diff mbox series

[v6,12/36] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files

Message ID 20230928110309.1212221-13-dmitry.baryshkov@linaro.org
State Accepted
Commit 7b22923c3f504114e3509b0577bbb3a42eb0c49e
Headers show
Series ARM: dts: qcom: cleanup PMIC usage | expand

Commit Message

Dmitry Baryshkov Sept. 28, 2023, 11:02 a.m. UTC
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is
not a property of the SoC, it is a property of the particular board
(even if it is standard and unified between all devices). Move these
interrupt specifications to the board files.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts   | 8 ++++++++
 arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts          | 8 ++++++++
 arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts           | 8 ++++++++
 .../boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts | 8 ++++++++
 arch/arm/boot/dts/qcom/qcom-apq8064.dtsi                  | 4 ----
 5 files changed, 32 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index 0e80a5a8e3c6..b820f3255c16 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -185,6 +185,14 @@  &mdp_dsi1_out {
 	remote-endpoint = <&dsi0_in>;
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &rpm {
 	regulators {
 		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
index d6ecfd8addb7..c01254b1a3a7 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
@@ -69,6 +69,14 @@  &pcie {
 	status = "okay";
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	wlan_default_gpios: wlan-gpios-state {
 		pinconf {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
index 96307550523a..f1bd29333c9b 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -171,6 +171,14 @@  &pcie {
 	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	wlan_default_gpios: wlan-gpios-state {
 		pinconf {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 9244512b74d1..7917f1657025 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -65,6 +65,14 @@  &gsbi5_serial {
 	status = "okay";
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio3", "gpio4", "gpio29", "gpio35";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 6514d728b1ec..76796002bda6 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -662,8 +662,6 @@  ssbi@c00000 {
 
 			pm8821: pmic {
 				compatible = "qcom,pm8821";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				#address-cells = <1>;
@@ -688,8 +686,6 @@  ssbi@500000 {
 
 			pm8921: pmic {
 				compatible = "qcom,pm8921";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <74 8>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				#address-cells = <1>;