| Message ID | 20230905161920.252013-3-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | 08231f1fe620465890554b107032be330d1c66c7 |
| Headers | show |
| Series | arm64: dts: qcom: correct UFS pad supply | expand |
diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts index 90b5f22ea9dc..a49d3ebb1931 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -400,13 +400,13 @@ &ufs_mem_hc { vccq2-supply = <&vreg_l11a>; vcc-max-microamp = <600000>; vccq2-max-microamp = <600000>; + vdd-hba-supply = <&vreg_l18a>; status = "okay"; }; &ufs_mem_phy { vdda-phy-supply = <&vreg_l4a>; vdda-pll-supply = <&vreg_l10a>; - vddp-ref-clk-supply = <&vreg_l18a>; status = "okay"; };
The Qualcomm UFS phy switched from dedicated driver to QMP phy driver. Eventually the old driver was removed in commit 02dca8c981b5 ("phy: qcom: remove ufs qmp phy driver"). The original driver and its binding used vddp-ref-clk regulator supply, but the new one did not and left the supply unused. The Qualcomm UFS phy bindings were also migrated to newer ones and dropped support for vddp-ref-clk regulator in commit dc5cb63592bd ("dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml"). It turns out that this regulator, although with inaccurate name vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or similar, depending on the SoC) used by UFS controller. Bring back handling of this supply by using more appropriate regulator - UFS controller host supply. This also fixes dtbs_check warning: sm6125-xiaomi-laurel-sprout.dtb: phy@4807000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)