diff mbox series

[v3] spi: bcm2835: reduce the abuse of the GPIO API

Message ID 20230911161553.24313-1-brgl@bgdev.pl
State New
Headers show
Series [v3] spi: bcm2835: reduce the abuse of the GPIO API | expand

Commit Message

Bartosz Golaszewski Sept. 11, 2023, 4:15 p.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Currently the bcm2835 SPI driver uses functions that are available
exclusively to GPIO providers as a way to handle a platform quirk. Let's
use a slightly better alternative that avoids poking around in GPIOLIB's
internals and use GPIO lookup tables.

Link: https://www.spinics.net/lists/linux-gpio/msg36218.html
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
This is only build-tested. It should work, but it would be great if
someone from broadcom could test this.

Andy pointed out elsewhere that we can use GPIO_LOOKUP() even in
dynamically allocated tables, hence v3.

v1 -> v2:
- don't use devres for managing the GPIO but put it manually in .cleanup()
- add a mailing list link explaining the background of the bug
- fix kerneldoc

v2 -> v3:
- use GPIO_LOOKUP() macro for creating the lookup entry as it looks
  better and results in less LOC

 drivers/spi/spi-bcm2835.c | 60 +++++++++++++++++++++++----------------
 1 file changed, 35 insertions(+), 25 deletions(-)

Comments

Bartosz Golaszewski Sept. 11, 2023, 4:17 p.m. UTC | #1
On Mon, Sep 11, 2023 at 6:15 PM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
>
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> Currently the bcm2835 SPI driver uses functions that are available
> exclusively to GPIO providers as a way to handle a platform quirk. Let's
> use a slightly better alternative that avoids poking around in GPIOLIB's
> internals and use GPIO lookup tables.
>
> Link: https://www.spinics.net/lists/linux-gpio/msg36218.html
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---

Gah, Linus already left his review tag.

For the record:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Mark Brown Sept. 18, 2023, 3:45 p.m. UTC | #2
On Mon, 11 Sep 2023 18:15:53 +0200, Bartosz Golaszewski wrote:
> Currently the bcm2835 SPI driver uses functions that are available
> exclusively to GPIO providers as a way to handle a platform quirk. Let's
> use a slightly better alternative that avoids poking around in GPIOLIB's
> internals and use GPIO lookup tables.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: bcm2835: reduce the abuse of the GPIO API
      commit: 21f252cd29f08892d48739fd7513ad79c1cff96a

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index e7bb2714678a..dfd9c4997052 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -11,6 +11,7 @@ 
  * spi-atmel.c, Copyright (C) 2006 Atmel Corporation
  */
 
+#include <linux/cleanup.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/debugfs.h>
@@ -26,9 +27,10 @@ 
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/gpio/consumer.h>
-#include <linux/gpio/machine.h> /* FIXME: using chip internals */
-#include <linux/gpio/driver.h> /* FIXME: using chip internals */
+#include <linux/gpio/machine.h> /* FIXME: using GPIO lookup tables */
 #include <linux/of_irq.h>
+#include <linux/overflow.h>
+#include <linux/slab.h>
 #include <linux/spi/spi.h>
 
 /* SPI register offsets */
@@ -83,6 +85,7 @@  MODULE_PARM_DESC(polling_limit_us,
  * struct bcm2835_spi - BCM2835 SPI controller
  * @regs: base address of register map
  * @clk: core clock, divided to calculate serial clock
+ * @cs_gpio: chip-select GPIO descriptor
  * @clk_hz: core clock cached speed
  * @irq: interrupt, signals TX FIFO empty or RX FIFO ¾ full
  * @tfr: SPI transfer currently processed
@@ -117,6 +120,7 @@  MODULE_PARM_DESC(polling_limit_us,
 struct bcm2835_spi {
 	void __iomem *regs;
 	struct clk *clk;
+	struct gpio_desc *cs_gpio;
 	unsigned long clk_hz;
 	int irq;
 	struct spi_transfer *tfr;
@@ -1156,15 +1160,11 @@  static void bcm2835_spi_handle_err(struct spi_controller *ctlr,
 	bcm2835_spi_reset_hw(bs);
 }
 
-static int chip_match_name(struct gpio_chip *chip, void *data)
-{
-	return !strcmp(chip->label, data);
-}
-
 static void bcm2835_spi_cleanup(struct spi_device *spi)
 {
 	struct bcm2835_spidev *target = spi_get_ctldata(spi);
 	struct spi_controller *ctlr = spi->controller;
+	struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
 
 	if (target->clear_rx_desc)
 		dmaengine_desc_free(target->clear_rx_desc);
@@ -1175,6 +1175,9 @@  static void bcm2835_spi_cleanup(struct spi_device *spi)
 				 sizeof(u32),
 				 DMA_TO_DEVICE);
 
+	gpiod_put(bs->cs_gpio);
+	spi_set_csgpiod(spi, 0, NULL);
+
 	kfree(target);
 }
 
@@ -1221,7 +1224,7 @@  static int bcm2835_spi_setup(struct spi_device *spi)
 	struct spi_controller *ctlr = spi->controller;
 	struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
 	struct bcm2835_spidev *target = spi_get_ctldata(spi);
-	struct gpio_chip *chip;
+	struct gpiod_lookup_table *lookup __free(kfree) = NULL;
 	int ret;
 	u32 cs;
 
@@ -1288,29 +1291,36 @@  static int bcm2835_spi_setup(struct spi_device *spi)
 	}
 
 	/*
-	 * Translate native CS to GPIO
+	 * TODO: The code below is a slightly better alternative to the utter
+	 * abuse of the GPIO API that I found here before. It creates a
+	 * temporary lookup table, assigns it to the SPI device, gets the GPIO
+	 * descriptor and then releases the lookup table.
 	 *
-	 * FIXME: poking around in the gpiolib internals like this is
-	 * not very good practice. Find a way to locate the real problem
-	 * and fix it. Why is the GPIO descriptor in spi->cs_gpiod
-	 * sometimes not assigned correctly? Erroneous device trees?
+	 * More on the problem that it addresses:
+	 *   https://www.spinics.net/lists/linux-gpio/msg36218.html
 	 */
+	lookup = kzalloc(struct_size(lookup, table, 1), GFP_KERNEL);
+	if (!lookup) {
+		ret = -ENOMEM;
+		goto err_cleanup;
+	}
+
+	lookup->dev_id = dev_name(&spi->dev);
+	lookup->table[0] = GPIO_LOOKUP("pinctrl-bcm2835",
+				       8 - (spi_get_chipselect(spi, 0)),
+				       "cs", GPIO_LOOKUP_FLAGS_DEFAULT);
 
-	/* get the gpio chip for the base */
-	chip = gpiochip_find("pinctrl-bcm2835", chip_match_name);
-	if (!chip)
-		return 0;
-
-	spi_set_csgpiod(spi, 0, gpiochip_request_own_desc(chip,
-							  8 - (spi_get_chipselect(spi, 0)),
-							  DRV_NAME,
-							  GPIO_LOOKUP_FLAGS_DEFAULT,
-							  GPIOD_OUT_LOW));
-	if (IS_ERR(spi_get_csgpiod(spi, 0))) {
-		ret = PTR_ERR(spi_get_csgpiod(spi, 0));
+	gpiod_add_lookup_table(lookup);
+
+	bs->cs_gpio = gpiod_get(&spi->dev, "cs", GPIOD_OUT_LOW);
+	gpiod_remove_lookup_table(lookup);
+	if (IS_ERR(bs->cs_gpio)) {
+		ret = PTR_ERR(bs->cs_gpio);
 		goto err_cleanup;
 	}
 
+	spi_set_csgpiod(spi, 0, bs->cs_gpio);
+
 	/* and set up the "mode" and level */
 	dev_info(&spi->dev, "setting up native-CS%i to use GPIO\n",
 		 spi_get_chipselect(spi, 0));