diff mbox series

[6/6] regulator: qcom_spmi: Add PMA8084 regulators

Message ID 20230912-spmi-pm8909-v1-6-ba4b3bfaf87d@gerhold.net
State Accepted
Commit 317aa3c4fe708fcbee5b9fe5fc25e1b9e92b83f5
Headers show
Series regulator: qcom_spmi: Add PM8909, PM8019 and PMA8084 | expand

Commit Message

Stephan Gerhold Sept. 12, 2023, 7:49 a.m. UTC 
Add the necessary definitions for the PMA8084 PMIC to the
qcom_spmi-regulator driver to allow reading the actual voltages applied
to the hardware at runtime. This is mainly intended for debugging since
the regulators are usually controlled through the RPM firmware (via
qcom_smd-regulator).

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 drivers/regulator/qcom_spmi-regulator.c | 49 +++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
diff mbox series

Patch

diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 13fe1c73a547..fe32fd53f683 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -2359,6 +2359,54 @@  static const struct spmi_regulator_data pm8994_regulators[] = {
 	{ }
 };
 
+static const struct spmi_regulator_data pma8084_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0x1d00, "vdd_s4", },
+	{ "s5", 0x2000, "vdd_s5", },
+	{ "s6", 0x2300, "vdd_s6", },
+	{ "s7", 0x2600, "vdd_s7", },
+	{ "s8", 0x2900, "vdd_s8", },
+	{ "s9", 0x2c00, "vdd_s9", },
+	{ "s10", 0x2f00, "vdd_s10", },
+	{ "s11", 0x3200, "vdd_s11", },
+	{ "s12", 0x3500, "vdd_s12", },
+	{ "l1", 0x4000, "vdd_l1_l11", },
+	{ "l2", 0x4100, "vdd_l2_l3_l4_l27", },
+	{ "l3", 0x4200, "vdd_l2_l3_l4_l27", },
+	{ "l4", 0x4300, "vdd_l2_l3_l4_l27", },
+	{ "l5", 0x4400, "vdd_l5_l7", },
+	{ "l6", 0x4500, "vdd_l6_l12_l14_l15_l26", },
+	{ "l7", 0x4600, "vdd_l5_l7", },
+	{ "l8", 0x4700, "vdd_l8", },
+	{ "l9", 0x4800, "vdd_l9_l10_l13_l20_l23_l24", },
+	{ "l10", 0x4900, "vdd_l9_l10_l13_l20_l23_l24", },
+	{ "l11", 0x4a00, "vdd_l1_l11", },
+	{ "l12", 0x4b00, "vdd_l6_l12_l14_l15_l26", },
+	{ "l13", 0x4c00, "vdd_l9_l10_l13_l20_l23_l24", },
+	{ "l14", 0x4d00, "vdd_l6_l12_l14_l15_l26", },
+	{ "l15", 0x4e00, "vdd_l6_l12_l14_l15_l26", },
+	{ "l16", 0x4f00, "vdd_l16_l25", },
+	{ "l17", 0x5000, "vdd_l17", },
+	{ "l18", 0x5100, "vdd_l18", },
+	{ "l19", 0x5200, "vdd_l19", },
+	{ "l20", 0x5300, "vdd_l9_l10_l13_l20_l23_l24", },
+	{ "l21", 0x5400, "vdd_l21", },
+	{ "l22", 0x5500, "vdd_l22", },
+	{ "l23", 0x5600, "vdd_l9_l10_l13_l20_l23_l24", },
+	{ "l24", 0x5700, "vdd_l9_l10_l13_l20_l23_l24", },
+	{ "l25", 0x5800, "vdd_l16_l25", },
+	{ "l26", 0x5900, "vdd_l6_l12_l14_l15_l26", },
+	{ "l27", 0x5a00, "vdd_l2_l3_l4_l27", },
+	{ "lvs1", 0x8000, "vdd_lvs1_2", },
+	{ "lvs2", 0x8100, "vdd_lvs1_2", },
+	{ "lvs3", 0x8200, "vdd_lvs3_4", },
+	{ "lvs4", 0x8300, "vdd_lvs3_4", },
+	{ "5vs1", 0x8400, "vdd_5vs1", },
+	{ }
+};
+
 static const struct spmi_regulator_data pmi8994_regulators[] = {
 	{ "s1", 0x1400, "vdd_s1", },
 	{ "s2", 0x1700, "vdd_s2", },
@@ -2408,6 +2456,7 @@  static const struct of_device_id qcom_spmi_regulator_match[] = {
 	{ .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators },
 	{ .compatible = "qcom,pm8950-regulators", .data = &pm8950_regulators },
 	{ .compatible = "qcom,pm8994-regulators", .data = &pm8994_regulators },
+	{ .compatible = "qcom,pma8084-regulators", .data = &pma8084_regulators },
 	{ .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators },
 	{ .compatible = "qcom,pmp8074-regulators", .data = &pmp8074_regulators },
 	{ .compatible = "qcom,pms405-regulators", .data = &pms405_regulators },