@@ -293,10 +293,9 @@ struct i801_priv {
/*
* If set to true the host controller registers are reserved for
- * ACPI AML use. Protected by acpi_lock.
+ * ACPI AML use.
*/
bool acpi_reserved;
- struct mutex acpi_lock;
};
#define FEATURE_SMBUS_PEC BIT(0)
@@ -874,11 +873,8 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
int hwpec, ret;
struct i801_priv *priv = i2c_get_adapdata(adap);
- mutex_lock(&priv->acpi_lock);
- if (priv->acpi_reserved) {
- mutex_unlock(&priv->acpi_lock);
+ if (priv->acpi_reserved)
return -EBUSY;
- }
pm_runtime_get_sync(&priv->pci_dev->dev);
@@ -919,7 +915,6 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
pm_runtime_mark_last_busy(&priv->pci_dev->dev);
pm_runtime_put_autosuspend(&priv->pci_dev->dev);
- mutex_unlock(&priv->acpi_lock);
return ret;
}
@@ -1571,7 +1566,7 @@ i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
* further access from the driver itself. This device is now owned
* by the system firmware.
*/
- mutex_lock(&priv->acpi_lock);
+ i2c_lock_bus(&priv->adapter, I2C_LOCK_SEGMENT);
if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) {
priv->acpi_reserved = true;
@@ -1591,7 +1586,7 @@ i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
else
status = acpi_os_write_port(address, (u32)*value, bits);
- mutex_unlock(&priv->acpi_lock);
+ i2c_unlock_bus(&priv->adapter, I2C_LOCK_SEGMENT);
return status;
}
@@ -1651,7 +1646,6 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
priv->adapter.dev.parent = &dev->dev;
ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev));
priv->adapter.retries = 3;
- mutex_init(&priv->acpi_lock);
priv->pci_dev = dev;
priv->features = id->driver_data;
I2C core ensures in i2c_smbus_xfer() that the I2C bus lock is held when calling the smbus_xfer callback. That's i801_access() in our case. I think it's safe in general to assume that the I2C bus lock is held when the smbus_xfer callback is called. Therefore I see no need to define an own mutex. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- Patch was part of a broken-up previous series. --- drivers/i2c/busses/i2c-i801.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-)