diff mbox series

[v3,2/7] clk: qcom: clk-hfpll: Configure l_val in init when required

Message ID 20230812112534.8610-3-a39.skl@gmail.com
State Accepted
Commit 500a4609eef46d49a260173b66cabb20bd5159ad
Headers show
Series MSM8976 PLL,RPMPD and DTS changes | expand

Commit Message

Adam Skladowski Aug. 12, 2023, 11:24 a.m. UTC
Add support for pre-configuring default frequency multiplier,
this appears to be required on some platforms like MSM8976.
Without configuring L_VAL device reboots when trying to bring PLL up.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/clk/qcom/clk-hfpll.c | 4 ++++
 drivers/clk/qcom/clk-hfpll.h | 1 +
 2 files changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/drivers/clk/qcom/clk-hfpll.c b/drivers/clk/qcom/clk-hfpll.c
index 86f728dc69e5..705352aff067 100644
--- a/drivers/clk/qcom/clk-hfpll.c
+++ b/drivers/clk/qcom/clk-hfpll.c
@@ -44,6 +44,10 @@  static void __clk_hfpll_init_once(struct clk_hw *hw)
 		regmap_write(regmap, hd->user_reg, regval);
 	}
 
+	/* Write L_VAL from conf if it exist */
+	if (hd->l_val)
+		regmap_write(regmap, hd->l_reg, hd->l_val);
+
 	if (hd->droop_reg)
 		regmap_write(regmap, hd->droop_reg, hd->droop_val);
 
diff --git a/drivers/clk/qcom/clk-hfpll.h b/drivers/clk/qcom/clk-hfpll.h
index 2a57b2fb2f2f..27b9effcb3fd 100644
--- a/drivers/clk/qcom/clk-hfpll.h
+++ b/drivers/clk/qcom/clk-hfpll.h
@@ -18,6 +18,7 @@  struct hfpll_data {
 	u32 status_reg;
 	u8  lock_bit;
 
+	u32 l_val;
 	u32 droop_val;
 	u32 config_val;
 	u32 user_val;