diff mbox

[v3,2/9] arm: omap-common: add secure smc entry

Message ID 1467037164-28093-3-git-send-email-dannenberg@ti.com
State New
Headers show

Commit Message

Andreas Dannenberg June 27, 2016, 2:19 p.m. UTC 
From: Daniel Allred <d-allred@ti.com>


Add an interface for calling secure ROM APIs across a range of OMAP and
OMAP compatible high-security (HS) device variants. While at it, also
perform minor cleanup/alignment without any change in functionality.

Signed-off-by: Daniel Allred <d-allred@ti.com>

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>

Reviewed-by: Simon Glass <sjg@chromium.org>

Reviewed-by: Tom Rini <trini@konsulko.com>

---
 arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 45 ++++++++++++++++++++------
 arch/arm/include/asm/omap_common.h             |  6 ++++
 2 files changed, 42 insertions(+), 9 deletions(-)

-- 
2.6.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
diff mbox

Patch

diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 5283135..66a3b3d 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -16,9 +16,10 @@ 
 #include <asm/arch/spl.h>
 #include <linux/linkage.h>
 
+.arch_extension sec
+
 #ifdef CONFIG_SPL
 ENTRY(save_boot_params)
-
 	ldr	r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS
 	str	r0, [r1]
 	b	save_boot_params_ret
@@ -26,14 +27,40 @@  ENDPROC(save_boot_params)
 #endif
 
 ENTRY(omap_smc1)
-	PUSH	{r4-r12, lr}	@ save registers - ROM code may pollute
+	push	{r4-r12, lr}	@ save registers - ROM code may pollute
 				@ our registers
-	MOV	r12, r0		@ Service
-	MOV	r0, r1		@ Argument
-	DSB
-	DMB
-	.word	0xe1600070	@ SMC #0 - hand assembled for GCC versions
-				@ call ROM Code API for the service requested
+	mov	r12, r0		@ Service
+	mov	r0, r1		@ Argument
 
-	POP	{r4-r12, pc}
+	dsb
+	dmb
+	smc	0		@ SMC #0 to enter monitor mode
+				@ call ROM Code API for the service requested
+	pop	{r4-r12, pc}
 ENDPROC(omap_smc1)
+
+ENTRY(omap_smc_sec)
+	push	{r4-r12, lr}	@ save registers - ROM code may pollute
+				@ our registers
+	mov	r6, #0xFF	@ Indicate new Task call
+	mov	r12, #0x00	@ Secure Service ID in R12
+
+	dsb
+	dmb
+	smc	0		@ SMC #0 to enter monitor mode
+
+	b	omap_smc_sec_end @ exit at end of the service execution
+	nop
+
+	@ In case of IRQ happening in Secure, then ARM will branch here.
+	@ At that moment, IRQ will be pending and ARM will jump to Non Secure
+	@ IRQ handler
+	mov	r12, #0xFE
+
+	dsb
+	dmb
+	smc	0		@ SMC #0 to enter monitor mode
+
+omap_smc_sec_end:
+	pop	{r4-r12, pc}
+ENDPROC(omap_smc_sec)
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 07f3848..605c549 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -627,6 +627,12 @@  void recalibrate_iodelay(void);
 
 void omap_smc1(u32 service, u32 val);
 
+/*
+ * Low-level helper function used when performing secure ROM calls on high-
+ * security (HS) device variants by doing a specially-formed smc entry.
+ */
+u32 omap_smc_sec(u32 service, u32 proc_id, u32 flag, u32 *params);
+
 void enable_edma3_clocks(void);
 void disable_edma3_clocks(void);