)
 	host->num_chipselect = 4;
 	host->setup = atmel_spi_setup;
 	host->flags = (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX |
-			SPI_MASTER_GPIO_SS);
+			SPI_CONTROLLER_GPIO_SS);
 	host->transfer_one = atmel_spi_one_transfer;
 	host->set_cs = atmel_spi_set_cs;
 	host->cleanup = atmel_spi_cleanup;
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index 862f209cada1..ecd44016c197 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -349,11 +349,11 @@  int spi_bitbang_init(struct spi_bitbang *bitbang)
 	/*
 	 * We only need the chipselect callback if we are actually using it.
 	 * If we just use GPIO descriptors, it is surplus. If the
-	 * SPI_MASTER_GPIO_SS flag is set, we always need to call the
+	 * SPI_CONTROLLER_GPIO_SS flag is set, we always need to call the
 	 * driver-specific chipselect routine.
 	 */
 	custom_cs = (!master->use_gpio_descriptors ||
-		     (master->flags & SPI_MASTER_GPIO_SS));
+		     (master->flags & SPI_CONTROLLER_GPIO_SS));
 
 	if (custom_cs && !bitbang->chipselect)
 		return -EINVAL;
@@ -371,7 +371,7 @@  int spi_bitbang_init(struct spi_bitbang *bitbang)
 	master->transfer_one = spi_bitbang_transfer_one;
 	/*
 	 * When using GPIO descriptors, the ->set_cs() callback doesn't even
-	 * get called unless SPI_MASTER_GPIO_SS is set.
+	 * get called unless SPI_CONTROLLER_GPIO_SS is set.
 	 */
 	if (custom_cs)
 		master->set_cs = spi_bitbang_set_cs;
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 014392459d5e..7ea2ac053052 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -939,7 +939,7 @@  static int davinci_spi_probe(struct platform_device *pdev)
 	master->bus_num = pdev->id;
 	master->num_chipselect = pdata->num_chipselect;
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
-	master->flags = SPI_CONTROLLER_MUST_RX | SPI_MASTER_GPIO_SS;
+	master->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_GPIO_SS;
 	master->setup = davinci_spi_setup;
 	master->cleanup = davinci_spi_cleanup;
 	master->can_dma = davinci_spi_can_dma;
diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index a8ba41ad4541..45f5acc26b1d 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -932,7 +932,7 @@  int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 	if (dws->mem_ops.exec_op)
 		master->mem_ops = &dws->mem_ops;
 	master->max_speed_hz = dws->max_freq;
-	master->flags = SPI_MASTER_GPIO_SS;
+	master->flags = SPI_CONTROLLER_GPIO_SS;
 	master->auto_runtime_pm = true;
 
 	/* Get default rx sample delay */
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 85e149ec2910..612db477ad12 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -434,7 +434,7 @@  static int spi_gpio_probe(struct platform_device *pdev)
 	 * line, that we need to do on selection. This makes the local
 	 * callback for chipselect always get called.
 	 */
-	master->flags |= SPI_MASTER_GPIO_SS;
+	master->flags |= SPI_CONTROLLER_GPIO_SS;
 	bb->chipselect = spi_gpio_chipselect;
 	bb->set_line_direction = spi_gpio_set_direction;
 
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 528ae46c087f..8d97f2b32c2b 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1779,7 +1779,7 @@  static int spi_imx_probe(struct platform_device *pdev)
 
 	if (is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx)) {
 		controller->max_native_cs = 4;
-		controller->flags |= SPI_MASTER_GPIO_SS;
+		controller->flags |= SPI_CONTROLLER_GPIO_SS;
 	}
 
 	spi_imx->spi_drctl = spi_drctl;
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index ad9e83e34297..4882aafd0505 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -677,7 +677,7 @@  static int orion_spi_probe(struct platform_device *pdev)
 	master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
 	master->auto_runtime_pm = true;
 	master->use_gpio_descriptors = true;
-	master->flags = SPI_MASTER_GPIO_SS;
+	master->flags = SPI_CONTROLLER_GPIO_SS;
 
 	platform_set_drvdata(pdev, master);
 
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 143ede958ac1..a37943847e81 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -858,7 +858,7 @@  static int rockchip_spi_probe(struct platform_device *pdev)
 		ctlr->mode_bits |= SPI_NO_CS;
 		ctlr->slave_abort = rockchip_spi_slave_abort;
 	} else {
-		ctlr->flags = SPI_MASTER_GPIO_SS;
+		ctlr->flags = SPI_CONTROLLER_GPIO_SS;
 		ctlr->max_native_cs = ROCKCHIP_SPI_MAX_CS_NUM;
 		/*
 		 * rk spi0 has two native cs, spi1..5 one cs only
diff --git a/drivers/spi/spi-sifive.c b/drivers/spi/spi-sifive.c
index dae9e097c333..2f77dae85386 100644
--- a/drivers/spi/spi-sifive.c
+++ b/drivers/spi/spi-sifive.c
@@ -379,7 +379,7 @@  static int sifive_spi_probe(struct platform_device *pdev)
 	 * we need to "left-align" the bits (unless SPI_LSB_FIRST)
 	 */
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
-	master->flags = SPI_CONTROLLER_MUST_TX | SPI_MASTER_GPIO_SS;
+	master->flags = SPI_CONTROLLER_MUST_TX | SPI_CONTROLLER_GPIO_SS;
 	master->prepare_message = sifive_spi_prepare_message;
 	master->set_cs = sifive_spi_set_cs;
 	master->transfer_one = sifive_spi_transfer_one;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 06a92a3a5746..bcabae98cb7c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -995,7 +995,7 @@  static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
 				gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), activate);
 		}
 		/* Some SPI masters need both GPIO CS & slave_select */
-		if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
+		if ((spi->controller->flags & SPI_CONTROLLER_GPIO_SS) &&
 		    spi->controller->set_cs)
 			spi->controller->set_cs(spi, !enable);
 	} else if (spi->controller->set_cs) {
@@ -3020,7 +3020,7 @@  static int spi_get_gpio_descs(struct spi_controller *ctlr)
 
 	ctlr->unused_native_cs = ffs(~native_cs_mask) - 1;
 
-	if ((ctlr->flags & SPI_MASTER_GPIO_SS) && num_cs_gpios &&
+	if ((ctlr->flags & SPI_CONTROLLER_GPIO_SS) && num_cs_gpios &&
 	    ctlr->max_native_cs && ctlr->unused_native_cs >= ctlr->max_native_cs) {
 		dev_err(dev, "No unused native chip select available\n");
 		return -EINVAL;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index cdc3addfe117..43f6c3f71a76 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -578,8 +578,7 @@  struct spi_controller {
 #define SPI_CONTROLLER_NO_TX		BIT(2)	/* Can't do buffer write */
 #define SPI_CONTROLLER_MUST_RX		BIT(3)	/* Requires rx */
 #define SPI_CONTROLLER_MUST_TX		BIT(4)	/* Requires tx */
-
-#define SPI_MASTER_GPIO_SS		BIT(5)	/* GPIO CS must select slave */
+#define SPI_CONTROLLER_GPIO_SS		BIT(5)	/* GPIO CS must select slave */
 
 	/* Flag indicating if the allocation of this struct is devres-managed */
 	bool			devm_allocated;