| Message ID | 20230906104744.163479-2-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | 5c72cb3a9a96a5103cba49a1c8f2a2c71b158ab6 |
| Headers | show |
| Series | None | expand |
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index 2c09ce8aeafd..923b40646e81 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -889,8 +889,7 @@ &ufs_mem_hc { vcc-max-microamp = <1300000>; vccq-supply = <&vreg_l1g_1p2>; vccq-max-microamp = <1200000>; - vccq2-supply = <&vreg_l3g_1p2>; - vccq2-max-microamp = <100>; + vdd-hba-supply = <&vreg_l3g_1p2>; status = "okay"; };
According to schematics the VCCQ2 supply is not connected and the L3G regulator instead powers up the controller pads (VDD_PX10). Use correct supply vdd-hba and drop unsupported current limit for the vdd-hba. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)