[1/4] thermal: exynos: Add thermal interface support for linux thermal layer

Message ID 1330772767-16120-2-git-send-email-amit.kachhap@linaro.org
State New
Headers show

Commit Message

Amit Daniel Kachhap March 3, 2012, 11:06 a.m.
This codes uses the generic linux thermal layer and creates a bridge
between temperature sensors, linux thermal framework and cooling devices
for samsung exynos platform. This layer recieves or monitor the
temperature from the sensor and informs the generic thermal layer to take
the necessary cooling action.

Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org>
---
 drivers/thermal/Kconfig          |    8 +
 drivers/thermal/Makefile         |    1 +
 drivers/thermal/exynos_thermal.c |  272 ++++++++++++++++++++++++++++++++++++++
 include/linux/exynos_thermal.h   |   72 ++++++++++
 4 files changed, 353 insertions(+), 0 deletions(-)
 create mode 100644 drivers/thermal/exynos_thermal.c
 create mode 100644 include/linux/exynos_thermal.h

Comments

R, Durgadoss March 12, 2012, 10:51 a.m. | #1
Hi Amit,

Thanks for keeping this up. And Sorry for late reply.

> -----Original Message-----
> From: amit kachhap [mailto:amitdanielk@gmail.com] On Behalf Of Amit Daniel
> Kachhap
> Sent: Saturday, March 03, 2012 4:36 PM
> To: linux-pm@lists.linux-foundation.org; linux-samsung-soc@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org; mjg59@srcf.ucam.org; linux-
> acpi@vger.kernel.org; lenb@kernel.org; linaro-dev@lists.linaro.org; lm-
> sensors@lm-sensors.org; amit.kachhap@linaro.org; eduardo.valentin@ti.com; R,
> Durgadoss; patches@linaro.org
> Subject: [PATCH 1/4] thermal: exynos: Add thermal interface support for linux
> thermal layer
> 
> This codes uses the generic linux thermal layer and creates a bridge
> between temperature sensors, linux thermal framework and cooling devices
> for samsung exynos platform. This layer recieves or monitor the
> temperature from the sensor and informs the generic thermal layer to take
> the necessary cooling action.
> 
> Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org>
> ---
>  drivers/thermal/Kconfig          |    8 +
>  drivers/thermal/Makefile         |    1 +
>  drivers/thermal/exynos_thermal.c |  272 ++++++++++++++++++++++++++++++++++++++
>  include/linux/exynos_thermal.h   |   72 ++++++++++
>  4 files changed, 353 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/thermal/exynos_thermal.c
>  create mode 100644 include/linux/exynos_thermal.h
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 298c1cd..4e8df56 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -29,3 +29,11 @@ config CPU_THERMAL
>  	  This will be useful for platforms using the generic thermal interface
>  	  and not the ACPI interface.
>  	  If you want this support, you should say Y or M here.
> +
> +config SAMSUNG_THERMAL_INTERFACE
> +	bool "Samsung Thermal interface support"
> +	depends on THERMAL && CPU_THERMAL
> +	help
> +	  This is a samsung thermal interface which will be used as
> +	  a link between sensors and cooling devices with linux thermal
> +	  framework.
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 655cbc4..c67b6b2 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -4,3 +4,4 @@
> 
>  obj-$(CONFIG_THERMAL)		+= thermal_sys.o
>  obj-$(CONFIG_CPU_THERMAL)	+= cpu_cooling.o
> +obj-$(CONFIG_SAMSUNG_THERMAL_INTERFACE)	+= exynos_thermal.o
> diff --git a/drivers/thermal/exynos_thermal.c
> b/drivers/thermal/exynos_thermal.c
> new file mode 100644
> index 0000000..878d45c
> --- /dev/null
> +++ b/drivers/thermal/exynos_thermal.c
> @@ -0,0 +1,272 @@
> +/* linux/drivers/thermal/exynos_thermal.c
> + *
> + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/thermal.h>
> +#include <linux/platform_device.h>
> +#include <linux/cpufreq.h>
> +#include <linux/err.h>
> +#include <linux/slab.h>
> +#include <linux/cpu_cooling.h>
> +#include <linux/exynos_thermal.h>
> +
> +#define MAX_COOLING_DEVICE 4
> +struct exynos4_thermal_zone {
> +	unsigned int idle_interval;
> +	unsigned int active_interval;
> +	struct thermal_zone_device *therm_dev;
> +	struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
> +	unsigned int cool_dev_size;
> +	struct platform_device *exynos4_dev;
> +	struct thermal_sensor_conf *sensor_conf;
> +};
> +
> +static struct exynos4_thermal_zone *th_zone;
> +
> +static int exynos4_get_mode(struct thermal_zone_device *thermal,
> +			    enum thermal_device_mode *mode)
> +{
> +	if (th_zone->sensor_conf) {
> +		pr_info("Temperature sensor not initialised\n");
> +		*mode = THERMAL_DEVICE_DISABLED;
> +	} else
> +		*mode = THERMAL_DEVICE_ENABLED;
> +	return 0;
> +}
> +
> +static int exynos4_set_mode(struct thermal_zone_device *thermal,
> +			    enum thermal_device_mode mode)
> +{
> +	if (!th_zone->therm_dev) {
> +		pr_notice("thermal zone not registered\n");
> +		return 0;
> +	}
> +	if (mode == THERMAL_DEVICE_ENABLED)
> +		th_zone->therm_dev->polling_delay =
> +				th_zone->active_interval*1000;
> +	else
> +		th_zone->therm_dev->polling_delay =
> +				th_zone->idle_interval*1000;

If it is 'DISABLED' mode, shouldn't the polling delay be just 0 ?

> +
> +	thermal_zone_device_update(th_zone->therm_dev);
> +	pr_info("thermal polling set for duration=%d sec\n",
> +				th_zone->therm_dev->polling_delay/1000);
> +	return 0;
> +}
> +
> +/*This may be called from interrupt based temperature sensor*/
> +void exynos4_report_trigger(void)
> +{
> +	unsigned int monitor_temp;
> +
> +	if (!th_zone || !th_zone->therm_dev)
> +		return;
> +
> +	monitor_temp = th_zone->sensor_conf->trip_data.trip_val[0];

Why are we checking only against the 0-th trip point ?
Why not for other trip_val[i] also ?

> +
> +	thermal_zone_device_update(th_zone->therm_dev);
> +
> +	mutex_lock(&th_zone->therm_dev->lock);
> +	if (th_zone->therm_dev->last_temperature > monitor_temp)
> +		th_zone->therm_dev->polling_delay =
> +					th_zone->active_interval*1000;
> +	else
> +		th_zone->therm_dev->polling_delay =
> +					th_zone->idle_interval*1000;
> +
> +	kobject_uevent(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE);

Wouldn't it make more sense to pass the trip point id also as an 'env'
parameter ? This way, the user space can easily figure out which trip
point has been crossed.

> +	mutex_unlock(&th_zone->therm_dev->lock);
> +}
> +
> +static int exynos4_get_trip_type(struct thermal_zone_device *thermal, int
> trip,
> +				 enum thermal_trip_type *type)
> +{
> +	if (trip == 0 || trip == 1)
> +		*type = THERMAL_TRIP_STATE_ACTIVE;
> +	else if (trip == 2)
> +		*type = THERMAL_TRIP_CRITICAL;
> +	else
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static int exynos4_get_trip_temp(struct thermal_zone_device *thermal, int
> trip,
> +				 unsigned long *temp)
> +{
> +	/*Monitor zone*/
> +	if (trip == 0)
> +		*temp = th_zone->sensor_conf->trip_data.trip_val[0];
> +	/*Warn zone*/
> +	else if (trip == 1)
> +		*temp = th_zone->sensor_conf->trip_data.trip_val[1];
> +	/*Panic zone*/
> +	else if (trip == 2)
> +		*temp = th_zone->sensor_conf->trip_data.trip_val[2];
> +	else
> +		return -EINVAL;
> +	/*convert the temperature into millicelsius*/
> +	*temp = *temp * 1000;
> +
> +	return 0;
> +}

This could be:

if (trip < 0 || trip >2) return -EINVAL;
*temp = th_zone->sensor_conf->trip_data.trip_val[trip];
return 0;

> +
> +static int exynos4_get_crit_temp(struct thermal_zone_device *thermal,
> +				 unsigned long *temp)
> +{
> +	/*Panic zone*/
> +	*temp = th_zone->sensor_conf->trip_data.trip_val[2];
> +	/*convert the temperature into millicelsius*/
> +	*temp = *temp * 1000;
> +	return 0;
> +}

Why not make it, exynos4_get_trip_temp(thermal, 2, temp) ?

> +
> +static int exynos4_bind(struct thermal_zone_device *thermal,
> +			struct thermal_cooling_device *cdev)
> +{
> +	/* if the cooling device is the one from exynos4 bind it */
> +	if (cdev != th_zone->cool_dev[0])
> +		return 0;
> +
> +	if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) {
> +		pr_err("error binding cooling dev\n");
> +		return -EINVAL;
> +	}
> +	if (thermal_zone_bind_cooling_device(thermal, 1, cdev)) {
> +		pr_err("error binding cooling dev\n");
> +		return -EINVAL;

If we fail here, do you want to remove the earlier 'binding' also ?

> +	}
> +
> +	return 0;
> +
> +}
> +
> +static int exynos4_unbind(struct thermal_zone_device *thermal,
> +			  struct thermal_cooling_device *cdev)
> +{
> +	if (cdev != th_zone->cool_dev[0])
> +		return 0;
> +
> +	if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
> +		pr_err("error unbinding cooling dev\n");
> +		return -EINVAL;

I think we should still go ahead and try to 'unbind' the other one.

> +	}
> +	if (thermal_zone_unbind_cooling_device(thermal, 1, cdev)) {
> +		pr_err("error unbinding cooling dev\n");
> +		return -EINVAL;
> +	}
> +	return 0;
> +
> +}
> +
> +static int exynos4_get_temp(struct thermal_zone_device *thermal,
> +			       unsigned long *temp)
> +{
> +	void *data;
> +
> +	if (!th_zone->sensor_conf) {
> +		pr_info("Temperature sensor not initialised\n");
> +		return -EINVAL;
> +	}
> +	data = th_zone->sensor_conf->private_data;
> +	*temp = th_zone->sensor_conf->read_temperature(data);
> +	/*convert the temperature into millicelsius*/
> +	*temp = *temp * 1000;
> +	return 0;
> +}
> +
> +/* bind callback functions to thermalzone */
> +static struct thermal_zone_device_ops exynos4_dev_ops = {
> +	.bind = exynos4_bind,
> +	.unbind = exynos4_unbind,
> +	.get_temp = exynos4_get_temp,
> +	.get_mode = exynos4_get_mode,
> +	.set_mode = exynos4_set_mode,
> +	.get_trip_type = exynos4_get_trip_type,
> +	.get_trip_temp = exynos4_get_trip_temp,
> +	.get_crit_temp = exynos4_get_crit_temp,
> +};
> +
> +int exynos4_register_thermal(struct thermal_sensor_conf *sensor_conf)
> +{
> +	int ret, count, tab_size;
> +	struct freq_pctg_table *tab_ptr;
> +
> +	if (!sensor_conf || !sensor_conf->read_temperature) {
> +		pr_err("Temperature sensor not initialised\n");
> +		return -EINVAL;
> +	}
> +
> +	th_zone = kzalloc(sizeof(struct exynos4_thermal_zone), GFP_KERNEL);
> +	if (!th_zone) {
> +		ret = -ENOMEM;
> +		goto err_unregister;
> +	}
> +
> +	th_zone->sensor_conf = sensor_conf;
> +
> +	tab_ptr = (struct freq_pctg_table *)sensor_conf->cooling_data.freq_data;
> +	tab_size = sensor_conf->cooling_data.freq_pctg_count;
> +
> +	/*Register the cpufreq cooling device*/
> +	th_zone->cool_dev_size = 1;
> +	count = 0;
> +	th_zone->cool_dev[count] = cpufreq_cooling_register(
> +			(struct freq_pctg_table *)&(tab_ptr[count]),
> +			tab_size, cpumask_of(0));
> +
> +	if (IS_ERR(th_zone->cool_dev[count])) {
> +		pr_err("Failed to register cpufreq cooling device\n");
> +		ret = -EINVAL;
> +		th_zone->cool_dev_size = 0;
> +		goto err_unregister;
> +	}
> +
> +	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
> +				3, NULL, &exynos4_dev_ops, 0, 0, 0, 1000);
> +	if (IS_ERR(th_zone->therm_dev)) {
> +		pr_err("Failed to register thermal zone device\n");
> +		ret = -EINVAL;
> +		goto err_unregister;
> +	}
> +
> +	th_zone->active_interval = 1;
> +	th_zone->idle_interval = 10;
> +
> +	exynos4_set_mode(th_zone->therm_dev, THERMAL_DEVICE_DISABLED);
> +
> +	pr_info("Exynos: Kernel Thermal management registered\n");
> +
> +	return 0;
> +
> +err_unregister:
> +	exynos4_unregister_thermal();
> +	return ret;
> +}
> +EXPORT_SYMBOL(exynos4_register_thermal);
> +
> +void exynos4_unregister_thermal(void)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < th_zone->cool_dev_size; i++) {
> +		if (th_zone && th_zone->cool_dev[i])
> +			cpufreq_cooling_unregister(th_zone->cool_dev[i]);
> +	}
> +
> +	if (th_zone && th_zone->therm_dev)
> +		thermal_zone_device_unregister(th_zone->therm_dev);
> +
> +	kfree(th_zone);
> +
> +	pr_info("Exynos: Kernel Thermal management unregistered\n");
> +}
> +EXPORT_SYMBOL(exynos4_unregister_thermal);
> diff --git a/include/linux/exynos_thermal.h b/include/linux/exynos_thermal.h
> new file mode 100644
> index 0000000..186e409
> --- /dev/null
> +++ b/include/linux/exynos_thermal.h
> @@ -0,0 +1,72 @@
> +/* linux/include/linux/exynos_thermal.h
> + *
> + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#ifndef THERMAL_INTERFACE_H
> +#define THERMAL_INTERFACE_H
> +/* CPU Zone information */
> +
> +#define SENSOR_NAME_LEN	16
> +#define MAX_TRIP_COUNT	8
> +
> +#define PANIC_ZONE      4
> +#define WARN_ZONE       3
> +#define MONITOR_ZONE    2
> +#define SAFE_ZONE       1
> +#define NO_ACTION       0

I don't get why we need two separate SAFE and NO_ACTION
zones..To me, both should be the same.

> +
> +
> +struct	thermal_trip_point_conf {
> +	int trip_val[MAX_TRIP_COUNT];
> +	int trip_count;
> +};
> +
> +struct	thermal_cooling_conf {
> +	struct freq_pctg_table freq_data[MAX_TRIP_COUNT];
> +	int freq_pctg_count;
> +};
> +
> +/**
> + * struct exynos4_tmu_platform_data
> + * @name: name of the temperature sensor
> + * @read_temperature: A function pointer to read temperature info
> + * @private_data: Temperature sensor private data
> + * @sensor_data: Sensor specific information like trigger temperature, level
> + */
> +struct thermal_sensor_conf {
> +	char	name[SENSOR_NAME_LEN];
> +	int	(*read_temperature)(void *data);
> +	struct	thermal_trip_point_conf trip_data;
> +	struct	thermal_cooling_conf cooling_data;

Since both trip_count and freq_pctg_count are same at all
times (please correct me if I am wrong) I think it's better
to have a single 'count' variable inside this structure and move
trip_val and freq_data to this structure directly.

One General Concern:
Why do we even need this exynos_thermal layer between Thermal Framework
and the Thermal Sensor Drivers ? I think the thermal sensor driver (in
this case exynos_tmu.c) can directly register with the Thermal framework.
This means, we will soon have platformXXX_thermal.c files for each
platform, which is not really a good way to go IMHO.
I also understand that the framework does not have alarm attributes,
notification support etc..But We can add them if needed.

I have reviewed your two sets of patches independently. My only
request to you would be to post the next versions of both the patch
sets at the same time, so that it becomes easier to understand and test.

Thanks,
Durga

> +	void	*private_data;
> +};
> +
> +/**
> + * exynos4_register_thermal: Register to the exynos thermal interface.
> + * @sensor_conf:   Structure containing temperature sensor information
> + *
> + * returns zero on success, else negative errno.
> + */
> +int exynos4_register_thermal(struct thermal_sensor_conf *sensor_conf);
> +
> +/**
> + * exynos4_unregister_thermal: Un-register from the exynos thermal interface.
> + *
> + * return not applicable.
> + */
> +void exynos4_unregister_thermal(void);
> +
> +/**
> + * exynos4_report_trigger: Report any trigger level crossed in the
> + *	temperature sensor. This may be useful to take any cooling action.
> + *
> + * return not applicable.
> + */
> +extern void exynos4_report_trigger(void);
> +#endif
> --
> 1.7.1
Amit Daniel Kachhap March 13, 2012, 4:22 a.m. | #2
Hi Durgadoss,

Thanks for the detailed review.

On 12 March 2012 16:21, R, Durgadoss <durgadoss.r@intel.com> wrote:
> Hi Amit,
>
> Thanks for keeping this up. And Sorry for late reply.
>
>> -----Original Message-----
>> From: amit kachhap [mailto:amitdanielk@gmail.com] On Behalf Of Amit Daniel
>> Kachhap
>> Sent: Saturday, March 03, 2012 4:36 PM
>> To: linux-pm@lists.linux-foundation.org; linux-samsung-soc@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org; mjg59@srcf.ucam.org; linux-
>> acpi@vger.kernel.org; lenb@kernel.org; linaro-dev@lists.linaro.org; lm-
>> sensors@lm-sensors.org; amit.kachhap@linaro.org; eduardo.valentin@ti.com; R,
>> Durgadoss; patches@linaro.org
>> Subject: [PATCH 1/4] thermal: exynos: Add thermal interface support for linux
>> thermal layer
>>
>> This codes uses the generic linux thermal layer and creates a bridge
>> between temperature sensors, linux thermal framework and cooling devices
>> for samsung exynos platform. This layer recieves or monitor the
>> temperature from the sensor and informs the generic thermal layer to take
>> the necessary cooling action.
>>
>> Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org>
>> ---
>>  drivers/thermal/Kconfig          |    8 +
>>  drivers/thermal/Makefile         |    1 +
>>  drivers/thermal/exynos_thermal.c |  272 ++++++++++++++++++++++++++++++++++++++
>>  include/linux/exynos_thermal.h   |   72 ++++++++++
>>  4 files changed, 353 insertions(+), 0 deletions(-)
>>  create mode 100644 drivers/thermal/exynos_thermal.c
>>  create mode 100644 include/linux/exynos_thermal.h
>>
>> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
>> index 298c1cd..4e8df56 100644
>> --- a/drivers/thermal/Kconfig
>> +++ b/drivers/thermal/Kconfig
>> @@ -29,3 +29,11 @@ config CPU_THERMAL
>>         This will be useful for platforms using the generic thermal interface
>>         and not the ACPI interface.
>>         If you want this support, you should say Y or M here.
>> +
>> +config SAMSUNG_THERMAL_INTERFACE
>> +     bool "Samsung Thermal interface support"
>> +     depends on THERMAL && CPU_THERMAL
>> +     help
>> +       This is a samsung thermal interface which will be used as
>> +       a link between sensors and cooling devices with linux thermal
>> +       framework.
>> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
>> index 655cbc4..c67b6b2 100644
>> --- a/drivers/thermal/Makefile
>> +++ b/drivers/thermal/Makefile
>> @@ -4,3 +4,4 @@
>>
>>  obj-$(CONFIG_THERMAL)                += thermal_sys.o
>>  obj-$(CONFIG_CPU_THERMAL)    += cpu_cooling.o
>> +obj-$(CONFIG_SAMSUNG_THERMAL_INTERFACE)      += exynos_thermal.o
>> diff --git a/drivers/thermal/exynos_thermal.c
>> b/drivers/thermal/exynos_thermal.c
>> new file mode 100644
>> index 0000000..878d45c
>> --- /dev/null
>> +++ b/drivers/thermal/exynos_thermal.c
>> @@ -0,0 +1,272 @@
>> +/* linux/drivers/thermal/exynos_thermal.c
>> + *
>> + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
>> + *           http://www.samsung.com
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/thermal.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/cpufreq.h>
>> +#include <linux/err.h>
>> +#include <linux/slab.h>
>> +#include <linux/cpu_cooling.h>
>> +#include <linux/exynos_thermal.h>
>> +
>> +#define MAX_COOLING_DEVICE 4
>> +struct exynos4_thermal_zone {
>> +     unsigned int idle_interval;
>> +     unsigned int active_interval;
>> +     struct thermal_zone_device *therm_dev;
>> +     struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
>> +     unsigned int cool_dev_size;
>> +     struct platform_device *exynos4_dev;
>> +     struct thermal_sensor_conf *sensor_conf;
>> +};
>> +
>> +static struct exynos4_thermal_zone *th_zone;
>> +
>> +static int exynos4_get_mode(struct thermal_zone_device *thermal,
>> +                         enum thermal_device_mode *mode)
>> +{
>> +     if (th_zone->sensor_conf) {
>> +             pr_info("Temperature sensor not initialised\n");
>> +             *mode = THERMAL_DEVICE_DISABLED;
>> +     } else
>> +             *mode = THERMAL_DEVICE_ENABLED;
>> +     return 0;
>> +}
>> +
>> +static int exynos4_set_mode(struct thermal_zone_device *thermal,
>> +                         enum thermal_device_mode mode)
>> +{
>> +     if (!th_zone->therm_dev) {
>> +             pr_notice("thermal zone not registered\n");
>> +             return 0;
>> +     }
>> +     if (mode == THERMAL_DEVICE_ENABLED)
>> +             th_zone->therm_dev->polling_delay =
>> +                             th_zone->active_interval*1000;
>> +     else
>> +             th_zone->therm_dev->polling_delay =
>> +                             th_zone->idle_interval*1000;
>
> If it is 'DISABLED' mode, shouldn't the polling delay be just 0 ?
Yes Ideally this should be zero. But I wanted thermal monitoring to
always happen with some long interval in case of error scenarios.
Anyway I will check this again.
>
>> +
>> +     thermal_zone_device_update(th_zone->therm_dev);
>> +     pr_info("thermal polling set for duration=%d sec\n",
>> +                             th_zone->therm_dev->polling_delay/1000);
>> +     return 0;
>> +}
>> +
>> +/*This may be called from interrupt based temperature sensor*/
>> +void exynos4_report_trigger(void)
>> +{
>> +     unsigned int monitor_temp;
>> +
>> +     if (!th_zone || !th_zone->therm_dev)
>> +             return;
>> +
>> +     monitor_temp = th_zone->sensor_conf->trip_data.trip_val[0];
>
> Why are we checking only against the 0-th trip point ?
> Why not for other trip_val[i] also ?
Yes correct. Actually the trip temperatures are arranged in ascending order.
>
>> +
>> +     thermal_zone_device_update(th_zone->therm_dev);
>> +
>> +     mutex_lock(&th_zone->therm_dev->lock);
>> +     if (th_zone->therm_dev->last_temperature > monitor_temp)
>> +             th_zone->therm_dev->polling_delay =
>> +                                     th_zone->active_interval*1000;
>> +     else
>> +             th_zone->therm_dev->polling_delay =
>> +                                     th_zone->idle_interval*1000;
>> +
>> +     kobject_uevent(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE);
>
> Wouldn't it make more sense to pass the trip point id also as an 'env'
> parameter ? This way, the user space can easily figure out which trip
> point has been crossed.
Its a good suggestion. I will check if some uevent property allows that.
>
>> +     mutex_unlock(&th_zone->therm_dev->lock);
>> +}
>> +
>> +static int exynos4_get_trip_type(struct thermal_zone_device *thermal, int
>> trip,
>> +                              enum thermal_trip_type *type)
>> +{
>> +     if (trip == 0 || trip == 1)
>> +             *type = THERMAL_TRIP_STATE_ACTIVE;
>> +     else if (trip == 2)
>> +             *type = THERMAL_TRIP_CRITICAL;
>> +     else
>> +             return -EINVAL;
>> +
>> +     return 0;
>> +}
>> +
>> +static int exynos4_get_trip_temp(struct thermal_zone_device *thermal, int
>> trip,
>> +                              unsigned long *temp)
>> +{
>> +     /*Monitor zone*/
>> +     if (trip == 0)
>> +             *temp = th_zone->sensor_conf->trip_data.trip_val[0];
>> +     /*Warn zone*/
>> +     else if (trip == 1)
>> +             *temp = th_zone->sensor_conf->trip_data.trip_val[1];
>> +     /*Panic zone*/
>> +     else if (trip == 2)
>> +             *temp = th_zone->sensor_conf->trip_data.trip_val[2];
>> +     else
>> +             return -EINVAL;
>> +     /*convert the temperature into millicelsius*/
>> +     *temp = *temp * 1000;
>> +
>> +     return 0;
>> +}
>
> This could be:
>
> if (trip < 0 || trip >2) return -EINVAL;
> *temp = th_zone->sensor_conf->trip_data.trip_val[trip];
> return 0;
Agreed. Will apply.
>
>> +
>> +static int exynos4_get_crit_temp(struct thermal_zone_device *thermal,
>> +                              unsigned long *temp)
>> +{
>> +     /*Panic zone*/
>> +     *temp = th_zone->sensor_conf->trip_data.trip_val[2];
>> +     /*convert the temperature into millicelsius*/
>> +     *temp = *temp * 1000;
>> +     return 0;
>> +}
>
> Why not make it, exynos4_get_trip_temp(thermal, 2, temp) ?
OK.
>
>> +
>> +static int exynos4_bind(struct thermal_zone_device *thermal,
>> +                     struct thermal_cooling_device *cdev)
>> +{
>> +     /* if the cooling device is the one from exynos4 bind it */
>> +     if (cdev != th_zone->cool_dev[0])
>> +             return 0;
>> +
>> +     if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) {
>> +             pr_err("error binding cooling dev\n");
>> +             return -EINVAL;
>> +     }
>> +     if (thermal_zone_bind_cooling_device(thermal, 1, cdev)) {
>> +             pr_err("error binding cooling dev\n");
>> +             return -EINVAL;
>
> If we fail here, do you want to remove the earlier 'binding' also ?
Yes. Missed this error handling.
>
>> +     }
>> +
>> +     return 0;
>> +
>> +}
>> +
>> +static int exynos4_unbind(struct thermal_zone_device *thermal,
>> +                       struct thermal_cooling_device *cdev)
>> +{
>> +     if (cdev != th_zone->cool_dev[0])
>> +             return 0;
>> +
>> +     if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
>> +             pr_err("error unbinding cooling dev\n");
>> +             return -EINVAL;
>
> I think we should still go ahead and try to 'unbind' the other one.
Yes. Missed this error handling.
>
>> +     }
>> +     if (thermal_zone_unbind_cooling_device(thermal, 1, cdev)) {
>> +             pr_err("error unbinding cooling dev\n");
>> +             return -EINVAL;
>> +     }
>> +     return 0;
>> +
>> +}
>> +
>> +static int exynos4_get_temp(struct thermal_zone_device *thermal,
>> +                            unsigned long *temp)
>> +{
>> +     void *data;
>> +
>> +     if (!th_zone->sensor_conf) {
>> +             pr_info("Temperature sensor not initialised\n");
>> +             return -EINVAL;
>> +     }
>> +     data = th_zone->sensor_conf->private_data;
>> +     *temp = th_zone->sensor_conf->read_temperature(data);
>> +     /*convert the temperature into millicelsius*/
>> +     *temp = *temp * 1000;
>> +     return 0;
>> +}
>> +
>> +/* bind callback functions to thermalzone */
>> +static struct thermal_zone_device_ops exynos4_dev_ops = {
>> +     .bind = exynos4_bind,
>> +     .unbind = exynos4_unbind,
>> +     .get_temp = exynos4_get_temp,
>> +     .get_mode = exynos4_get_mode,
>> +     .set_mode = exynos4_set_mode,
>> +     .get_trip_type = exynos4_get_trip_type,
>> +     .get_trip_temp = exynos4_get_trip_temp,
>> +     .get_crit_temp = exynos4_get_crit_temp,
>> +};
>> +
>> +int exynos4_register_thermal(struct thermal_sensor_conf *sensor_conf)
>> +{
>> +     int ret, count, tab_size;
>> +     struct freq_pctg_table *tab_ptr;
>> +
>> +     if (!sensor_conf || !sensor_conf->read_temperature) {
>> +             pr_err("Temperature sensor not initialised\n");
>> +             return -EINVAL;
>> +     }
>> +
>> +     th_zone = kzalloc(sizeof(struct exynos4_thermal_zone), GFP_KERNEL);
>> +     if (!th_zone) {
>> +             ret = -ENOMEM;
>> +             goto err_unregister;
>> +     }
>> +
>> +     th_zone->sensor_conf = sensor_conf;
>> +
>> +     tab_ptr = (struct freq_pctg_table *)sensor_conf->cooling_data.freq_data;
>> +     tab_size = sensor_conf->cooling_data.freq_pctg_count;
>> +
>> +     /*Register the cpufreq cooling device*/
>> +     th_zone->cool_dev_size = 1;
>> +     count = 0;
>> +     th_zone->cool_dev[count] = cpufreq_cooling_register(
>> +                     (struct freq_pctg_table *)&(tab_ptr[count]),
>> +                     tab_size, cpumask_of(0));
>> +
>> +     if (IS_ERR(th_zone->cool_dev[count])) {
>> +             pr_err("Failed to register cpufreq cooling device\n");
>> +             ret = -EINVAL;
>> +             th_zone->cool_dev_size = 0;
>> +             goto err_unregister;
>> +     }
>> +
>> +     th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
>> +                             3, NULL, &exynos4_dev_ops, 0, 0, 0, 1000);
>> +     if (IS_ERR(th_zone->therm_dev)) {
>> +             pr_err("Failed to register thermal zone device\n");
>> +             ret = -EINVAL;
>> +             goto err_unregister;
>> +     }
>> +
>> +     th_zone->active_interval = 1;
>> +     th_zone->idle_interval = 10;
>> +
>> +     exynos4_set_mode(th_zone->therm_dev, THERMAL_DEVICE_DISABLED);
>> +
>> +     pr_info("Exynos: Kernel Thermal management registered\n");
>> +
>> +     return 0;
>> +
>> +err_unregister:
>> +     exynos4_unregister_thermal();
>> +     return ret;
>> +}
>> +EXPORT_SYMBOL(exynos4_register_thermal);
>> +
>> +void exynos4_unregister_thermal(void)
>> +{
>> +     unsigned int i;
>> +
>> +     for (i = 0; i < th_zone->cool_dev_size; i++) {
>> +             if (th_zone && th_zone->cool_dev[i])
>> +                     cpufreq_cooling_unregister(th_zone->cool_dev[i]);
>> +     }
>> +
>> +     if (th_zone && th_zone->therm_dev)
>> +             thermal_zone_device_unregister(th_zone->therm_dev);
>> +
>> +     kfree(th_zone);
>> +
>> +     pr_info("Exynos: Kernel Thermal management unregistered\n");
>> +}
>> +EXPORT_SYMBOL(exynos4_unregister_thermal);
>> diff --git a/include/linux/exynos_thermal.h b/include/linux/exynos_thermal.h
>> new file mode 100644
>> index 0000000..186e409
>> --- /dev/null
>> +++ b/include/linux/exynos_thermal.h
>> @@ -0,0 +1,72 @@
>> +/* linux/include/linux/exynos_thermal.h
>> + *
>> + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
>> + *           http://www.samsung.com
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#ifndef THERMAL_INTERFACE_H
>> +#define THERMAL_INTERFACE_H
>> +/* CPU Zone information */
>> +
>> +#define SENSOR_NAME_LEN      16
>> +#define MAX_TRIP_COUNT       8
>> +
>> +#define PANIC_ZONE      4
>> +#define WARN_ZONE       3
>> +#define MONITOR_ZONE    2
>> +#define SAFE_ZONE       1
>> +#define NO_ACTION       0
>
> I don't get why we need two separate SAFE and NO_ACTION
> zones..To me, both should be the same.
Yes not needed.
>
>> +
>> +
>> +struct       thermal_trip_point_conf {
>> +     int trip_val[MAX_TRIP_COUNT];
>> +     int trip_count;
>> +};
>> +
>> +struct       thermal_cooling_conf {
>> +     struct freq_pctg_table freq_data[MAX_TRIP_COUNT];
>> +     int freq_pctg_count;
>> +};
>> +
>> +/**
>> + * struct exynos4_tmu_platform_data
>> + * @name: name of the temperature sensor
>> + * @read_temperature: A function pointer to read temperature info
>> + * @private_data: Temperature sensor private data
>> + * @sensor_data: Sensor specific information like trigger temperature, level
>> + */
>> +struct thermal_sensor_conf {
>> +     char    name[SENSOR_NAME_LEN];
>> +     int     (*read_temperature)(void *data);
>> +     struct  thermal_trip_point_conf trip_data;
>> +     struct  thermal_cooling_conf cooling_data;
>
> Since both trip_count and freq_pctg_count are same at all
> times (please correct me if I am wrong) I think it's better
> to have a single 'count' variable inside this structure and move
> trip_val and freq_data to this structure directly.
No trip_count and pctg_count are different.
>
> One General Concern:
> Why do we even need this exynos_thermal layer between Thermal Framework
> and the Thermal Sensor Drivers ? I think the thermal sensor driver (in
> this case exynos_tmu.c) can directly register with the Thermal framework.
> This means, we will soon have platformXXX_thermal.c files for each
> platform, which is not really a good way to go IMHO.
> I also understand that the framework does not have alarm attributes,
> notification support etc..But We can add them if needed.
Yes even comments from Guenter Roeck and Mark Brown also point in the
same direction. Actually I wanted to separate the sensor h/w
implementation independent from thermal management algorithm so its
future modification may be clean. But looks like the agreement is to
merge them.
>
> I have reviewed your two sets of patches independently. My only
> request to you would be to post the next versions of both the patch
> sets at the same time, so that it becomes easier to understand and test.
Thanks even i also think this a good way.
>
> Thanks,
> Durga
>
>> +     void    *private_data;
>> +};
>> +
>> +/**
>> + * exynos4_register_thermal: Register to the exynos thermal interface.
>> + * @sensor_conf:   Structure containing temperature sensor information
>> + *
>> + * returns zero on success, else negative errno.
>> + */
>> +int exynos4_register_thermal(struct thermal_sensor_conf *sensor_conf);
>> +
>> +/**
>> + * exynos4_unregister_thermal: Un-register from the exynos thermal interface.
>> + *
>> + * return not applicable.
>> + */
>> +void exynos4_unregister_thermal(void);
>> +
>> +/**
>> + * exynos4_report_trigger: Report any trigger level crossed in the
>> + *   temperature sensor. This may be useful to take any cooling action.
>> + *
>> + * return not applicable.
>> + */
>> +extern void exynos4_report_trigger(void);
>> +#endif
>> --
>> 1.7.1
>
R, Durgadoss March 13, 2012, 4:48 a.m. | #3
Hi Amit,

[snip.]

> >> +
> >> +     kobject_uevent(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE);
> >
> > Wouldn't it make more sense to pass the trip point id also as an 'env'
> > parameter ? This way, the user space can easily figure out which trip
> > point has been crossed.
> Its a good suggestion. I will check if some uevent property allows that.

The kobject_uevent_env(...) call allows that. The third argument takes a
char *envp[]. For example, We could pass "trip=0" to indicate the trip point.
I should have mentioned this in my previous reply itself..missed it..

Thanks,
Durga

Patch

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 298c1cd..4e8df56 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -29,3 +29,11 @@  config CPU_THERMAL
 	  This will be useful for platforms using the generic thermal interface
 	  and not the ACPI interface.
 	  If you want this support, you should say Y or M here.
+
+config SAMSUNG_THERMAL_INTERFACE
+	bool "Samsung Thermal interface support"
+	depends on THERMAL && CPU_THERMAL
+	help
+	  This is a samsung thermal interface which will be used as
+	  a link between sensors and cooling devices with linux thermal
+	  framework.
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 655cbc4..c67b6b2 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -4,3 +4,4 @@ 
 
 obj-$(CONFIG_THERMAL)		+= thermal_sys.o
 obj-$(CONFIG_CPU_THERMAL)	+= cpu_cooling.o
+obj-$(CONFIG_SAMSUNG_THERMAL_INTERFACE)	+= exynos_thermal.o
diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
new file mode 100644
index 0000000..878d45c
--- /dev/null
+++ b/drivers/thermal/exynos_thermal.c
@@ -0,0 +1,272 @@ 
+/* linux/drivers/thermal/exynos_thermal.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/cpu_cooling.h>
+#include <linux/exynos_thermal.h>
+
+#define MAX_COOLING_DEVICE 4
+struct exynos4_thermal_zone {
+	unsigned int idle_interval;
+	unsigned int active_interval;
+	struct thermal_zone_device *therm_dev;
+	struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
+	unsigned int cool_dev_size;
+	struct platform_device *exynos4_dev;
+	struct thermal_sensor_conf *sensor_conf;
+};
+
+static struct exynos4_thermal_zone *th_zone;
+
+static int exynos4_get_mode(struct thermal_zone_device *thermal,
+			    enum thermal_device_mode *mode)
+{
+	if (th_zone->sensor_conf) {
+		pr_info("Temperature sensor not initialised\n");
+		*mode = THERMAL_DEVICE_DISABLED;
+	} else
+		*mode = THERMAL_DEVICE_ENABLED;
+	return 0;
+}
+
+static int exynos4_set_mode(struct thermal_zone_device *thermal,
+			    enum thermal_device_mode mode)
+{
+	if (!th_zone->therm_dev) {
+		pr_notice("thermal zone not registered\n");
+		return 0;
+	}
+	if (mode == THERMAL_DEVICE_ENABLED)
+		th_zone->therm_dev->polling_delay =
+				th_zone->active_interval*1000;
+	else
+		th_zone->therm_dev->polling_delay =
+				th_zone->idle_interval*1000;
+
+	thermal_zone_device_update(th_zone->therm_dev);
+	pr_info("thermal polling set for duration=%d sec\n",
+				th_zone->therm_dev->polling_delay/1000);
+	return 0;
+}
+
+/*This may be called from interrupt based temperature sensor*/
+void exynos4_report_trigger(void)
+{
+	unsigned int monitor_temp;
+
+	if (!th_zone || !th_zone->therm_dev)
+		return;
+
+	monitor_temp = th_zone->sensor_conf->trip_data.trip_val[0];
+
+	thermal_zone_device_update(th_zone->therm_dev);
+
+	mutex_lock(&th_zone->therm_dev->lock);
+	if (th_zone->therm_dev->last_temperature > monitor_temp)
+		th_zone->therm_dev->polling_delay =
+					th_zone->active_interval*1000;
+	else
+		th_zone->therm_dev->polling_delay =
+					th_zone->idle_interval*1000;
+
+	kobject_uevent(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE);
+	mutex_unlock(&th_zone->therm_dev->lock);
+}
+
+static int exynos4_get_trip_type(struct thermal_zone_device *thermal, int trip,
+				 enum thermal_trip_type *type)
+{
+	if (trip == 0 || trip == 1)
+		*type = THERMAL_TRIP_STATE_ACTIVE;
+	else if (trip == 2)
+		*type = THERMAL_TRIP_CRITICAL;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int exynos4_get_trip_temp(struct thermal_zone_device *thermal, int trip,
+				 unsigned long *temp)
+{
+	/*Monitor zone*/
+	if (trip == 0)
+		*temp = th_zone->sensor_conf->trip_data.trip_val[0];
+	/*Warn zone*/
+	else if (trip == 1)
+		*temp = th_zone->sensor_conf->trip_data.trip_val[1];
+	/*Panic zone*/
+	else if (trip == 2)
+		*temp = th_zone->sensor_conf->trip_data.trip_val[2];
+	else
+		return -EINVAL;
+	/*convert the temperature into millicelsius*/
+	*temp = *temp * 1000;
+
+	return 0;
+}
+
+static int exynos4_get_crit_temp(struct thermal_zone_device *thermal,
+				 unsigned long *temp)
+{
+	/*Panic zone*/
+	*temp = th_zone->sensor_conf->trip_data.trip_val[2];
+	/*convert the temperature into millicelsius*/
+	*temp = *temp * 1000;
+	return 0;
+}
+
+static int exynos4_bind(struct thermal_zone_device *thermal,
+			struct thermal_cooling_device *cdev)
+{
+	/* if the cooling device is the one from exynos4 bind it */
+	if (cdev != th_zone->cool_dev[0])
+		return 0;
+
+	if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) {
+		pr_err("error binding cooling dev\n");
+		return -EINVAL;
+	}
+	if (thermal_zone_bind_cooling_device(thermal, 1, cdev)) {
+		pr_err("error binding cooling dev\n");
+		return -EINVAL;
+	}
+
+	return 0;
+
+}
+
+static int exynos4_unbind(struct thermal_zone_device *thermal,
+			  struct thermal_cooling_device *cdev)
+{
+	if (cdev != th_zone->cool_dev[0])
+		return 0;
+
+	if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
+		pr_err("error unbinding cooling dev\n");
+		return -EINVAL;
+	}
+	if (thermal_zone_unbind_cooling_device(thermal, 1, cdev)) {
+		pr_err("error unbinding cooling dev\n");
+		return -EINVAL;
+	}
+	return 0;
+
+}
+
+static int exynos4_get_temp(struct thermal_zone_device *thermal,
+			       unsigned long *temp)
+{
+	void *data;
+
+	if (!th_zone->sensor_conf) {
+		pr_info("Temperature sensor not initialised\n");
+		return -EINVAL;
+	}
+	data = th_zone->sensor_conf->private_data;
+	*temp = th_zone->sensor_conf->read_temperature(data);
+	/*convert the temperature into millicelsius*/
+	*temp = *temp * 1000;
+	return 0;
+}
+
+/* bind callback functions to thermalzone */
+static struct thermal_zone_device_ops exynos4_dev_ops = {
+	.bind = exynos4_bind,
+	.unbind = exynos4_unbind,
+	.get_temp = exynos4_get_temp,
+	.get_mode = exynos4_get_mode,
+	.set_mode = exynos4_set_mode,
+	.get_trip_type = exynos4_get_trip_type,
+	.get_trip_temp = exynos4_get_trip_temp,
+	.get_crit_temp = exynos4_get_crit_temp,
+};
+
+int exynos4_register_thermal(struct thermal_sensor_conf *sensor_conf)
+{
+	int ret, count, tab_size;
+	struct freq_pctg_table *tab_ptr;
+
+	if (!sensor_conf || !sensor_conf->read_temperature) {
+		pr_err("Temperature sensor not initialised\n");
+		return -EINVAL;
+	}
+
+	th_zone = kzalloc(sizeof(struct exynos4_thermal_zone), GFP_KERNEL);
+	if (!th_zone) {
+		ret = -ENOMEM;
+		goto err_unregister;
+	}
+
+	th_zone->sensor_conf = sensor_conf;
+
+	tab_ptr = (struct freq_pctg_table *)sensor_conf->cooling_data.freq_data;
+	tab_size = sensor_conf->cooling_data.freq_pctg_count;
+
+	/*Register the cpufreq cooling device*/
+	th_zone->cool_dev_size = 1;
+	count = 0;
+	th_zone->cool_dev[count] = cpufreq_cooling_register(
+			(struct freq_pctg_table *)&(tab_ptr[count]),
+			tab_size, cpumask_of(0));
+
+	if (IS_ERR(th_zone->cool_dev[count])) {
+		pr_err("Failed to register cpufreq cooling device\n");
+		ret = -EINVAL;
+		th_zone->cool_dev_size = 0;
+		goto err_unregister;
+	}
+
+	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
+				3, NULL, &exynos4_dev_ops, 0, 0, 0, 1000);
+	if (IS_ERR(th_zone->therm_dev)) {
+		pr_err("Failed to register thermal zone device\n");
+		ret = -EINVAL;
+		goto err_unregister;
+	}
+
+	th_zone->active_interval = 1;
+	th_zone->idle_interval = 10;
+
+	exynos4_set_mode(th_zone->therm_dev, THERMAL_DEVICE_DISABLED);
+
+	pr_info("Exynos: Kernel Thermal management registered\n");
+
+	return 0;
+
+err_unregister:
+	exynos4_unregister_thermal();
+	return ret;
+}
+EXPORT_SYMBOL(exynos4_register_thermal);
+
+void exynos4_unregister_thermal(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < th_zone->cool_dev_size; i++) {
+		if (th_zone && th_zone->cool_dev[i])
+			cpufreq_cooling_unregister(th_zone->cool_dev[i]);
+	}
+
+	if (th_zone && th_zone->therm_dev)
+		thermal_zone_device_unregister(th_zone->therm_dev);
+
+	kfree(th_zone);
+
+	pr_info("Exynos: Kernel Thermal management unregistered\n");
+}
+EXPORT_SYMBOL(exynos4_unregister_thermal);
diff --git a/include/linux/exynos_thermal.h b/include/linux/exynos_thermal.h
new file mode 100644
index 0000000..186e409
--- /dev/null
+++ b/include/linux/exynos_thermal.h
@@ -0,0 +1,72 @@ 
+/* linux/include/linux/exynos_thermal.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef THERMAL_INTERFACE_H
+#define THERMAL_INTERFACE_H
+/* CPU Zone information */
+
+#define SENSOR_NAME_LEN	16
+#define MAX_TRIP_COUNT	8
+
+#define PANIC_ZONE      4
+#define WARN_ZONE       3
+#define MONITOR_ZONE    2
+#define SAFE_ZONE       1
+#define NO_ACTION       0
+
+
+struct	thermal_trip_point_conf {
+	int trip_val[MAX_TRIP_COUNT];
+	int trip_count;
+};
+
+struct	thermal_cooling_conf {
+	struct freq_pctg_table freq_data[MAX_TRIP_COUNT];
+	int freq_pctg_count;
+};
+
+/**
+ * struct exynos4_tmu_platform_data
+ * @name: name of the temperature sensor
+ * @read_temperature: A function pointer to read temperature info
+ * @private_data: Temperature sensor private data
+ * @sensor_data: Sensor specific information like trigger temperature, level
+ */
+struct thermal_sensor_conf {
+	char	name[SENSOR_NAME_LEN];
+	int	(*read_temperature)(void *data);
+	struct	thermal_trip_point_conf trip_data;
+	struct	thermal_cooling_conf cooling_data;
+	void	*private_data;
+};
+
+/**
+ * exynos4_register_thermal: Register to the exynos thermal interface.
+ * @sensor_conf:   Structure containing temperature sensor information
+ *
+ * returns zero on success, else negative errno.
+ */
+int exynos4_register_thermal(struct thermal_sensor_conf *sensor_conf);
+
+/**
+ * exynos4_unregister_thermal: Un-register from the exynos thermal interface.
+ *
+ * return not applicable.
+ */
+void exynos4_unregister_thermal(void);
+
+/**
+ * exynos4_report_trigger: Report any trigger level crossed in the
+ *	temperature sensor. This may be useful to take any cooling action.
+ *
+ * return not applicable.
+ */
+extern void exynos4_report_trigger(void);
+#endif