diff mbox series

[v4,1/1] opcodes: microblaze: Add new bit-field instructions

Message ID 20231010062039.2021349-1-neal.frager@amd.com
State Superseded
Headers show
Series [v4,1/1] opcodes: microblaze: Add new bit-field instructions | expand

Commit Message

Frager, Neal Oct. 10, 2023, 6:20 a.m. UTC
This patches adds new bsefi and bsifi instructions.
BSEFI- The instruction shall extract a bit field from a
register and place it right-adjusted in the destination register.
The other bits in the destination register shall be set to zero.
BSIFI- The instruction shall insert a right-adjusted bit field
from a register at another position in the destination register.
The rest of the bits in the destination register shall be unchanged.

Further documentation of these instructions can be found here:
https://docs.xilinx.com/v/u/en-US/ug984-vivado-microblaze-ref

This patch has been tested for years of AMD Xilinx Yocto
releases as part of the following patch set:

https://github.com/Xilinx/meta-xilinx/tree/master/meta-microblaze/recipes-devtools/binutils/binutils

Signed-off-by: nagaraju <nagaraju.mekala@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Neal Frager <neal.frager@amd.com>
---
V1->V2:
 -corrected relocation values for the linker
V2->V3:
 - fixed build issue for 32-bit hosts
 - added test cases for bsefi and bsifi instructions
V3->V4:
 - fixed GNU coding standard issues
---
 bfd/bfd-in2.h                          |  5 ++
 bfd/elf32-microblaze.c                 | 80 +++++++++++++++++++++++-
 bfd/libbfd.h                           |  1 +
 bfd/reloc.c                            |  6 ++
 binutils/readelf.c                     |  4 ++
 gas/config/tc-microblaze.c             | 85 +++++++++++++++++++++++++-
 gas/testsuite/gas/microblaze/allinsn.d |  6 ++
 gas/testsuite/gas/microblaze/allinsn.s |  8 +++
 include/elf/microblaze.h               |  1 +
 opcodes/microblaze-dis.c               | 19 ++++++
 opcodes/microblaze-opc.h               | 12 +++-
 opcodes/microblaze-opcm.h              |  6 +-
 12 files changed, 229 insertions(+), 4 deletions(-)

Comments

Frager, Neal Oct. 10, 2023, 7:55 a.m. UTC | #1
Hi Michael,

> static char *
>  get_field_rfsl (struct string_buf *buf, long instr)  { @@ -426,6 +441,10 @@ print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info)
> 	  break;
> 	  /* For mbar 16 or sleep insn.  */
> 	case INST_TYPE_NONE:
> +	  break;
> +	  /* For bit field insns.  */
> +	case INST_TYPE_RD_R1_IMM5_IMM5:
> +	  print_func (stream, "\t%s, %s, %s, %s", get_field_rd (&buf, 
> +inst),get_field_r1(&buf, inst),get_field_imm5width (&buf, inst), 
> +get_field_imm5 (&buf, inst));

I missed this line which is >80 chars.  Please review only v5 of this patch which fixes this.

> 	  break;
> 	  /* For tuqula instruction */
> 	case INST_TYPE_RD:

Best regards,
Neal Frager
AMD
diff mbox series

Patch

diff --git a/bfd/bfd-in2.h b/bfd/bfd-in2.h
index eddb9902f5e..468e14af262 100644
--- a/bfd/bfd-in2.h
+++ b/bfd/bfd-in2.h
@@ -6461,6 +6461,11 @@  value relative to the read-write small data area anchor  */
 expressions of the form "Symbol Op Symbol"  */
   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM,
 
+/* This is a 32 bit reloc that stores the 32 bit pc relative
+value in two words (with an imm instruction).No relocation is 
+done here - only used for relaxing  */
+  BFD_RELOC_MICROBLAZE_32_NONE,
+
 /* This is a 64 bit reloc that stores the 32 bit pc relative
 value in two words (with an imm instruction).  No relocation is
 done here - only used for relaxing  */
diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c
index a7e81c70fc8..28bcd9957ed 100644
--- a/bfd/elf32-microblaze.c
+++ b/bfd/elf32-microblaze.c
@@ -174,6 +174,21 @@  static reloc_howto_type microblaze_elf_howto_raw[] =
 	  0x0000ffff,		/* Dest Mask.  */
 	  false),		/* PC relative offset?  */
 
+   /* This reloc does nothing.	Used for relaxation.  */
+   HOWTO (R_MICROBLAZE_32_NONE,	/* Type.  */
+	0,			/* Rightshift.  */
+	2,			/* Size (0 = byte, 1 = short, 2 = long).  */
+	32,			/* Bitsize.  */
+	true,			/* PC_relative.  */
+	0,			/* Bitpos.  */
+	complain_overflow_bitfield,  /* Complain on overflow.  */
+	NULL,			/* Special Function.  */
+	"R_MICROBLAZE_32_NONE",  /* Name.  */
+	false,			/* Partial Inplace.  */
+	0,			/* Source Mask.  */
+	0,			/* Dest Mask.  */
+	false),		/* PC relative offset?  */
+
    /* This reloc does nothing.	Used for relaxation.  */
    HOWTO (R_MICROBLAZE_64_NONE,	/* Type.  */
 	  0,			/* Rightshift.  */
@@ -560,6 +575,9 @@  microblaze_elf_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED,
     case BFD_RELOC_NONE:
       microblaze_reloc = R_MICROBLAZE_NONE;
       break;
+    case BFD_RELOC_MICROBLAZE_32_NONE:
+      microblaze_reloc = R_MICROBLAZE_32_NONE;
+      break;
     case BFD_RELOC_MICROBLAZE_64_NONE:
       microblaze_reloc = R_MICROBLAZE_64_NONE;
       break;
@@ -1954,14 +1972,25 @@  microblaze_elf_relax_section (bfd *abfd,
 		}
 	      break;
 	    case R_MICROBLAZE_NONE:
+	    case R_MICROBLAZE_32_NONE:
 	      {
 		/* This was a PC-relative instruction that was
 		   completely resolved.  */
 		size_t sfix, efix;
+		unsigned int val;
 		bfd_vma target_address;
 		target_address = irel->r_addend + irel->r_offset;
 		sfix = calc_fixup (irel->r_offset, 0, sec);
 		efix = calc_fixup (target_address, 0, sec);
+		
+		/* Validate the in-band val.  */
+		val = bfd_get_32 (abfd, contents + irel->r_offset);
+		if (val != irel->r_addend &&
+		    ELF32_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE)
+		  {
+			fprintf (stderr, "%d: CORRUPT relax reloc %x %llx\n",
+				__LINE__, val, (long long) irel->r_addend);
+		  }
 		irel->r_addend -= (efix - sfix);
 		/* Should use HOWTO.  */
 		microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset,
@@ -2009,6 +2038,55 @@  microblaze_elf_relax_section (bfd *abfd,
 	  irelscanend = irelocs + o->reloc_count;
 	  for (irelscan = irelocs; irelscan < irelscanend; irelscan++)
 	    {
+	      if (ELF32_R_TYPE (irelscan->r_info) ==
+	          (int) R_MICROBLAZE_32_NONE)
+		{
+		  unsigned int val;
+
+		  isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
+
+		  /* hax: We only do the following fixup 
+		  for debug location lists.  */
+		  if (strcmp(".debug_loc", o->name))
+		    continue;
+
+		  /* This was a PC-relative instruction 
+		  that was completely resolved.  */
+		  if (ocontents == NULL)
+		    {
+			if (elf_section_data (o)->this_hdr.contents != NULL)
+			  ocontents = elf_section_data (o)->this_hdr.contents;
+			else
+			  {
+			    /* We always cache the section contents.
+			    Perhaps, if info->keep_memory is FALSE, we
+			    should free them, if we are permitted to.  */
+			    if (o->rawsize == 0)
+				o->rawsize = o->size;
+			    ocontents = (bfd_byte *) bfd_malloc (o->rawsize);
+			    if (ocontents == NULL)
+				goto error_return;
+			    if (!bfd_get_section_contents (abfd, o, ocontents,
+							    (file_ptr) 0,
+							    o->rawsize))
+				goto error_return;
+			    elf_section_data (o)->this_hdr.contents =
+			    				    ocontents;
+			  }
+		    }		
+
+		  val = bfd_get_32 (abfd, ocontents + irelscan->r_offset);
+		  if (val != irelscan->r_addend)
+		    fprintf (stderr, "%d: CORRUPT relax reloc! %x %llx\n",
+			    __LINE__, val, (long long) irelscan->r_addend);
+
+		  irelscan->r_addend -= calc_fixup (irelscan->r_addend,
+		  				    0, sec);
+		  microblaze_bfd_write_imm_value_32 (abfd, ocontents +
+		  				    irelscan->r_offset,
+						    irelscan->r_addend);
+		}
+		
 	      if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32)
 		{
 		  isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
@@ -2068,7 +2146,7 @@  microblaze_elf_relax_section (bfd *abfd,
 			      elf_section_data (o)->this_hdr.contents = ocontents;
 			    }
 			}
-		      irelscan->r_addend -= calc_fixup (irel->r_addend
+		      irelscan->r_addend -= calc_fixup (irelscan->r_addend
 							+ isym->st_value,
 							0,
 							sec);
diff --git a/bfd/libbfd.h b/bfd/libbfd.h
index d5f42f22c08..d729dc48e7c 100644
--- a/bfd/libbfd.h
+++ b/bfd/libbfd.h
@@ -3010,6 +3010,7 @@  static const char *const bfd_reloc_code_real_names[] = { "@@uninitialized@@",
   "BFD_RELOC_MICROBLAZE_32_ROSDA",
   "BFD_RELOC_MICROBLAZE_32_RWSDA",
   "BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM",
+  "BFD_RELOC_MICROBLAZE_32_NONE",
   "BFD_RELOC_MICROBLAZE_64_NONE",
   "BFD_RELOC_MICROBLAZE_64_GOTPC",
   "BFD_RELOC_MICROBLAZE_64_GOT",
diff --git a/bfd/reloc.c b/bfd/reloc.c
index 2ac883d0eac..3ea2afc0d4e 100644
--- a/bfd/reloc.c
+++ b/bfd/reloc.c
@@ -6694,6 +6694,12 @@  ENUM
 ENUMDOC
   This is a 32 bit reloc for the microblaze to handle
   expressions of the form "Symbol Op Symbol"
+ENUM
+  BFD_RELOC_MICROBLAZE_32_NONE
+ENUMDOC
+  This is a 32 bit reloc that stores the 32 bit pc relative
+  value in two words (with an imm instruction).  No relocation is
+  done here - only used for relaxing
 ENUM
   BFD_RELOC_MICROBLAZE_64_NONE
 ENUMDOC
diff --git a/binutils/readelf.c b/binutils/readelf.c
index c9b6210e229..17fd7066b83 100644
--- a/binutils/readelf.c
+++ b/binutils/readelf.c
@@ -15279,6 +15279,10 @@  is_8bit_abs_reloc (Filedata * filedata, unsigned int reloc_type)
       return reloc_type == 54; /* R_RISCV_SET8.  */
     case EM_Z80:
       return reloc_type == 1;  /* R_Z80_8.  */
+    case EM_MICROBLAZE:
+      return reloc_type == 33 /* R_MICROBLAZE_32_NONE.  */
+		|| reloc_type == 0 /* R_MICROBLAZE_NONE.  */
+		|| reloc_type == 9; /* R_MICROBLAZE_64_NONE.  */
     default:
       return false;
     }
diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
index d900a9e1d05..48f5bbf6f7a 100644
--- a/gas/config/tc-microblaze.c
+++ b/gas/config/tc-microblaze.c
@@ -915,7 +915,7 @@  md_assemble (char * str)
   unsigned reg2;
   unsigned reg3;
   unsigned isize;
-  unsigned int immed = 0, temp;
+  unsigned int immed = 0, immed2 = 0, temp;
   expressionS exp;
   char name[20];
 
@@ -1177,6 +1177,85 @@  md_assemble (char * str)
       inst |= (immed << IMM_LOW) & IMM5_MASK;
       break;
 
+    case INST_TYPE_RD_R1_IMM5_IMM5:
+      if (strcmp (op_end, ""))
+	op_end = parse_reg (op_end + 1, &reg1);  /* Get rd.  */
+      else
+	{
+	  as_fatal (_("Error in statement syntax"));
+	  reg1 = 0;
+	}
+      if (strcmp (op_end, ""))
+	op_end = parse_reg (op_end + 1, &reg2);  /* Get r1.  */
+      else
+	{
+	  as_fatal (_("Error in statement syntax"));
+	  reg2 = 0;
+	}
+
+      /* Check for spl registers.  */
+      if (check_spl_reg (&reg1))
+	as_fatal (_("Cannot use special register with this instruction"));
+      if (check_spl_reg (&reg2))
+	as_fatal (_("Cannot use special register with this instruction"));
+
+      /* Width immediate value.  */
+      if (strcmp (op_end, ""))
+	op_end = parse_imm (op_end + 1, &exp, MIN_IMM_WIDTH, MAX_IMM_WIDTH);
+      else
+	as_fatal (_("Error in statement syntax"));
+
+      if (exp.X_op != O_constant)
+	{
+	  as_warn (_(
+	  "Symbol used as immediate width value for bit field instruction"));
+	  immed = 1;
+	}
+      else
+	immed = exp.X_add_number;
+
+      if (opcode->instr == bsefi && immed > 31)
+	as_fatal (_("Width value must be less than 32"));
+
+      /* Shift immediate value.  */
+      if (strcmp (op_end, ""))
+	op_end = parse_imm (op_end + 1, &exp, MIN_IMM, MAX_IMM);
+      else
+	as_fatal (_("Error in statement syntax"));
+
+      if (exp.X_op != O_constant)
+	{
+	  as_warn (_(
+	  "Symbol used as immediate shift value for bit field instruction"));
+	  immed2 = 0;
+	}
+      else
+	{
+	  output = frag_more (isize);
+	  immed2 = exp.X_add_number;
+	}
+
+      if (immed2 != (immed2 % 32))
+	{
+	  as_warn (_("Shift value greater than 32. using <value %% 32>"));
+	  immed2 = immed2 % 32;
+	}
+
+      /* Check combined value.  */
+      if (immed + immed2 > 32)
+	as_fatal (_("Width value + shift value must not be greater than 32"));
+
+      inst |= (reg1 << RD_LOW) & RD_MASK;
+      inst |= (reg2 << RA_LOW) & RA_MASK;
+
+      if (opcode->instr == bsefi)
+	inst |= (immed & IMM5_MASK) << IMM_WIDTH_LOW; /* bsefi */
+      else
+	inst |= ((immed + immed2 - 1) & IMM5_MASK) << IMM_WIDTH_LOW; /* bsifi */
+
+      inst |= (immed2 << IMM_LOW) & IMM5_MASK;
+      break;
+
     case INST_TYPE_R1_R2:
       if (strcmp (op_end, ""))
         op_end = parse_reg (op_end + 1, &reg1);  /* Get r1.  */
@@ -2209,9 +2288,12 @@  md_apply_fix (fixS *   fixP,
 	 moves code around due to relaxing.  */
       if (fixP->fx_r_type == BFD_RELOC_64_PCREL)
 	fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE;
+      else if (fixP->fx_r_type == BFD_RELOC_32)
+	fixP->fx_r_type = BFD_RELOC_MICROBLAZE_32_NONE;
       else
 	fixP->fx_r_type = BFD_RELOC_NONE;
       fixP->fx_addsy = section_symbol (absolute_section);
+      fixP->fx_done = 0;
     }
   return;
 }
@@ -2432,6 +2514,7 @@  tc_gen_reloc (asection * section ATTRIBUTE_UNUSED, fixS * fixp)
   switch (fixp->fx_r_type)
     {
     case BFD_RELOC_NONE:
+    case BFD_RELOC_MICROBLAZE_32_NONE:
     case BFD_RELOC_MICROBLAZE_64_NONE:
     case BFD_RELOC_32:
     case BFD_RELOC_MICROBLAZE_32_LO:
diff --git a/gas/testsuite/gas/microblaze/allinsn.d b/gas/testsuite/gas/microblaze/allinsn.d
index b454fdb30fc..fddba3853c1 100644
--- a/gas/testsuite/gas/microblaze/allinsn.d
+++ b/gas/testsuite/gas/microblaze/allinsn.d
@@ -47,3 +47,9 @@  Disassembly of section .text:
 
 00000040 <swaph>:
   40:	900001e2 	swaph	r0, r0
+
+00000044 <bsefi>:
+  44:   64004000 	bsefi	r0, r0
+  
+00000048 <bsifi>:
+  48:   64008000	bsifi	r0, r0
diff --git a/gas/testsuite/gas/microblaze/allinsn.s b/gas/testsuite/gas/microblaze/allinsn.s
index ffe91ca8eb0..89deeae97e9 100644
--- a/gas/testsuite/gas/microblaze/allinsn.s
+++ b/gas/testsuite/gas/microblaze/allinsn.s
@@ -54,4 +54,12 @@  swapb:
     .global swaph
 swaph:
     swaph r0,r0
+    .text
+    .global bsefi
+bsefi:
+    bsefi r0,r0
+    .text
+    .global bsifi
+bsifi:
+    bsifi r0,r0
 
diff --git a/include/elf/microblaze.h b/include/elf/microblaze.h
index fecdd7e4831..164b36d0978 100644
--- a/include/elf/microblaze.h
+++ b/include/elf/microblaze.h
@@ -61,6 +61,7 @@  START_RELOC_NUMBERS (elf_microblaze_reloc_type)
   RELOC_NUMBER (R_MICROBLAZE_TEXTPCREL_64, 30)  /* PC-relative TEXT offset.  */
   RELOC_NUMBER (R_MICROBLAZE_TEXTREL_64, 31)    /* TEXT Entry offset 64-bit.  */
   RELOC_NUMBER (R_MICROBLAZE_TEXTREL_32_LO, 32) /* TEXT Entry offset 32-bit.  */
+  RELOC_NUMBER (R_MICROBLAZE_32_NONE, 33)
 END_RELOC_NUMBERS (R_MICROBLAZE_max)
 
 /* Global base address names.  */
diff --git a/opcodes/microblaze-dis.c b/opcodes/microblaze-dis.c
index 12981abfea1..81e3f99802f 100644
--- a/opcodes/microblaze-dis.c
+++ b/opcodes/microblaze-dis.c
@@ -90,6 +90,21 @@  get_field_imm5_mbar (struct string_buf *buf, long instr)
   return p;
 }
 
+static char *
+get_field_imm5width (struct string_buf *buf, long instr)
+{
+  char *p = strbuf (buf);
+
+  if (instr & 0x00004000)
+    sprintf (p, "%d",
+	(short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW))); /* bsefi */
+  else
+    sprintf (p, "%d",
+	(short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW) -
+		((instr & IMM5_MASK) >> IMM_LOW) + 1)); /* bsifi */
+  return p;
+}
+
 static char *
 get_field_rfsl (struct string_buf *buf, long instr)
 {
@@ -426,6 +441,10 @@  print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info)
 	  break;
 	  /* For mbar 16 or sleep insn.  */
 	case INST_TYPE_NONE:
+	  break;
+	  /* For bit field insns.  */
+	case INST_TYPE_RD_R1_IMM5_IMM5:
+	  print_func (stream, "\t%s, %s, %s, %s", get_field_rd (&buf, inst),get_field_r1(&buf, inst),get_field_imm5width (&buf, inst), get_field_imm5 (&buf, inst));
 	  break;
 	  /* For tuqula instruction */
 	case INST_TYPE_RD:
diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h
index 7398e9e246a..c736998f0bd 100644
--- a/opcodes/microblaze-opc.h
+++ b/opcodes/microblaze-opc.h
@@ -59,6 +59,9 @@ 
 /* For mbar.  */
 #define INST_TYPE_IMM5 20
 
+/* For bsefi and bsifi */
+#define INST_TYPE_RD_R1_IMM5_IMM5  21
+
 #define INST_TYPE_NONE 25
 
 
@@ -89,7 +92,9 @@ 
 #define OPCODE_MASK_H124  0xFFFF07FF /* High 16, and low 11 bits.  */
 #define OPCODE_MASK_H1234 0xFFFFFFFF /* All 32 bits.  */
 #define OPCODE_MASK_H3    0xFC000600 /* High 6 bits and bits 21, 22.  */
+#define OPCODE_MASK_H3B   0xFC00C600 /* High 6 bits and bits 16, 17, 21, 22. */
 #define OPCODE_MASK_H32   0xFC00FC00 /* High 6 bits and bit 16-21.  */
+#define OPCODE_MASK_H32B  0xFC00C000 /* High 6 bits and bit 16, 17.  */
 #define OPCODE_MASK_H34B  0xFC0000FF /* High 6 bits and low 8 bits.  */
 #define OPCODE_MASK_H35B  0xFC0004FF /* High 6 bits and low 9 bits.  */
 #define OPCODE_MASK_H34C  0xFC0007E0 /* High 6 bits and bits 21-26.  */
@@ -102,7 +107,7 @@ 
 #define DELAY_SLOT 1
 #define NO_DELAY_SLOT 0
 
-#define MAX_OPCODES 300
+#define MAX_OPCODES 301
 
 const struct op_code_struct
 {
@@ -159,6 +164,8 @@  const struct op_code_struct
   {"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3, bslli, barrel_shift_inst },
   {"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3, bsrai, barrel_shift_inst },
   {"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3, bsrli, barrel_shift_inst },
+  {"bsefi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst },
+  {"bsifi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst },
   {"or",    INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000000, OPCODE_MASK_H4, microblaze_or, logical_inst },
   {"and",   INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x84000000, OPCODE_MASK_H4, microblaze_and, logical_inst },
   {"xor",   INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x88000000, OPCODE_MASK_H4, microblaze_xor, logical_inst },
@@ -438,5 +445,8 @@  char pvr_register_prefix[] = "rpvr";
 #define MIN_IMM5  ((int) 0x00000000)
 #define MAX_IMM5  ((int) 0x0000001f)
 
+#define MIN_IMM_WIDTH  ((int) 0x00000001)
+#define MAX_IMM_WIDTH  ((int) 0x00000020)
+
 #endif /* MICROBLAZE_OPC */
 
diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h
index c91b002d951..3c4f8948c76 100644
--- a/opcodes/microblaze-opcm.h
+++ b/opcodes/microblaze-opcm.h
@@ -29,7 +29,7 @@  enum microblaze_instr
   addi, rsubi, addic, rsubic, addik, rsubik, addikc, rsubikc, mul,
   mulh, mulhu, mulhsu, swapb, swaph,
   idiv, idivu, bsll, bsra, bsrl, get, put, nget, nput, cget, cput,
-  ncget, ncput, muli, bslli, bsrai, bsrli, mului,
+  ncget, ncput, muli, bslli, bsrai, bsrli, bsefi, bsifi, mului,
   /* 'or/and/xor' are C++ keywords.  */
   microblaze_or, microblaze_and, microblaze_xor,
   andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16,
@@ -130,6 +130,7 @@  enum microblaze_instr_type
 #define RB_LOW  11 /* Low bit for RB.  */
 #define IMM_LOW  0 /* Low bit for immediate.  */
 #define IMM_MBAR 21 /* low bit for mbar instruction.  */
+#define IMM_WIDTH_LOW 6 /* Low bit for immediate width */
 
 #define RD_MASK 0x03E00000
 #define RA_MASK 0x001F0000
@@ -142,6 +143,9 @@  enum microblaze_instr_type
 /* Imm mask for mbar.  */
 #define IMM5_MBAR_MASK 0x03E00000
 
+/* Imm mask for extract/insert width. */
+#define IMM5_WIDTH_MASK 0x000007C0
+
 /* FSL imm mask for get, put instructions.  */
 #define  RFSL_MASK 0x000000F