diff mbox series

[v6,21/36] ARM: dts: qcom: pm8921: reorder nodes

Message ID 20230928110309.1212221-22-dmitry.baryshkov@linaro.org
State Accepted
Commit 0c78700a8aa03a9eb7c0be33803e07ebf146b565
Headers show
Series ARM: dts: qcom: cleanup PMIC usage | expand

Commit Message

Dmitry Baryshkov Sept. 28, 2023, 11:02 a.m. UTC
Move pm8921 device nodes to follow the alphanumberic sorting order.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom/pm8921.dtsi | 48 +++++++++++++++---------------
 1 file changed, 24 insertions(+), 24 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
index ad41d99ab265..4697ca33666f 100644
--- a/arch/arm/boot/dts/qcom/pm8921.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -8,17 +8,14 @@  pm8921: pmic {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pm8921_gpio: gpio@150 {
-
-			compatible = "qcom,pm8921-gpio",
-				     "qcom,ssbi-gpio";
-			reg = <0x150>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			gpio-ranges = <&pm8921_gpio 0 0 44>;
-			#gpio-cells = <2>;
-
+		pwrkey@1c {
+			compatible = "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupt-parent = <&pm8921>;
+			interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+				     <51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
 		};
 
 		pm8921_mpps: mpps@50 {
@@ -32,14 +29,12 @@  pm8921_mpps: mpps@50 {
 			#interrupt-cells = <2>;
 		};
 
-		pwrkey@1c {
-			compatible = "qcom,pm8921-pwrkey";
-			reg = <0x1c>;
+		rtc@11d {
+			compatible = "qcom,pm8921-rtc";
 			interrupt-parent = <&pm8921>;
-			interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-				     <51 IRQ_TYPE_EDGE_RISING>;
-			debounce = <15625>;
-			pull-up;
+			interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+			reg = <0x11d>;
+			allow-set-time;
 		};
 
 		pm8921_keypad: keypad@148 {
@@ -53,12 +48,17 @@  pm8921_keypad: keypad@148 {
 			row-hold = <91500>;
 		};
 
-		rtc@11d {
-			compatible = "qcom,pm8921-rtc";
-			interrupt-parent = <&pm8921>;
-			interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-			reg = <0x11d>;
-			allow-set-time;
+		pm8921_gpio: gpio@150 {
+
+			compatible = "qcom,pm8921-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8921_gpio 0 0 44>;
+			#gpio-cells = <2>;
+
 		};
 
 		pm8921_xoadc: xoadc@197 {