diff mbox series

[1/2] tty: serial: fsl_lpuart: move the lpuart32_int() below

Message ID 20230710013857.7396-2-sherry.sun@nxp.com
State New
Headers show
Series fsl_lpuart: Add IDLE interrupt support for rx_dma on imx7ulp/imx8ulp/imx8qxp | expand

Commit Message

Sherry Sun July 10, 2023, 1:38 a.m. UTC 
Move the lpuart32_int() below lpuart_copy_rx_to_tty(), this is a
preparation patch for the next patch to avoid the function declaration,
no actual functional changes.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 drivers/tty/serial/fsl_lpuart.c | 39 ++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 6c652d77f566..653cf8eb5a72 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1066,26 +1066,6 @@  static irqreturn_t lpuart_int(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t lpuart32_int(int irq, void *dev_id)
-{
-	struct lpuart_port *sport = dev_id;
-	unsigned long sts, rxcount;
-
-	sts = lpuart32_read(&sport->port, UARTSTAT);
-	rxcount = lpuart32_read(&sport->port, UARTWATER);
-	rxcount = rxcount >> UARTWATER_RXCNT_OFF;
-
-	if ((sts & UARTSTAT_RDRF || rxcount > 0) && !sport->lpuart_dma_rx_use)
-		lpuart32_rxint(sport);
-
-	if ((sts & UARTSTAT_TDRE) && !sport->lpuart_dma_tx_use)
-		lpuart32_txint(sport);
-
-	lpuart32_write(&sport->port, sts, UARTSTAT);
-	return IRQ_HANDLED;
-}
-
-
 static inline void lpuart_handle_sysrq_chars(struct uart_port *port,
 					     unsigned char *p, int count)
 {
@@ -1278,6 +1258,25 @@  static void lpuart_dma_rx_complete(void *arg)
 	lpuart_copy_rx_to_tty(sport);
 }
 
+static irqreturn_t lpuart32_int(int irq, void *dev_id)
+{
+	struct lpuart_port *sport = dev_id;
+	unsigned long sts, rxcount;
+
+	sts = lpuart32_read(&sport->port, UARTSTAT);
+	rxcount = lpuart32_read(&sport->port, UARTWATER);
+	rxcount = rxcount >> UARTWATER_RXCNT_OFF;
+
+	if ((sts & UARTSTAT_RDRF || rxcount > 0) && !sport->lpuart_dma_rx_use)
+		lpuart32_rxint(sport);
+
+	if ((sts & UARTSTAT_TDRE) && !sport->lpuart_dma_tx_use)
+		lpuart32_txint(sport);
+
+	lpuart32_write(&sport->port, sts, UARTSTAT);
+	return IRQ_HANDLED;
+}
+
 /*
  * Timer function to simulate the hardware EOP (End Of Package) event.
  * The timer callback is to check for new RX data and copy to TTY buffer.