diff mbox series

[1/2] dt-bindings: mfd: qcom,spmi-pmic: Update gpio example

Message ID 20230929-pm7250b-gpio-fixup-v1-1-ef68543c1d3b@fairphone.com
State New
Headers show
Series [1/2] dt-bindings: mfd: qcom,spmi-pmic: Update gpio example | expand

Commit Message

Luca Weiss Sept. 29, 2023, 8:17 a.m. UTC
As per commit ea25d61b448a ("arm64: dts: qcom: Use plural _gpios node
label for PMIC gpios") all dts files now use the plural _gpios instead
of the singular _gpio as label. Update the schema example also to match.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski Sept. 30, 2023, 3:06 p.m. UTC | #1
On 29/09/2023 10:17, Luca Weiss wrote:
> As per commit ea25d61b448a ("arm64: dts: qcom: Use plural _gpios node
> label for PMIC gpios") all dts files now use the plural _gpios instead
> of the singular _gpio as label. Update the schema example also to match.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>  Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> index 55e931ba5b47..e4842e1fbd65 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> @@ -245,7 +245,7 @@ examples:
>              #address-cells = <1>;
>              #size-cells = <0>;
>  
> -            pmi8998_gpio: gpio@c000 {
> +            pmi8998_gpios: gpio@c000 

This does no make sense... you update label only here, but not in any
user of it which proves that label is not used. If it is not used, it
should be dropped, not changed...

Best regards,
Krzysztof
Luca Weiss Oct. 2, 2023, 6:40 a.m. UTC | #2
On Sat Sep 30, 2023 at 5:06 PM CEST, Krzysztof Kozlowski wrote:
> On 29/09/2023 10:17, Luca Weiss wrote:
> > As per commit ea25d61b448a ("arm64: dts: qcom: Use plural _gpios node
> > label for PMIC gpios") all dts files now use the plural _gpios instead
> > of the singular _gpio as label. Update the schema example also to match.
> > 
> > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> > ---
> >  Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> > index 55e931ba5b47..e4842e1fbd65 100644
> > --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> > +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
> > @@ -245,7 +245,7 @@ examples:
> >              #address-cells = <1>;
> >              #size-cells = <0>;
> >  
> > -            pmi8998_gpio: gpio@c000 {
> > +            pmi8998_gpios: gpio@c000 
>
> This does no make sense... you update label only here, but not in any
> user of it which proves that label is not used. If it is not used, it
> should be dropped, not changed...

Okay, I will drop the label instead of updating it in v2.

Regards
Luca

>
> Best regards,
> Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index 55e931ba5b47..e4842e1fbd65 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -245,7 +245,7 @@  examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-            pmi8998_gpio: gpio@c000 {
+            pmi8998_gpios: gpio@c000 {
                 compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
                 reg = <0xc000>;
                 gpio-controller;
@@ -330,7 +330,7 @@  examples:
             };
         };
 
-        pm6150_gpio: gpio@c000 {
+        pm6150_gpios: gpio@c000 {
             compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
             reg = <0xc000>;
             gpio-controller;