diff mbox series

[v11,3/5] arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node

Message ID 20231005101444.229981-2-j-choudhary@ti.com
State New
Headers show
Series Enable Display for J784S4 and AM69-SK platform | expand

Commit Message

Jayesh Choudhary Oct. 5, 2023, 10:14 a.m. UTC
From: Rahul T R <r-ravikumar@ti.com>

Add DSS and DP-bridge node for J784S4 SoC. DSS IP in J784S4 is
same as DSS IP in J721E, so same compatible is being used.
The DP is Cadence MHDP8546.
Disable them by default as nodes are missing port definition
and phy link configurations which are added later in platform
dt file.

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
[j-choudhary@ti.com: move dss & mhdp node together in main, fix dss node]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 71 ++++++++++++++++++++++
 1 file changed, 71 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index e20e26b76ffd..59451b8f063c 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -1773,4 +1773,75 @@  c71_3: dsp@67800000 {
 		firmware-name = "j784s4-c71_3-fw";
 		status = "disabled";
 	};
+
+	mhdp: bridge@a000000 {
+		compatible = "ti,j721e-mhdp8546";
+		reg = <0x0 0xa000000 0x0 0x30a00>,
+		      <0x0 0x4f40000 0x0 0x20>;
+		reg-names = "mhdptx", "j721e-intg";
+		clocks = <&k3_clks 217 11>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 217 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		dp0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Remote-endpoints are on the boards so
+			 * ports are defined in the platform dt file.
+			 */
+		};
+	};
+
+	dss: dss@4a00000 {
+		compatible = "ti,j721e-dss";
+		reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */
+		      <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
+		      <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/
+		      <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/
+		      <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */
+		      <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */
+		      <0x00 0x04a50000 0x00 0x10000>, /* vid1 */
+		      <0x00 0x04a60000 0x00 0x10000>, /* vid2 */
+		      <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */
+		      <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */
+		      <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */
+		      <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */
+		      <0x00 0x04a80000 0x00 0x10000>, /* vp1 */
+		      <0x00 0x04aa0000 0x00 0x10000>, /* vp1 */
+		      <0x00 0x04ac0000 0x00 0x10000>, /* vp1 */
+		      <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */
+		      <0x00 0x04af0000 0x00 0x10000>; /* wb */
+		reg-names = "common_m", "common_s0",
+			    "common_s1", "common_s2",
+			    "vidl1", "vidl2","vid1","vid2",
+			    "ovr1", "ovr2", "ovr3", "ovr4",
+			    "vp1", "vp2", "vp3", "vp4",
+			    "wb";
+		clocks = <&k3_clks 218 0>,
+			 <&k3_clks 218 2>,
+			 <&k3_clks 218 5>,
+			 <&k3_clks 218 14>,
+			 <&k3_clks 218 18>;
+		clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
+		power-domains = <&k3_pds 218 TI_SCI_PD_EXCLUSIVE>;
+		interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "common_m",
+				  "common_s0",
+				  "common_s1",
+				  "common_s2";
+		status = "disabled";
+
+		dss_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Ports that DSS drives are platform specific
+			 * so they are defined in platform dt file.
+			 */
+		};
+	};
 };