| Message ID | 20230913185514.21840-1-danila@jiaxyga.com |
|---|---|
| State | Accepted |
| Commit | 4a94b52a47f63fb6db44871f446d31c28ca89bb9 |
| Headers | show |
| Series | arm64: dts: qcom: pm8150l: Add wled node | expand |
On Wed, Sep 13, 2023 at 09:55:14PM +0300, Danila Tikhonov wrote: > WLED is used for controlling the backlight on some boards, add the node > for it. > > Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Regards, Bjorn > --- > arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi > index b1686e5777b8..ac08a09c64c2 100644 > --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi > @@ -132,5 +132,15 @@ pm8150l_lpg: pwm { > status = "disabled"; > }; > > + pm8150l_wled: leds@d800 { > + compatible = "qcom,pm8150l-wled"; > + reg = <0xd800>, <0xd900>; > + interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, > + <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "ovp", "short"; > + label = "backlight"; > + > + status = "disabled"; > + }; > }; > }; > -- > 2.41.0 >
On Wed, 13 Sep 2023 21:55:14 +0300, Danila Tikhonov wrote: > WLED is used for controlling the backlight on some boards, add the node > for it. > > Applied, thanks! [1/1] arm64: dts: qcom: pm8150l: Add wled node commit: 4a94b52a47f63fb6db44871f446d31c28ca89bb9 Best regards,
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index b1686e5777b8..ac08a09c64c2 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -132,5 +132,15 @@ pm8150l_lpg: pwm { status = "disabled"; }; + pm8150l_wled: leds@d800 { + compatible = "qcom,pm8150l-wled"; + reg = <0xd800>, <0xd900>; + interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, + <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp", "short"; + label = "backlight"; + + status = "disabled"; + }; }; };
WLED is used for controlling the backlight on some boards, add the node for it. Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> --- arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)