diff mbox series

[1/2] watchdog: iTCO_wdt: No need to stop the timer in probe

Message ID a5f4da3744650079ea0fe8f378ae5fc7f37bc1dd.1696230340.git.jan.kiszka@siemens.com
State New
Headers show
Series [1/2] watchdog: iTCO_wdt: No need to stop the timer in probe | expand

Commit Message

Jan Kiszka Oct. 2, 2023, 7:05 a.m. UTC
From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit 1ae3e78c08209ac657c59f6f7ea21bbbd7f6a1d4 upstream.

The watchdog core can handle pinging of the watchdog before userspace
opens the device. For this reason instead of stopping the timer, just
mark it as running and let the watchdog core take care of it.

Cc: Malin Jonsson <malin.jonsson@ericsson.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210921102900.61586-1-mika.westerberg@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
---
 drivers/watchdog/iTCO_wdt.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 347f0389b089..930798bac582 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -401,6 +401,16 @@  static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev)
 	return time_left;
 }
 
+static void iTCO_wdt_set_running(struct iTCO_wdt_private *p)
+{
+	u16 val;
+
+	/* Bit 11: TCO Timer Halt -> 0 = The TCO timer is * enabled */
+	val = inw(TCO1_CNT(p));
+	if (!(val & BIT(11)))
+		set_bit(WDOG_HW_RUNNING, &p->wddev.status);
+}
+
 /*
  *	Kernel Interfaces
  */
@@ -537,8 +547,7 @@  static int iTCO_wdt_probe(struct platform_device *pdev)
 	watchdog_set_drvdata(&p->wddev, p);
 	platform_set_drvdata(pdev, p);
 
-	/* Make sure the watchdog is not running */
-	iTCO_wdt_stop(&p->wddev);
+	iTCO_wdt_set_running(p);
 
 	/* Check that the heartbeat value is within it's range;
 	   if not reset to the default */