diff mbox series

[v4,5/9] arm64: dts : ti: k3-j721s2-som-p0: Add DDR carveout memory nodes for C71x DSPs

Message ID 20230906112422.2846151-6-a-nandan@ti.com
State Accepted
Commit 35fa951c89f6abcb74f73643940b2656c0921353
Headers show
Series [v4,1/9] arm64: dts: ti: k3-j721s2-mcu: Add MCU R5F cluster nodes | expand

Commit Message

Apurva Nandan Sept. 6, 2023, 11:24 a.m. UTC 
Two carveout reserved memory nodes each have been added for each of the
C71x DSP for the TI J721S2 EVM boards. These nodes are assigned to the
respective rproc device nodes as well. The first region will be used as
the DMA pool for the rproc device, and the second region will furnish the
static carveout regions for the firmware memory.

The current carveout addresses and sizes are defined statically for each
device. The C71x DSP processor supports a MMU called CMMU, but is not
currently supported and as such requires the exact memory used by the
firmware to be set-aside.

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 52 ++++++++++++++++++++
 1 file changed, 52 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index 970340ff2c0a..dcad372620b1 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -102,6 +102,30 @@  main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
 			no-map;
 		};
 
+		c71_0_dma_memory_region: c71-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_1_dma_memory_region: c71-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_1_memory_region: c71-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
 		rtos_ipc_memory_region: ipc-memories@a8000000 {
 			reg = <0x00 0xa8000000 0x00 0x01c00000>;
 			alignment = <0x1000>;
@@ -272,6 +296,20 @@  mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
 	};
 };
 
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_1: mbox-c71-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
 &mcu_r5fss0_core0 {
 	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
@@ -307,3 +345,17 @@  &main_r5fss1_core1 {
 	memory-region = <&main_r5fss1_core1_dma_memory_region>,
 			<&main_r5fss1_core1_memory_region>;
 };
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
+
+&c71_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_1>;
+	memory-region = <&c71_1_dma_memory_region>,
+			<&c71_1_memory_region>;
+};