diff mbox series

[v3,2/3] pmdomain: qcom: rpmpd: Add MSM8917 power domains

Message ID 20230914065422.5452-3-otto.pflueger@abscue.de
State Superseded
Headers show
Series pmdomain: qcom: rpmpd: Add MSM8917 and similar SoCs | expand

Commit Message

Otto Pflüger Sept. 14, 2023, 6:54 a.m. UTC
MSM8917 uses the SMPA2 and LDOA3 regulators provided by the PM8937 PMIC
for the VDDCX and VDDMX power domains in voltage level mode,
respectively. These definitions should also work on MSM8937.

Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
---
 drivers/pmdomain/qcom/rpmpd.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

Comments

Konrad Dybcio Sept. 15, 2023, 1:41 p.m. UTC | #1
On 14.09.2023 08:54, Otto Pflüger wrote:
> MSM8917 uses the SMPA2 and LDOA3 regulators provided by the PM8937 PMIC
> for the VDDCX and VDDMX power domains in voltage level mode,
> respectively. These definitions should also work on MSM8937.
> 
> Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
> ---
Would you mind picking up the RPMPD part of [1] and integrating
QM215 and MSM8917 to use the new bindings?

Konrad

[1] https://lore.kernel.org/linux-arm-msm/1688647793-20950-2-git-send-email-quic_rohiagar@quicinc.com/
diff mbox series

Patch

diff --git a/drivers/pmdomain/qcom/rpmpd.c b/drivers/pmdomain/qcom/rpmpd.c
index 3135dd1dafe0..2980ebd6ed8c 100644
--- a/drivers/pmdomain/qcom/rpmpd.c
+++ b/drivers/pmdomain/qcom/rpmpd.c
@@ -257,6 +257,24 @@  static struct rpmpd mx_l3a_corner_ao = {
 	.key = KEY_CORNER,
 };
 
+static struct rpmpd mx_l3a_lvl_ao;
+static struct rpmpd mx_l3a_lvl = {
+	.pd = { .name = "mx", },
+	.peer = &mx_l3a_lvl_ao,
+	.res_type = RPMPD_LDOA,
+	.res_id = 3,
+	.key = KEY_LEVEL,
+};
+
+static struct rpmpd mx_l3a_lvl_ao = {
+	.pd = { .name = "mx_ao", },
+	.peer = &mx_l3a_lvl,
+	.active_only = true,
+	.res_type = RPMPD_LDOA,
+	.res_id = 3,
+	.key = KEY_LEVEL,
+};
+
 static struct rpmpd mx_l12a_lvl_ao;
 static struct rpmpd mx_l12a_lvl = {
 	.pd = { .name = "mx", },
@@ -572,6 +590,20 @@  static const struct rpmpd_desc msm8916_desc = {
 	.max_state = MAX_CORNER_RPMPD_STATE,
 };
 
+static struct rpmpd *msm8917_rpmpds[] = {
+	[MSM8917_VDDCX] =	&cx_s2a_lvl,
+	[MSM8917_VDDCX_AO] =	&cx_s2a_lvl_ao,
+	[MSM8917_VDDCX_VFL] =	&cx_s2a_vfl,
+	[MSM8917_VDDMX] =	&mx_l3a_lvl,
+	[MSM8917_VDDMX_AO] =	&mx_l3a_lvl_ao,
+};
+
+static const struct rpmpd_desc msm8917_desc = {
+	.rpmpds = msm8917_rpmpds,
+	.num_pds = ARRAY_SIZE(msm8917_rpmpds),
+	.max_state = RPM_SMD_LEVEL_TURBO,
+};
+
 static struct rpmpd *msm8953_rpmpds[] = {
 	[MSM8953_VDDMD] =	&md_s1a_lvl,
 	[MSM8953_VDDMD_AO] =	&md_s1a_lvl_ao,
@@ -764,6 +796,7 @@  static const struct of_device_id rpmpd_match_table[] = {
 	{ .compatible = "qcom,msm8226-rpmpd", .data = &msm8226_desc },
 	{ .compatible = "qcom,msm8909-rpmpd", .data = &msm8916_desc },
 	{ .compatible = "qcom,msm8916-rpmpd", .data = &msm8916_desc },
+	{ .compatible = "qcom,msm8917-rpmpd", .data = &msm8917_desc },
 	{ .compatible = "qcom,msm8939-rpmpd", .data = &msm8939_desc },
 	{ .compatible = "qcom,msm8953-rpmpd", .data = &msm8953_desc },
 	{ .compatible = "qcom,msm8976-rpmpd", .data = &msm8976_desc },