diff mbox series

[v5] mmc: sdhci-of-dwcmshc: Add runtime PM operations

Message ID 20230728122052.296488-1-limings@nvidia.com
State New
Headers show
Series [v5] mmc: sdhci-of-dwcmshc: Add runtime PM operations | expand

Commit Message

Liming Sun July 28, 2023, 12:20 p.m. UTC
This commit implements the runtime PM operations to disable eMMC
card clock when idle.

Reviewed-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Liming Sun <limings@nvidia.com>
---
v4->v5:
    - Address Adrian's comment to move the pm_enable to the end to
      avoid race;
v3->v4:
    - Fix compiling reported by 'kernel test robot';
v2->v3:
    - Revise the commit message;
v1->v2:
    Updates for comments from Ulf:
    - Make the runtime PM logic generic for sdhci-of-dwcmshc;
v1: Initial version.
---
 drivers/mmc/host/sdhci-of-dwcmshc.c | 54 ++++++++++++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)

Comments

Adrian Hunter Aug. 1, 2023, 3:36 p.m. UTC | #1
On 28/07/23 15:20, Liming Sun wrote:
> This commit implements the runtime PM operations to disable eMMC
> card clock when idle.
> 
> Reviewed-by: David Thompson <davthompson@nvidia.com>
> Signed-off-by: Liming Sun <limings@nvidia.com>
> ---
> v4->v5:
>     - Address Adrian's comment to move the pm_enable to the end to
>       avoid race;
> v3->v4:
>     - Fix compiling reported by 'kernel test robot';
> v2->v3:
>     - Revise the commit message;
> v1->v2:
>     Updates for comments from Ulf:
>     - Make the runtime PM logic generic for sdhci-of-dwcmshc;
> v1: Initial version.
> ---
>  drivers/mmc/host/sdhci-of-dwcmshc.c | 54 ++++++++++++++++++++++++++++-
>  1 file changed, 53 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
> index e68cd87998c8..5cee42d72257 100644
> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> @@ -15,6 +15,7 @@
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/reset.h>
>  #include <linux/sizes.h>
>  
> @@ -559,6 +560,8 @@ static int dwcmshc_probe(struct platform_device *pdev)
>  	if (err)
>  		goto err_setup_host;
>  
> +	devm_pm_runtime_enable(dev);

By default, runtime PM regards the device as not active, so
typically drivers will use something like pm_runtime_set_active()
prior to pm_runtime_enable(dev)

In fact it is better to enable before adding the host but
increment the usage count to prevent runtime suspend.  That
means adding some get/puts, ending up with something like:

+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);

	err = sdhci_setup_host(host);
	if (err)
-		goto err_clk;
+		goto err_rpm;

	if (rk_priv)
		dwcmshc_rk35xx_postinit(host, priv);

	err = __sdhci_add_host(host);
	if (err)
		goto err_setup_host;

+	pm_runtime_put_sync(dev);

	return 0;

err_setup_host:
	sdhci_cleanup_host(host);
+ err_rpm:
+	pm_runtime_disable(dev);
+	pm_runtime_put_noidle(dev);
err_clk:
	clk_disable_unprepare(pltfm_host->clk);
	clk_disable_unprepare(priv->bus_clk);
	if (rk_priv)
		clk_bulk_disable_unprepare(RK35xx_MAX_CLKS,
					   rk_priv->rockchip_clks);
free_pltfm:
	sdhci_pltfm_free(pdev);
	return err;

> +
>  	return 0;
>  
>  err_setup_host:
> @@ -646,7 +649,56 @@ static int dwcmshc_resume(struct device *dev)
>  }
>  #endif
>  
> -static SIMPLE_DEV_PM_OPS(dwcmshc_pmops, dwcmshc_suspend, dwcmshc_resume);
> +#ifdef CONFIG_PM
> +
> +static void dwcmshc_enable_card_clk(struct sdhci_host *host)
> +{
> +	u16 ctrl;
> +
> +	ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);

You could save an mmio write:

	if (ctrl & SDHCI_CLOCK_INT_EN && !(ctrl & SDHCI_CLOCK_CARD_EN)) {

> +	ctrl |= SDHCI_CLOCK_CARD_EN;
> +	sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL);

	}

> +}
> +
> +static void dwcmshc_disable_card_clk(struct sdhci_host *host)
> +{
> +	u16 ctrl;
> +
> +	ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);

You could save an mmio write:

	if (ctrl & SDHCI_CLOCK_CARD_EN) {

> +	ctrl &= ~SDHCI_CLOCK_CARD_EN;
> +	sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL);

	}

> +}
> +
> +static int dwcmshc_runtime_suspend(struct device *dev)
> +{
> +	struct sdhci_host *host = dev_get_drvdata(dev);
> +	int ret = 0;

ret doesn't need initialization

> +
> +	ret = sdhci_runtime_suspend_host(host);

If you *only* want to disable the card clock, then
it is probably not necessary to call sdhci_runtime_suspend_host()
and sdhci_runtime_resume_host().

> +	if (!ret)
> +		dwcmshc_disable_card_clk(host);
> +
> +	return ret;
> +}
> +
> +static int dwcmshc_runtime_resume(struct device *dev)
> +{
> +	struct sdhci_host *host = dev_get_drvdata(dev);
> +	int ret = 0;

ret isn't needed

> +
> +	dwcmshc_enable_card_clk(host);
> +	ret = sdhci_runtime_resume_host(host, 0);

just
	return sdhci_runtime_resume_host(host, 0);

> +
> +	return ret;
> +}
> +
> +#endif
> +
> +static const struct dev_pm_ops dwcmshc_pmops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(dwcmshc_suspend, dwcmshc_resume)

Typically you need a way to coordinate runtime PM and system PM, refer:

https://www.kernel.org/doc/html/latest/power/runtime_pm.html#runtime-pm-and-system-sleep

> +	SET_RUNTIME_PM_OPS(dwcmshc_runtime_suspend,
> +			   dwcmshc_runtime_resume, NULL)
> +};
>  
>  static struct platform_driver sdhci_dwcmshc_driver = {
>  	.driver	= {
Liming Sun Aug. 4, 2023, 11:29 p.m. UTC | #2
> -----Original Message-----
> From: Adrian Hunter <adrian.hunter@intel.com>
> Sent: Tuesday, August 1, 2023 11:37 AM
> To: Liming Sun <limings@nvidia.com>; Ulf Hansson <ulf.hansson@linaro.org>;
> David Thompson <davthompson@nvidia.com>; Shawn Lin <shawn.lin@rock-
> chips.com>
> Cc: linux-mmc@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v5] mmc: sdhci-of-dwcmshc: Add runtime PM operations
> 
> On 28/07/23 15:20, Liming Sun wrote:
> > This commit implements the runtime PM operations to disable eMMC
> > card clock when idle.
> >
> > Reviewed-by: David Thompson <davthompson@nvidia.com>
> > Signed-off-by: Liming Sun <limings@nvidia.com>
> > ---
> > v4->v5:
> >     - Address Adrian's comment to move the pm_enable to the end to
> >       avoid race;
> > v3->v4:
> >     - Fix compiling reported by 'kernel test robot';
> > v2->v3:
> >     - Revise the commit message;
> > v1->v2:
> >     Updates for comments from Ulf:
> >     - Make the runtime PM logic generic for sdhci-of-dwcmshc;
> > v1: Initial version.
> > ---
> >  drivers/mmc/host/sdhci-of-dwcmshc.c | 54
> ++++++++++++++++++++++++++++-
> >  1 file changed, 53 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-
> of-dwcmshc.c
> > index e68cd87998c8..5cee42d72257 100644
> > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> > @@ -15,6 +15,7 @@
> >  #include <linux/module.h>
> >  #include <linux/of.h>
> >  #include <linux/of_device.h>
> > +#include <linux/pm_runtime.h>
> >  #include <linux/reset.h>
> >  #include <linux/sizes.h>
> >
> > @@ -559,6 +560,8 @@ static int dwcmshc_probe(struct platform_device
> *pdev)
> >  	if (err)
> >  		goto err_setup_host;
> >
> > +	devm_pm_runtime_enable(dev);
> 
> By default, runtime PM regards the device as not active, so
> typically drivers will use something like pm_runtime_set_active()
> prior to pm_runtime_enable(dev)
> 
> In fact it is better to enable before adding the host but
> increment the usage count to prevent runtime suspend.  That
> means adding some get/puts, ending up with something like:
> 
> +	pm_runtime_get_noresume(dev);
> +	pm_runtime_set_active(dev);
> +	pm_runtime_enable(dev);
> 
> 	err = sdhci_setup_host(host);
> 	if (err)
> -		goto err_clk;
> +		goto err_rpm;
> 
> 	if (rk_priv)
> 		dwcmshc_rk35xx_postinit(host, priv);
> 
> 	err = __sdhci_add_host(host);
> 	if (err)
> 		goto err_setup_host;
> 
> +	pm_runtime_put_sync(dev);
> 
> 	return 0;
> 
> err_setup_host:
> 	sdhci_cleanup_host(host);
> + err_rpm:
> +	pm_runtime_disable(dev);
> +	pm_runtime_put_noidle(dev);
> err_clk:
> 	clk_disable_unprepare(pltfm_host->clk);
> 	clk_disable_unprepare(priv->bus_clk);
> 	if (rk_priv)
> 		clk_bulk_disable_unprepare(RK35xx_MAX_CLKS,
> 					   rk_priv->rockchip_clks);
> free_pltfm:
> 	sdhci_pltfm_free(pdev);
> 	return err;
> 

Updated in v6.

> > +
> >  	return 0;
> >
> >  err_setup_host:
> > @@ -646,7 +649,56 @@ static int dwcmshc_resume(struct device *dev)
> >  }
> >  #endif
> >
> > -static SIMPLE_DEV_PM_OPS(dwcmshc_pmops, dwcmshc_suspend,
> dwcmshc_resume);
> > +#ifdef CONFIG_PM
> > +
> > +static void dwcmshc_enable_card_clk(struct sdhci_host *host)
> > +{
> > +	u16 ctrl;
> > +
> > +	ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> 
> You could save an mmio write:
> 
> 	if (ctrl & SDHCI_CLOCK_INT_EN && !(ctrl & SDHCI_CLOCK_CARD_EN)) {
> 
> > +	ctrl |= SDHCI_CLOCK_CARD_EN;
> > +	sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL);
> 
> 	}

Updated in v6.

> 
> > +}
> > +
> > +static void dwcmshc_disable_card_clk(struct sdhci_host *host)
> > +{
> > +	u16 ctrl;
> > +
> > +	ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> 
> You could save an mmio write:
> 
> 	if (ctrl & SDHCI_CLOCK_CARD_EN) {
> 
> > +	ctrl &= ~SDHCI_CLOCK_CARD_EN;
> > +	sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL);
> 
> 	}

Updated in v6.

> 
> > +}
> > +
> > +static int dwcmshc_runtime_suspend(struct device *dev)
> > +{
> > +	struct sdhci_host *host = dev_get_drvdata(dev);
> > +	int ret = 0;
> 
> ret doesn't need initialization

Updated in v6.

> 
> > +
> > +	ret = sdhci_runtime_suspend_host(host);
> 
> If you *only* want to disable the card clock, then
> it is probably not necessary to call sdhci_runtime_suspend_host()
> and sdhci_runtime_resume_host().
> 

If, only cares about the card clock. Tested and removed the 
sdhci_runtime_suspend_host() and sdhci_runtime_resume_host()
to keep it simple. 

> > +	if (!ret)
> > +		dwcmshc_disable_card_clk(host);
> > +
> > +	return ret;
> > +}
> > +
> > +static int dwcmshc_runtime_resume(struct device *dev)
> > +{
> > +	struct sdhci_host *host = dev_get_drvdata(dev);
> > +	int ret = 0;
> 
> ret isn't needed

Removed in v6.

> 
> > +
> > +	dwcmshc_enable_card_clk(host);
> > +	ret = sdhci_runtime_resume_host(host, 0);
> 
> just
> 	return sdhci_runtime_resume_host(host, 0);

Updated in v6.

> 
> > +
> > +	return ret;
> > +}
> > +
> > +#endif
> > +
> > +static const struct dev_pm_ops dwcmshc_pmops = {
> > +	SET_SYSTEM_SLEEP_PM_OPS(dwcmshc_suspend, dwcmshc_resume)
> 
> Typically you need a way to coordinate runtime PM and system PM, refer:
> 
> https://www.kernel.org/doc/html/latest/power/runtime_pm.html#runtime-
> pm-and-system-sleep

Thanks. Added pm_runtime_force_suspend() and
pm_runtime_force_resume() in the system sleep() 
and resume() function to make the two states consistent.

> 
> > +	SET_RUNTIME_PM_OPS(dwcmshc_runtime_suspend,
> > +			   dwcmshc_runtime_resume, NULL)
> > +};
> >
> >  static struct platform_driver sdhci_dwcmshc_driver = {
> >  	.driver	= {
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index e68cd87998c8..5cee42d72257 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -15,6 +15,7 @@ 
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/sizes.h>
 
@@ -559,6 +560,8 @@  static int dwcmshc_probe(struct platform_device *pdev)
 	if (err)
 		goto err_setup_host;
 
+	devm_pm_runtime_enable(dev);
+
 	return 0;
 
 err_setup_host:
@@ -646,7 +649,56 @@  static int dwcmshc_resume(struct device *dev)
 }
 #endif
 
-static SIMPLE_DEV_PM_OPS(dwcmshc_pmops, dwcmshc_suspend, dwcmshc_resume);
+#ifdef CONFIG_PM
+
+static void dwcmshc_enable_card_clk(struct sdhci_host *host)
+{
+	u16 ctrl;
+
+	ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+	ctrl |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL);
+}
+
+static void dwcmshc_disable_card_clk(struct sdhci_host *host)
+{
+	u16 ctrl;
+
+	ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+	ctrl &= ~SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL);
+}
+
+static int dwcmshc_runtime_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = sdhci_runtime_suspend_host(host);
+	if (!ret)
+		dwcmshc_disable_card_clk(host);
+
+	return ret;
+}
+
+static int dwcmshc_runtime_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	int ret = 0;
+
+	dwcmshc_enable_card_clk(host);
+	ret = sdhci_runtime_resume_host(host, 0);
+
+	return ret;
+}
+
+#endif
+
+static const struct dev_pm_ops dwcmshc_pmops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwcmshc_suspend, dwcmshc_resume)
+	SET_RUNTIME_PM_OPS(dwcmshc_runtime_suspend,
+			   dwcmshc_runtime_resume, NULL)
+};
 
 static struct platform_driver sdhci_dwcmshc_driver = {
 	.driver	= {