diff mbox series

[v6,2/2] spi: spi-geni-qcom: Add SPI Device mode support for GENI based QuPv3

Message ID 20230713115145.16770-3-quic_ptalari@quicinc.com
State Superseded
Headers show
Series spi-geni-qcom: Add SPI device mode support for GENI based QuPv3 | expand

Commit Message

Praveen Talari July 13, 2023, 11:51 a.m. UTC
From: Praveen Talari <ptalari@qti.qualcomm.com>

Currently spi geni driver supports only master mode operation.

Add spi device mode support to GENI based QuPv3.

Signed-off-by: Praveen Talari <ptalari@qti.qualcomm.com>
---
v4 -> v5:
- added code comments
- dropped get_spi_master api.

v3 -> v4:
- Used existing property spi-slave.

v2 -> v3:
- modified commit message to use device mode instead of slave mode

v1 -> v2
- modified the commit message
- added the code changes for code comments
---
 drivers/spi/spi-geni-qcom.c | 53 ++++++++++++++++++++++++++++++++-----
 1 file changed, 47 insertions(+), 6 deletions(-)

Comments

Mukesh Savaliya July 13, 2023, 5:49 p.m. UTC | #1
> -----Original Message-----
> From: Praveen Talari (QUIC)
> Sent: Thursday, July 13, 2023 5:22 PM
> To: agross@kernel.org; andersson@kernel.org; konrad.dybcio@linaro.org;
> broonie@kernel.org; linux-arm-msm@vger.kernel.org; linux-
> spi@vger.kernel.org; linux-kernel@vger.kernel.org
> Cc: Mukesh Savaliya (QUIC) <quic_msavaliy@quicinc.com>; Visweswara
> Tanuku (QUIC) <quic_vtanuku@quicinc.com>; Vijaya Krishna Nivarthi (Temp)
> (QUIC) <quic_vnivarth@quicinc.com>; Aniket RANDIVE (QUIC)
> <quic_arandive@quicinc.com>; Praveen Talari <ptalari@qti.qualcomm.com>
> Subject: [PATCH v6 2/2] spi: spi-geni-qcom: Add SPI Device mode support for
> GENI based QuPv3
> 
> From: Praveen Talari <ptalari@qti.qualcomm.com>
> 
> Currently spi geni driver supports only master mode operation.
> 
> Add spi device mode support to GENI based QuPv3.
> 
> Signed-off-by: Praveen Talari <ptalari@qti.qualcomm.com>
> ---
> v4 -> v5:
> - added code comments
> - dropped get_spi_master api.
> 
> v3 -> v4:
> - Used existing property spi-slave.
> 
> v2 -> v3:
> - modified commit message to use device mode instead of slave mode
> 
> v1 -> v2
> - modified the commit message
> - added the code changes for code comments
> ---
>  drivers/spi/spi-geni-qcom.c | 53 ++++++++++++++++++++++++++++++++--
> ---
>  1 file changed, 47 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c index
> 206cc04bb1ed..06b114f3f21a 100644
> --- a/drivers/spi/spi-geni-qcom.c
> +++ b/drivers/spi/spi-geni-qcom.c
> @@ -12,6 +12,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/pm_opp.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/property.h>
>  #include <linux/soc/qcom/geni-se.h>
>  #include <linux/spi/spi.h>
>  #include <linux/spinlock.h>
> @@ -52,6 +53,9 @@
>  #define SPI_CS_CLK_DELAY_MSK		GENMASK(19, 10)
>  #define SPI_CS_CLK_DELAY_SHFT		10
> 
> +#define SE_SPI_SLAVE_EN				(0x2BC)
> +#define SPI_SLAVE_EN				BIT(0)
> +
>  /* M_CMD OP codes for SPI */
>  #define SPI_TX_ONLY		1
>  #define SPI_RX_ONLY		2
> @@ -99,6 +103,16 @@ struct spi_geni_master {
>  	int cur_xfer_mode;
>  };
> 
> +static void spi_slv_setup(struct spi_geni_master *mas) {
> +	struct geni_se *se = &mas->se;
> +
> +	writel(SPI_SLAVE_EN, se->base + SE_SPI_SLAVE_EN);
> +	writel(GENI_IO_MUX_0_EN, se->base + GENI_OUTPUT_CTRL);
> +	writel(START_TRIGGER, se->base + SE_GENI_CFG_SEQ_START);
> +	dev_dbg(mas->dev, "spi slave setup done\n"); }
> +
>  static int get_spi_clk_cfg(unsigned int speed_hz,
>  			struct spi_geni_master *mas,
>  			unsigned int *clk_idx,
> @@ -140,12 +154,22 @@ static void handle_se_timeout(struct spi_master
> *spi,
>  	const struct spi_transfer *xfer;
> 
>  	spin_lock_irq(&mas->lock);
> -	reinit_completion(&mas->cancel_done);
>  	if (mas->cur_xfer_mode == GENI_SE_FIFO)
>  		writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
> 
>  	xfer = mas->cur_xfer;
>  	mas->cur_xfer = NULL;
> +
> +	if (spi->slave) {
> +		/*
> +		 * skip CMD Cancel sequnece since spi slave
> +		 * doesn`t support CMD Cancel sequnece
> +		 */
> +		spin_unlock_irq(&mas->lock);
> +		goto unmap_if_dma;
> +	}
> +
> +	reinit_completion(&mas->cancel_done);
>  	geni_se_cancel_m_cmd(se);
>  	spin_unlock_irq(&mas->lock);
> 
> @@ -542,6 +566,10 @@ static bool geni_can_dma(struct spi_controller *ctlr,
>  	if (mas->cur_xfer_mode == GENI_GPI_DMA)
>  		return true;
> 
> +	/* Set SE DMA mode for SPI slave. */
> +	if (ctlr->slave)
> +		return true;
> +
>  	len = get_xfer_len_in_words(xfer, mas);
>  	fifo_size = mas->tx_fifo_depth * mas->fifo_width_bits / mas-
> >cur_bits_per_word;
> 
> @@ -619,6 +647,7 @@ static void spi_geni_release_dma_chan(struct
> spi_geni_master *mas)
> 
>  static int spi_geni_init(struct spi_geni_master *mas)  {
> +	struct spi_master *spi = dev_get_drvdata(mas->dev);
>  	struct geni_se *se = &mas->se;
>  	unsigned int proto, major, minor, ver;
>  	u32 spi_tx_cfg, fifo_disable;
> @@ -627,7 +656,14 @@ static int spi_geni_init(struct spi_geni_master *mas)
>  	pm_runtime_get_sync(mas->dev);
> 
>  	proto = geni_se_read_proto(se);
> -	if (proto != GENI_SE_SPI) {
> +
> +	if (spi->slave) {
> +		if (proto != GENI_SE_SPI_SLAVE) {
> +			dev_err(mas->dev, "Invalid proto %d\n", proto);
> +			goto out_pm;
> +		}
> +		spi_slv_setup(mas);
> +	} else if (proto != GENI_SE_SPI) {
>  		dev_err(mas->dev, "Invalid proto %d\n", proto);
>  		goto out_pm;
>  	}
> @@ -677,9 +713,11 @@ static int spi_geni_init(struct spi_geni_master *mas)
>  	}
> 
>  	/* We always control CS manually */
> -	spi_tx_cfg = readl(se->base + SE_SPI_TRANS_CFG);
> -	spi_tx_cfg &= ~CS_TOGGLE;
> -	writel(spi_tx_cfg, se->base + SE_SPI_TRANS_CFG);
> +	if (!spi->slave) {
> +		spi_tx_cfg = readl(se->base + SE_SPI_TRANS_CFG);
> +		spi_tx_cfg &= ~CS_TOGGLE;
> +		writel(spi_tx_cfg, se->base + SE_SPI_TRANS_CFG);
> +	}
> 
>  out_pm:
>  	pm_runtime_put(mas->dev);
> @@ -1072,6 +1110,9 @@ static int spi_geni_probe(struct platform_device
> *pdev)
>  	pm_runtime_set_autosuspend_delay(&pdev->dev, 250);
>  	pm_runtime_enable(dev);
> 
> +	if (device_property_read_bool(&pdev->dev, "spi-slave"))
> +		spi->slave = true;
> +
>  	ret = geni_icc_get(&mas->se, NULL);
>  	if (ret)
>  		goto spi_geni_probe_runtime_disable;
> @@ -1092,7 +1133,7 @@ static int spi_geni_probe(struct platform_device
> *pdev)
>  	 * for dma (gsi) mode, the gsi will set cs based on params passed in
>  	 * TRE
>  	 */
> -	if (mas->cur_xfer_mode == GENI_SE_FIFO)
We can add separate function for GSI mode for the set_cs ? that can set params in TRE.
> +	if (!spi->slave && mas->cur_xfer_mode == GENI_SE_FIFO)
>  		spi->set_cs = spi_geni_set_cs;

> 
>  	ret = request_irq(mas->irq, geni_spi_isr, 0, dev_name(dev), spi);
> --
> 2.17.1
diff mbox series

Patch

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index 206cc04bb1ed..06b114f3f21a 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -12,6 +12,7 @@ 
 #include <linux/platform_device.h>
 #include <linux/pm_opp.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 #include <linux/soc/qcom/geni-se.h>
 #include <linux/spi/spi.h>
 #include <linux/spinlock.h>
@@ -52,6 +53,9 @@ 
 #define SPI_CS_CLK_DELAY_MSK		GENMASK(19, 10)
 #define SPI_CS_CLK_DELAY_SHFT		10
 
+#define SE_SPI_SLAVE_EN				(0x2BC)
+#define SPI_SLAVE_EN				BIT(0)
+
 /* M_CMD OP codes for SPI */
 #define SPI_TX_ONLY		1
 #define SPI_RX_ONLY		2
@@ -99,6 +103,16 @@  struct spi_geni_master {
 	int cur_xfer_mode;
 };
 
+static void spi_slv_setup(struct spi_geni_master *mas)
+{
+	struct geni_se *se = &mas->se;
+
+	writel(SPI_SLAVE_EN, se->base + SE_SPI_SLAVE_EN);
+	writel(GENI_IO_MUX_0_EN, se->base + GENI_OUTPUT_CTRL);
+	writel(START_TRIGGER, se->base + SE_GENI_CFG_SEQ_START);
+	dev_dbg(mas->dev, "spi slave setup done\n");
+}
+
 static int get_spi_clk_cfg(unsigned int speed_hz,
 			struct spi_geni_master *mas,
 			unsigned int *clk_idx,
@@ -140,12 +154,22 @@  static void handle_se_timeout(struct spi_master *spi,
 	const struct spi_transfer *xfer;
 
 	spin_lock_irq(&mas->lock);
-	reinit_completion(&mas->cancel_done);
 	if (mas->cur_xfer_mode == GENI_SE_FIFO)
 		writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
 
 	xfer = mas->cur_xfer;
 	mas->cur_xfer = NULL;
+
+	if (spi->slave) {
+		/*
+		 * skip CMD Cancel sequnece since spi slave
+		 * doesn`t support CMD Cancel sequnece
+		 */
+		spin_unlock_irq(&mas->lock);
+		goto unmap_if_dma;
+	}
+
+	reinit_completion(&mas->cancel_done);
 	geni_se_cancel_m_cmd(se);
 	spin_unlock_irq(&mas->lock);
 
@@ -542,6 +566,10 @@  static bool geni_can_dma(struct spi_controller *ctlr,
 	if (mas->cur_xfer_mode == GENI_GPI_DMA)
 		return true;
 
+	/* Set SE DMA mode for SPI slave. */
+	if (ctlr->slave)
+		return true;
+
 	len = get_xfer_len_in_words(xfer, mas);
 	fifo_size = mas->tx_fifo_depth * mas->fifo_width_bits / mas->cur_bits_per_word;
 
@@ -619,6 +647,7 @@  static void spi_geni_release_dma_chan(struct spi_geni_master *mas)
 
 static int spi_geni_init(struct spi_geni_master *mas)
 {
+	struct spi_master *spi = dev_get_drvdata(mas->dev);
 	struct geni_se *se = &mas->se;
 	unsigned int proto, major, minor, ver;
 	u32 spi_tx_cfg, fifo_disable;
@@ -627,7 +656,14 @@  static int spi_geni_init(struct spi_geni_master *mas)
 	pm_runtime_get_sync(mas->dev);
 
 	proto = geni_se_read_proto(se);
-	if (proto != GENI_SE_SPI) {
+
+	if (spi->slave) {
+		if (proto != GENI_SE_SPI_SLAVE) {
+			dev_err(mas->dev, "Invalid proto %d\n", proto);
+			goto out_pm;
+		}
+		spi_slv_setup(mas);
+	} else if (proto != GENI_SE_SPI) {
 		dev_err(mas->dev, "Invalid proto %d\n", proto);
 		goto out_pm;
 	}
@@ -677,9 +713,11 @@  static int spi_geni_init(struct spi_geni_master *mas)
 	}
 
 	/* We always control CS manually */
-	spi_tx_cfg = readl(se->base + SE_SPI_TRANS_CFG);
-	spi_tx_cfg &= ~CS_TOGGLE;
-	writel(spi_tx_cfg, se->base + SE_SPI_TRANS_CFG);
+	if (!spi->slave) {
+		spi_tx_cfg = readl(se->base + SE_SPI_TRANS_CFG);
+		spi_tx_cfg &= ~CS_TOGGLE;
+		writel(spi_tx_cfg, se->base + SE_SPI_TRANS_CFG);
+	}
 
 out_pm:
 	pm_runtime_put(mas->dev);
@@ -1072,6 +1110,9 @@  static int spi_geni_probe(struct platform_device *pdev)
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 250);
 	pm_runtime_enable(dev);
 
+	if (device_property_read_bool(&pdev->dev, "spi-slave"))
+		spi->slave = true;
+
 	ret = geni_icc_get(&mas->se, NULL);
 	if (ret)
 		goto spi_geni_probe_runtime_disable;
@@ -1092,7 +1133,7 @@  static int spi_geni_probe(struct platform_device *pdev)
 	 * for dma (gsi) mode, the gsi will set cs based on params passed in
 	 * TRE
 	 */
-	if (mas->cur_xfer_mode == GENI_SE_FIFO)
+	if (!spi->slave && mas->cur_xfer_mode == GENI_SE_FIFO)
 		spi->set_cs = spi_geni_set_cs;
 
 	ret = request_irq(mas->irq, geni_spi_isr, 0, dev_name(dev), spi);