diff mbox series

[3/8] usb: dwc3: exynos: Add support for Exynos850 variant

Message ID 20230819031731.22618-4-semen.protsenko@linaro.org
State New
Headers show
Series arm64: exynos: Enable USB for E850-96 board | expand

Commit Message

Sam Protsenko Aug. 19, 2023, 3:17 a.m. UTC
Add Exynos850 compatible string and associated driver data. Only two
clocks are needed for this SoC:
  - bus_early: bus clock needed for registers access
  - ref: USB 2.0 DRD reference clock (50 MHz)

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
 drivers/usb/dwc3/dwc3-exynos.c | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Krzysztof Kozlowski Aug. 19, 2023, 7:11 a.m. UTC | #1
On 19/08/2023 05:17, Sam Protsenko wrote:
> Add Exynos850 compatible string and associated driver data. Only two
> clocks are needed for this SoC:
>   - bus_early: bus clock needed for registers access
>   - ref: USB 2.0 DRD reference clock (50 MHz)
> 
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> ---
>  drivers/usb/dwc3/dwc3-exynos.c | 9 +++++++++
>  1 file changed, 9 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index f882dd647340..5d365ca51771 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -163,6 +163,12 @@  static const struct dwc3_exynos_driverdata exynos7_drvdata = {
 	.suspend_clk_idx = 1,
 };
 
+static const struct dwc3_exynos_driverdata exynos850_drvdata = {
+	.clk_names = { "bus_early", "ref" },
+	.num_clks = 2,
+	.suspend_clk_idx = -1,
+};
+
 static const struct of_device_id exynos_dwc3_match[] = {
 	{
 		.compatible = "samsung,exynos5250-dwusb3",
@@ -173,6 +179,9 @@  static const struct of_device_id exynos_dwc3_match[] = {
 	}, {
 		.compatible = "samsung,exynos7-dwusb3",
 		.data = &exynos7_drvdata,
+	}, {
+		.compatible = "samsung,exynos850-dwusb3",
+		.data = &exynos850_drvdata,
 	}, {
 	}
 };