| Message ID | TYAP286MB03150B571B67B896A504AC34BC0EA@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM |
|---|---|
| State | New |
| Headers | show |
| Series | wifi: rt2x00: correct MAC_SYS_CTRL register RX mask in R-Calibration | expand |
Shiji Yang <yangshiji66@outlook.com> wrote: > For MAC_SYS_CTRL register, Bit[2] controls MAC_TX_EN and Bit[3] > controls MAC_RX_EN (Bit index starts from 0). Therefore, 0x08 is > the correct mask for RX. > > Signed-off-by: Shiji Yang <yangshiji66@outlook.com> > Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Patch applied to wireless-next.git, thanks. 186f2432741f wifi: rt2x00: correct MAC_SYS_CTRL register RX mask in R-Calibration
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c index ff891353c..28d7b4ea4 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -8583,7 +8583,7 @@ static void rt2800_r_calibration(struct rt2x00_dev *rt2x00dev) rt2x00_warn(rt2x00dev, "Wait MAC Tx Status to MAX !!!\n"); maccfg = rt2800_register_read(rt2x00dev, MAC_SYS_CTRL); - maccfg &= (~0x04); + maccfg &= (~0x08); rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, maccfg); if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY_RX)))
For MAC_SYS_CTRL register, Bit[2] controls MAC_TX_EN and Bit[3] controls MAC_RX_EN (Bit index starts from 0). Therefore, 0x08 is the correct mask for RX. Signed-off-by: Shiji Yang <yangshiji66@outlook.com> --- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)