| Message ID | 1693909838-6682-3-git-send-email-quic_rohiagar@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add USB Support on Qualcomm's SDX75 Platform | expand |
On 9/6/2023 2:04 AM, Dmitry Baryshkov wrote: > On 05/09/2023 13:30, Rohit Agarwal wrote: >> Add dt-bindings for USB3 PHY found on Qualcomm SDX75. >> >> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> >> --- >> .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 40 >> ++++++++++++++++++++-- >> 1 file changed, 37 insertions(+), 3 deletions(-) >> >> diff --git >> a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml >> b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml >> >> index f99fbbc..5725620 100644 >> --- >> a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml >> +++ >> b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml >> @@ -20,6 +20,7 @@ properties: >> - qcom,qcm2290-qmp-usb3-phy >> - qcom,sa8775p-qmp-usb3-uni-phy >> - qcom,sc8280xp-qmp-usb3-uni-phy >> + - qcom,sdx75-qmp-usb3-uni-phy > > I think the ident is wrong here. Same. Somehow, your reply has the issue but original not able to see. > >> - qcom,sm6115-qmp-usb3-phy >> reg: >> @@ -38,9 +39,7 @@ properties: >> maxItems: 2 >> reset-names: >> - items: >> - - const: phy >> - - const: phy_phy >> + maxItems: 2 >> vdda-phy-supply: true >> @@ -75,6 +74,7 @@ allOf: >> contains: >> enum: >> - qcom,ipq9574-qmp-usb3-phy >> + - qcom,sdx75-qmp-usb3-uni-phy >> then: >> properties: >> clock-names: >> @@ -122,6 +122,40 @@ allOf: >> required: >> - power-domains >> + - if: >> + properties: >> + compatible: >> + contains: >> + enum: >> + - qcom,ipq9574-qmp-usb3-phy >> + - qcom,qcm2290-qmp-usb3-phy >> + - qcom,sa8775p-qmp-usb3-uni-phy >> + - qcom,sc8280xp-qmp-usb3-uni-phy >> + - qcom,sm6115-qmp-usb3-phy >> + then: >> + properties: >> + resets: >> + maxItems: 2 >> + reset-names: >> + items: >> + - const: phy >> + - const: phy_phy >> + >> + - if: >> + properties: >> + compatible: >> + contains: >> + enum: >> + - qcom,sdx75-qmp-usb3-uni-phy >> + then: >> + properties: >> + resets: >> + maxItems: 2 >> + reset-names: >> + items: >> + - const: phy >> + - const: common > > Could you please point us to the actual DTS patch adding this PHY? I'd > say, it is highly likely that you are trying to bring in the > unnecessary change. I have not posted the dt patches yet. But sdx75 uses these resets. GCC_USB3PHY_PHY_BCR, GCC_USB3_PHY_BCR These are same as sdx65 and sdx55. Thanks, Rohit. > >> + >> additionalProperties: false >> examples: >
On 9/6/2023 10:52 AM, Rohit Agarwal wrote: > > On 9/6/2023 2:04 AM, Dmitry Baryshkov wrote: >> On 05/09/2023 13:30, Rohit Agarwal wrote: >>> Add dt-bindings for USB3 PHY found on Qualcomm SDX75. >>> >>> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> >>> --- >>> .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 40 >>> ++++++++++++++++++++-- >>> 1 file changed, 37 insertions(+), 3 deletions(-) >>> >>> diff --git >>> a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml >>> b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml >>> >>> index f99fbbc..5725620 100644 >>> --- >>> a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml >>> +++ >>> b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml >>> @@ -20,6 +20,7 @@ properties: >>> - qcom,qcm2290-qmp-usb3-phy >>> - qcom,sa8775p-qmp-usb3-uni-phy >>> - qcom,sc8280xp-qmp-usb3-uni-phy >>> + - qcom,sdx75-qmp-usb3-uni-phy >> >> I think the ident is wrong here. > > Same. Somehow, your reply has the issue but original not able to see. > >> >>> - qcom,sm6115-qmp-usb3-phy >>> reg: >>> @@ -38,9 +39,7 @@ properties: >>> maxItems: 2 >>> reset-names: >>> - items: >>> - - const: phy >>> - - const: phy_phy >>> + maxItems: 2 >>> vdda-phy-supply: true >>> @@ -75,6 +74,7 @@ allOf: >>> contains: >>> enum: >>> - qcom,ipq9574-qmp-usb3-phy >>> + - qcom,sdx75-qmp-usb3-uni-phy >>> then: >>> properties: >>> clock-names: >>> @@ -122,6 +122,40 @@ allOf: >>> required: >>> - power-domains >>> + - if: >>> + properties: >>> + compatible: >>> + contains: >>> + enum: >>> + - qcom,ipq9574-qmp-usb3-phy >>> + - qcom,qcm2290-qmp-usb3-phy >>> + - qcom,sa8775p-qmp-usb3-uni-phy >>> + - qcom,sc8280xp-qmp-usb3-uni-phy >>> + - qcom,sm6115-qmp-usb3-phy >>> + then: >>> + properties: >>> + resets: >>> + maxItems: 2 >>> + reset-names: >>> + items: >>> + - const: phy >>> + - const: phy_phy >>> + >>> + - if: >>> + properties: >>> + compatible: >>> + contains: >>> + enum: >>> + - qcom,sdx75-qmp-usb3-uni-phy >>> + then: >>> + properties: >>> + resets: >>> + maxItems: 2 >>> + reset-names: >>> + items: >>> + - const: phy >>> + - const: common >> >> Could you please point us to the actual DTS patch adding this PHY? >> I'd say, it is highly likely that you are trying to bring in the >> unnecessary change. > I have not posted the dt patches yet. But sdx75 uses these resets. > GCC_USB3PHY_PHY_BCR, GCC_USB3_PHY_BCR > > These are same as sdx65 and sdx55. Ok I see in your patch https://lore.kernel.org/linux-phy/20230824211952.1397699-17-dmitry.baryshkov@linaro.org/ you are updating the resets name. Fine, this change becomes unnecessary. Will rebase my change on your patches. Thanks, Rohit. > > Thanks, > Rohit. > >> >>> + >>> additionalProperties: false >>> examples: >>
On Wed, 6 Sept 2023 at 08:26, Rohit Agarwal <quic_rohiagar@quicinc.com> wrote: > > > On 9/6/2023 10:52 AM, Rohit Agarwal wrote: > > > > On 9/6/2023 2:04 AM, Dmitry Baryshkov wrote: > >> On 05/09/2023 13:30, Rohit Agarwal wrote: > >>> Add dt-bindings for USB3 PHY found on Qualcomm SDX75. > >>> > >>> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> > >>> --- > >>> .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 40 > >>> ++++++++++++++++++++-- > >>> 1 file changed, 37 insertions(+), 3 deletions(-) > >>> > >>> diff --git > >>> a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml > >>> b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml > >>> > >>> index f99fbbc..5725620 100644 > >>> --- > >>> a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml > >>> +++ > >>> b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml > >>> @@ -20,6 +20,7 @@ properties: > >>> - qcom,qcm2290-qmp-usb3-phy > >>> - qcom,sa8775p-qmp-usb3-uni-phy > >>> - qcom,sc8280xp-qmp-usb3-uni-phy > >>> + - qcom,sdx75-qmp-usb3-uni-phy > >> > >> I think the ident is wrong here. > > > > Same. Somehow, your reply has the issue but original not able to see. > > > >> > >>> - qcom,sm6115-qmp-usb3-phy > >>> reg: > >>> @@ -38,9 +39,7 @@ properties: > >>> maxItems: 2 > >>> reset-names: > >>> - items: > >>> - - const: phy > >>> - - const: phy_phy > >>> + maxItems: 2 > >>> vdda-phy-supply: true > >>> @@ -75,6 +74,7 @@ allOf: > >>> contains: > >>> enum: > >>> - qcom,ipq9574-qmp-usb3-phy > >>> + - qcom,sdx75-qmp-usb3-uni-phy > >>> then: > >>> properties: > >>> clock-names: > >>> @@ -122,6 +122,40 @@ allOf: > >>> required: > >>> - power-domains > >>> + - if: > >>> + properties: > >>> + compatible: > >>> + contains: > >>> + enum: > >>> + - qcom,ipq9574-qmp-usb3-phy > >>> + - qcom,qcm2290-qmp-usb3-phy > >>> + - qcom,sa8775p-qmp-usb3-uni-phy > >>> + - qcom,sc8280xp-qmp-usb3-uni-phy > >>> + - qcom,sm6115-qmp-usb3-phy > >>> + then: > >>> + properties: > >>> + resets: > >>> + maxItems: 2 > >>> + reset-names: > >>> + items: > >>> + - const: phy > >>> + - const: phy_phy > >>> + > >>> + - if: > >>> + properties: > >>> + compatible: > >>> + contains: > >>> + enum: > >>> + - qcom,sdx75-qmp-usb3-uni-phy > >>> + then: > >>> + properties: > >>> + resets: > >>> + maxItems: 2 > >>> + reset-names: > >>> + items: > >>> + - const: phy > >>> + - const: common > >> > >> Could you please point us to the actual DTS patch adding this PHY? > >> I'd say, it is highly likely that you are trying to bring in the > >> unnecessary change. > > I have not posted the dt patches yet. But sdx75 uses these resets. > > GCC_USB3PHY_PHY_BCR, GCC_USB3_PHY_BCR > > > > These are same as sdx65 and sdx55. > Ok I see in your patch > https://lore.kernel.org/linux-phy/20230824211952.1397699-17-dmitry.baryshkov@linaro.org/ > you are updating the resets name. Fine, this change becomes unnecessary. > Will rebase my change on your patches. Well, even without my changes, GCC_USB3PHY_PHY_BCR is "phy_phy", just judging by the name. > > Thanks, > Rohit. > > > > Thanks, > > Rohit. > > > >> > >>> + > >>> additionalProperties: false > >>> examples: > >>
On 9/6/2023 11:09 AM, Dmitry Baryshkov wrote: > On Wed, 6 Sept 2023 at 08:26, Rohit Agarwal <quic_rohiagar@quicinc.com> wrote: >> >> On 9/6/2023 10:52 AM, Rohit Agarwal wrote: >>> On 9/6/2023 2:04 AM, Dmitry Baryshkov wrote: >>>> On 05/09/2023 13:30, Rohit Agarwal wrote: >>>>> Add dt-bindings for USB3 PHY found on Qualcomm SDX75. >>>>> >>>>> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> >>>>> --- >>>>> .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 40 >>>>> ++++++++++++++++++++-- >>>>> 1 file changed, 37 insertions(+), 3 deletions(-) >>>>> >>>>> diff --git >>>>> a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml >>>>> b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml >>>>> >>>>> index f99fbbc..5725620 100644 >>>>> --- >>>>> a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml >>>>> +++ >>>>> b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml >>>>> @@ -20,6 +20,7 @@ properties: >>>>> - qcom,qcm2290-qmp-usb3-phy >>>>> - qcom,sa8775p-qmp-usb3-uni-phy >>>>> - qcom,sc8280xp-qmp-usb3-uni-phy >>>>> + - qcom,sdx75-qmp-usb3-uni-phy >>>> I think the ident is wrong here. >>> Same. Somehow, your reply has the issue but original not able to see. >>> >>>>> - qcom,sm6115-qmp-usb3-phy >>>>> reg: >>>>> @@ -38,9 +39,7 @@ properties: >>>>> maxItems: 2 >>>>> reset-names: >>>>> - items: >>>>> - - const: phy >>>>> - - const: phy_phy >>>>> + maxItems: 2 >>>>> vdda-phy-supply: true >>>>> @@ -75,6 +74,7 @@ allOf: >>>>> contains: >>>>> enum: >>>>> - qcom,ipq9574-qmp-usb3-phy >>>>> + - qcom,sdx75-qmp-usb3-uni-phy >>>>> then: >>>>> properties: >>>>> clock-names: >>>>> @@ -122,6 +122,40 @@ allOf: >>>>> required: >>>>> - power-domains >>>>> + - if: >>>>> + properties: >>>>> + compatible: >>>>> + contains: >>>>> + enum: >>>>> + - qcom,ipq9574-qmp-usb3-phy >>>>> + - qcom,qcm2290-qmp-usb3-phy >>>>> + - qcom,sa8775p-qmp-usb3-uni-phy >>>>> + - qcom,sc8280xp-qmp-usb3-uni-phy >>>>> + - qcom,sm6115-qmp-usb3-phy >>>>> + then: >>>>> + properties: >>>>> + resets: >>>>> + maxItems: 2 >>>>> + reset-names: >>>>> + items: >>>>> + - const: phy >>>>> + - const: phy_phy >>>>> + >>>>> + - if: >>>>> + properties: >>>>> + compatible: >>>>> + contains: >>>>> + enum: >>>>> + - qcom,sdx75-qmp-usb3-uni-phy >>>>> + then: >>>>> + properties: >>>>> + resets: >>>>> + maxItems: 2 >>>>> + reset-names: >>>>> + items: >>>>> + - const: phy >>>>> + - const: common >>>> Could you please point us to the actual DTS patch adding this PHY? >>>> I'd say, it is highly likely that you are trying to bring in the >>>> unnecessary change. >>> I have not posted the dt patches yet. But sdx75 uses these resets. >>> GCC_USB3PHY_PHY_BCR, GCC_USB3_PHY_BCR >>> >>> These are same as sdx65 and sdx55. >> Ok I see in your patch >> https://lore.kernel.org/linux-phy/20230824211952.1397699-17-dmitry.baryshkov@linaro.org/ >> you are updating the resets name. Fine, this change becomes unnecessary. >> Will rebase my change on your patches. > Well, even without my changes, GCC_USB3PHY_PHY_BCR is "phy_phy", just > judging by the name. Yes. Ok. Thanks, Rohit.
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml index f99fbbc..5725620 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml @@ -20,6 +20,7 @@ properties: - qcom,qcm2290-qmp-usb3-phy - qcom,sa8775p-qmp-usb3-uni-phy - qcom,sc8280xp-qmp-usb3-uni-phy + - qcom,sdx75-qmp-usb3-uni-phy - qcom,sm6115-qmp-usb3-phy reg: @@ -38,9 +39,7 @@ properties: maxItems: 2 reset-names: - items: - - const: phy - - const: phy_phy + maxItems: 2 vdda-phy-supply: true @@ -75,6 +74,7 @@ allOf: contains: enum: - qcom,ipq9574-qmp-usb3-phy + - qcom,sdx75-qmp-usb3-uni-phy then: properties: clock-names: @@ -122,6 +122,40 @@ allOf: required: - power-domains + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq9574-qmp-usb3-phy + - qcom,qcm2290-qmp-usb3-phy + - qcom,sa8775p-qmp-usb3-uni-phy + - qcom,sc8280xp-qmp-usb3-uni-phy + - qcom,sm6115-qmp-usb3-phy + then: + properties: + resets: + maxItems: 2 + reset-names: + items: + - const: phy + - const: phy_phy + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdx75-qmp-usb3-uni-phy + then: + properties: + resets: + maxItems: 2 + reset-names: + items: + - const: phy + - const: common + additionalProperties: false examples:
Add dt-bindings for USB3 PHY found on Qualcomm SDX75. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> --- .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 40 ++++++++++++++++++++-- 1 file changed, 37 insertions(+), 3 deletions(-)