diff mbox series

[v6,05/14] firmware: scmi: framework for installing additional protocols

Message ID 20231011100707.1007417-6-takahiro.akashi@linaro.org
State Accepted
Commit 55de62baa1119e8a88e9bfc78705ebff498b0e88
Headers show
Series firmware: scmi: add SCMI base protocol support | expand

Commit Message

AKASHI Takahiro Oct. 11, 2023, 10:06 a.m. UTC
This framework allows SCMI protocols to be installed and bound to the agent
so that the agent can manage and utilize them later.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>
---
v6
* remove global 'scmi_agent' variable which is never used
v4
* remove 'agent' variable as it should be added in the following commit
v3
* move "per_device_plat_auto" from a earlier patch
* fix comments in "scmi_agent_priv"
* modify an order of include files in scmi_agent.h
v2
* check for availability of protocols
---
 drivers/firmware/scmi/scmi_agent-uclass.c | 91 ++++++++++++++++++++++-
 include/scmi_agent-uclass.h               | 15 +++-
 include/scmi_agent.h                      | 14 ++++
 3 files changed, 116 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/firmware/scmi/scmi_agent-uclass.c b/drivers/firmware/scmi/scmi_agent-uclass.c
index 1fa1e9eef966..b4d008835180 100644
--- a/drivers/firmware/scmi/scmi_agent-uclass.c
+++ b/drivers/firmware/scmi/scmi_agent-uclass.c
@@ -38,6 +38,80 @@  static const struct error_code scmi_linux_errmap[] = {
 	{ .scmi = SCMI_PROTOCOL_ERROR, .errno = -EPROTO, },
 };
 
+struct udevice *scmi_get_protocol(struct udevice *dev,
+				  enum scmi_std_protocol id)
+{
+	struct scmi_agent_priv *priv;
+	struct udevice *proto;
+
+	priv = dev_get_uclass_plat(dev);
+	if (!priv) {
+		dev_err(dev, "No priv data found\n");
+		return NULL;
+	}
+
+	switch (id) {
+	case SCMI_PROTOCOL_ID_CLOCK:
+		proto = priv->clock_dev;
+		break;
+	case SCMI_PROTOCOL_ID_RESET_DOMAIN:
+		proto = priv->resetdom_dev;
+		break;
+	case SCMI_PROTOCOL_ID_VOLTAGE_DOMAIN:
+		proto = priv->voltagedom_dev;
+		break;
+	default:
+		dev_err(dev, "Protocol not supported\n");
+		proto = NULL;
+		break;
+	}
+	if (proto && device_probe(proto))
+		dev_err(dev, "Probe failed\n");
+
+	return proto;
+}
+
+/**
+ * scmi_add_protocol - add protocol to agent
+ * @dev:	SCMI agent device
+ * @proto_id:	SCMI protocol ID
+ * @proto:	SCMI protocol device
+ *
+ * Associate the protocol instance, @proto, to the agent, @dev,
+ * for later use.
+ *
+ * Return:	0 on success, error code on failure
+ */
+static int scmi_add_protocol(struct udevice *dev,
+			     enum scmi_std_protocol proto_id,
+			     struct udevice *proto)
+{
+	struct scmi_agent_priv *priv;
+
+	priv = dev_get_uclass_plat(dev);
+	if (!priv) {
+		dev_err(dev, "No priv data found\n");
+		return -ENODEV;
+	}
+
+	switch (proto_id) {
+	case SCMI_PROTOCOL_ID_CLOCK:
+		priv->clock_dev = proto;
+		break;
+	case SCMI_PROTOCOL_ID_RESET_DOMAIN:
+		priv->resetdom_dev = proto;
+		break;
+	case SCMI_PROTOCOL_ID_VOLTAGE_DOMAIN:
+		priv->voltagedom_dev = proto;
+		break;
+	default:
+		dev_err(dev, "Protocol not supported\n");
+		return -EPROTO;
+	}
+
+	return 0;
+}
+
 int scmi_to_linux_errno(s32 scmi_code)
 {
 	int n;
@@ -168,9 +242,10 @@  static int scmi_bind_protocols(struct udevice *dev)
 	int ret = 0;
 	ofnode node;
 	const char *name;
+	struct driver *drv;
+	struct udevice *proto;
 
 	dev_for_each_subnode(node, dev) {
-		struct driver *drv = NULL;
 		u32 protocol_id;
 
 		if (!ofnode_is_enabled(node))
@@ -179,6 +254,7 @@  static int scmi_bind_protocols(struct udevice *dev)
 		if (ofnode_read_u32(node, "reg", &protocol_id))
 			continue;
 
+		drv = NULL;
 		name = ofnode_get_name(node);
 		switch (protocol_id) {
 		case SCMI_PROTOCOL_ID_CLOCK:
@@ -209,9 +285,17 @@  static int scmi_bind_protocols(struct udevice *dev)
 			continue;
 		}
 
-		ret = device_bind(dev, drv, name, NULL, node, NULL);
-		if (ret)
+		ret = device_bind(dev, drv, name, NULL, node, &proto);
+		if (ret) {
+			dev_err(dev, "failed to bind %s protocol\n", drv->name);
 			break;
+		}
+		ret = scmi_add_protocol(dev, protocol_id, proto);
+		if (ret) {
+			dev_err(dev, "failed to add protocol: %s, ret: %d\n",
+				proto->name, ret);
+			break;
+		}
 	}
 
 	return ret;
@@ -221,5 +305,6 @@  UCLASS_DRIVER(scmi_agent) = {
 	.id		= UCLASS_SCMI_AGENT,
 	.name		= "scmi_agent",
 	.post_bind	= scmi_bind_protocols,
+	.per_device_plat_auto = sizeof(struct scmi_agent_priv),
 	.per_child_auto	= sizeof(struct scmi_agent_proto_priv),
 };
diff --git a/include/scmi_agent-uclass.h b/include/scmi_agent-uclass.h
index eee46c880a56..258aa0f37596 100644
--- a/include/scmi_agent-uclass.h
+++ b/include/scmi_agent-uclass.h
@@ -5,10 +5,23 @@ 
 #ifndef _SCMI_AGENT_UCLASS_H
 #define _SCMI_AGENT_UCLASS_H
 
-struct udevice;
+#include <dm/device.h>
+
 struct scmi_msg;
 struct scmi_channel;
 
+/**
+ * struct scmi_agent_priv - private data maintained by agent instance
+ * @clock_dev:		SCMI clock protocol device
+ * @resetdom_dev:	SCMI reset domain protocol device
+ * @voltagedom_dev:	SCMI voltage domain protocol device
+ */
+struct scmi_agent_priv {
+	struct udevice *clock_dev;
+	struct udevice *resetdom_dev;
+	struct udevice *voltagedom_dev;
+};
+
 /**
  * struct scmi_transport_ops - The functions that a SCMI transport layer must implement.
  */
diff --git a/include/scmi_agent.h b/include/scmi_agent.h
index 577892029ff8..755986d6c424 100644
--- a/include/scmi_agent.h
+++ b/include/scmi_agent.h
@@ -10,6 +10,7 @@ 
 #ifndef SCMI_AGENT_H
 #define SCMI_AGENT_H
 
+#include <scmi_protocols.h>
 #include <asm/types.h>
 
 struct udevice;
@@ -74,6 +75,19 @@  int devm_scmi_of_get_channel(struct udevice *dev);
  */
 int devm_scmi_process_msg(struct udevice *dev, struct scmi_msg *msg);
 
+/**
+ * scmi_get_protocol() - get protocol instance
+ *
+ * @dev:	SCMI agent device
+ * @id:		SCMI protocol ID
+ *
+ * Obtain the device instance for given protocol ID, @id.
+ *
+ * Return:	Pointer to the device if found, null otherwise
+ */
+struct udevice *scmi_get_protocol(struct udevice *dev,
+				  enum scmi_std_protocol id);
+
 /**
  * scmi_to_linux_errno() - Convert an SCMI error code into a Linux errno code
  *