@@ -79,8 +79,6 @@ struct uart_cpm_port {
void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
struct device_node *np);
void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram);
-int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
-void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
/*
virtual to phys transtalion
@@ -868,6 +868,78 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
setbits16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
}
+/*
+ * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
+ * receive buffer descriptors from dual port ram, and a character
+ * buffer area from host mem. If we are allocating for the console we need
+ * to do it from bootmem
+ */
+static int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
+{
+ int dpmemsz, memsz;
+ u8 __iomem *dp_mem;
+ unsigned long dp_offset;
+ u8 *mem_addr;
+ dma_addr_t dma_addr = 0;
+
+ pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);
+
+ dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
+ dp_offset = cpm_muram_alloc(dpmemsz, 8);
+ if (IS_ERR_VALUE(dp_offset)) {
+ pr_err("%s: could not allocate buffer descriptors\n", __func__);
+ return -ENOMEM;
+ }
+
+ dp_mem = cpm_muram_addr(dp_offset);
+
+ memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
+ L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
+ if (IS_ENABLED(CONFIG_CPM1) && is_con) {
+ /* was hostalloc but changed cause it blows away the */
+ /* large tlb mapping when pinning the kernel area */
+ mem_addr = (u8 __force *)cpm_muram_addr(cpm_muram_alloc(memsz, 8));
+ dma_addr = cpm_muram_dma((void __iomem *)mem_addr);
+ } else if (is_con) {
+ mem_addr = kzalloc(memsz, GFP_NOWAIT);
+ dma_addr = virt_to_bus(mem_addr);
+ } else {
+ mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr,
+ GFP_KERNEL);
+ }
+
+ if (!mem_addr) {
+ cpm_muram_free(dp_offset);
+ pr_err("%s: could not allocate coherent memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ pinfo->dp_addr = dp_offset;
+ pinfo->mem_addr = mem_addr;
+ pinfo->dma_addr = dma_addr;
+ pinfo->mem_size = memsz;
+
+ pinfo->rx_buf = mem_addr;
+ pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
+ * pinfo->rx_fifosize);
+
+ pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem;
+ pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
+
+ return 0;
+}
+
+static void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
+{
+ dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
+ pinfo->rx_fifosize) +
+ L1_CACHE_ALIGN(pinfo->tx_nrfifos *
+ pinfo->tx_fifosize), (void __force *)pinfo->mem_addr,
+ pinfo->dma_addr);
+
+ cpm_muram_free(pinfo->dp_addr);
+}
+
/*
* Initialize port. This is called from early_console stuff
* so we have to be careful here !
@@ -46,72 +46,3 @@ void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
{
iounmap(pram);
}
-
-/*
- * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
- * receive buffer descriptors from dual port ram, and a character
- * buffer area from host mem. If we are allocating for the console we need
- * to do it from bootmem
- */
-int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
-{
- int dpmemsz, memsz;
- u8 *dp_mem;
- unsigned long dp_offset;
- u8 *mem_addr;
- dma_addr_t dma_addr = 0;
-
- pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);
-
- dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
- dp_offset = cpm_dpalloc(dpmemsz, 8);
- if (IS_ERR_VALUE(dp_offset)) {
- printk(KERN_ERR
- "cpm_uart_cpm1.c: could not allocate buffer descriptors\n");
- return -ENOMEM;
- }
- dp_mem = cpm_dpram_addr(dp_offset);
-
- memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
- L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
- if (is_con) {
- /* was hostalloc but changed cause it blows away the */
- /* large tlb mapping when pinning the kernel area */
- mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
- dma_addr = (u32)cpm_dpram_phys(mem_addr);
- } else
- mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr,
- GFP_KERNEL);
-
- if (mem_addr == NULL) {
- cpm_dpfree(dp_offset);
- printk(KERN_ERR
- "cpm_uart_cpm1.c: could not allocate coherent memory\n");
- return -ENOMEM;
- }
-
- pinfo->dp_addr = dp_offset;
- pinfo->mem_addr = mem_addr; /* virtual address*/
- pinfo->dma_addr = dma_addr; /* physical address*/
- pinfo->mem_size = memsz;
-
- pinfo->rx_buf = mem_addr;
- pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
- * pinfo->rx_fifosize);
-
- pinfo->rx_bd_base = (cbd_t __iomem __force *)dp_mem;
- pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
-
- return 0;
-}
-
-void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
-{
- dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
- pinfo->rx_fifosize) +
- L1_CACHE_ALIGN(pinfo->tx_nrfifos *
- pinfo->tx_fifosize), pinfo->mem_addr,
- pinfo->dma_addr);
-
- cpm_dpfree(pinfo->dp_addr);
-}
@@ -80,72 +80,3 @@ void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
if (!IS_SMC(port))
iounmap(pram);
}
-
-/*
- * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
- * receive buffer descriptors from dual port ram, and a character
- * buffer area from host mem. If we are allocating for the console we need
- * to do it from bootmem
- */
-int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
-{
- int dpmemsz, memsz;
- u8 __iomem *dp_mem;
- unsigned long dp_offset;
- u8 *mem_addr;
- dma_addr_t dma_addr = 0;
-
- pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);
-
- dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
- dp_offset = cpm_dpalloc(dpmemsz, 8);
- if (IS_ERR_VALUE(dp_offset)) {
- printk(KERN_ERR
- "cpm_uart_cpm.c: could not allocate buffer descriptors\n");
- return -ENOMEM;
- }
-
- dp_mem = cpm_dpram_addr(dp_offset);
-
- memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
- L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
- if (is_con) {
- mem_addr = kzalloc(memsz, GFP_NOWAIT);
- dma_addr = virt_to_bus(mem_addr);
- }
- else
- mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr,
- GFP_KERNEL);
-
- if (mem_addr == NULL) {
- cpm_dpfree(dp_offset);
- printk(KERN_ERR
- "cpm_uart_cpm.c: could not allocate coherent memory\n");
- return -ENOMEM;
- }
-
- pinfo->dp_addr = dp_offset;
- pinfo->mem_addr = mem_addr;
- pinfo->dma_addr = dma_addr;
- pinfo->mem_size = memsz;
-
- pinfo->rx_buf = mem_addr;
- pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
- * pinfo->rx_fifosize);
-
- pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem;
- pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
-
- return 0;
-}
-
-void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
-{
- dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
- pinfo->rx_fifosize) +
- L1_CACHE_ALIGN(pinfo->tx_nrfifos *
- pinfo->tx_fifosize), (void __force *)pinfo->mem_addr,
- pinfo->dma_addr);
-
- cpm_dpfree(pinfo->dp_addr);
-}
cpm_uart_freebuf() is identical for CPM1 and CPM2. cpm_uart_allocbuf() only has a small difference between CPM1 and CPM2 as shown below: CPM1: if (is_con) { /* was hostalloc but changed cause it blows away the */ /* large tlb mapping when pinning the kernel area */ mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8)); dma_addr = (u32)cpm_dpram_phys(mem_addr); } else mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, GFP_KERNEL); CPM2: if (is_con) { mem_addr = kzalloc(memsz, GFP_NOWAIT); dma_addr = virt_to_bus(mem_addr); } else mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, GFP_KERNEL); Refactor this by using IS_ENABLED(CONFIG_CPM1) and move both functions in cpm_uart_core.c as they are used only there. While doing this, add the necessary casts to silence sparse for the CPM1 part. This is because a dma alloc is not expected to be an iomem but for CPM1 as we use DPRAM this is seen as iomem. Also replace calls to cpm_dpxxxx() by relevant cpm_muram_xxxx() calls. This is needed at least for cpm_dpram_phys() which is only defined for CPM1. Just do the same for all so that cpm_dpxxxx() macros can get droped in the future. To silence checkpatch, replace printk(KERN_ERR by pr_err( and display function name instead of hard coded filename. Also replace mem_addr == NULL by !mem_addr. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> --- drivers/tty/serial/cpm_uart/cpm_uart.h | 2 - drivers/tty/serial/cpm_uart/cpm_uart_core.c | 72 +++++++++++++++++++++ drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c | 69 -------------------- drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c | 69 -------------------- 4 files changed, 72 insertions(+), 140 deletions(-)