diff mbox series

[v3,3/5] arm64: dts: ti: k3-j721s2-main: Add C7x remote processsor nodes

Message ID 20230811202252.3586926-4-a-nandan@ti.com
State Accepted
Commit fad9312e432db993ea47947db53dde85462967c1
Headers show
Series Add R5F and C7x DSP nodes for J721S2 SoC. | expand

Commit Message

Apurva Nandan Aug. 11, 2023, 8:22 p.m. UTC 
The K3 J721S2 SoCs have two C71x DSP subsystems in MAIN voltage domain. The
C71x DSPs are 64 bit machine with fixed and floating point DSP operations.
Similar to the R5F remote cores, the inter-processor communication
between the main A72 cores and these DSP cores is achieved through
shared memory and Mailboxes.

The following firmware names are used by default for these DSP cores,
and can be overridden in a board dts file if desired:
        MAIN C71_0 : j721s2-c71_0-fw
        MAIN C71_1 : j721s2-c71_1-fw

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index a8e23b5c6fd5..303e9f124b02 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -1768,4 +1768,30 @@  main_r5fss1_core1: r5f@5f00000 {
 			ti,loczrama = <1>;
 		};
 	};
+
+	c71_0: dsp@64800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x64800000 0x00 0x00080000>,
+		      <0x00 0x64e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <8>;
+		ti,sci-proc-ids = <0x30 0xff>;
+		resets = <&k3_reset 8 1>;
+		firmware-name = "j721s2-c71_0-fw";
+		status = "disabled";
+	};
+
+	c71_1: dsp@65800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x65800000 0x00 0x00080000>,
+		      <0x00 0x65e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <11>;
+		ti,sci-proc-ids = <0x31 0xff>;
+		resets = <&k3_reset 11 1>;
+		firmware-name = "j721s2-c71_1-fw";
+		status = "disabled";
+	};
 };