| Message ID | 20231011184823.443959-18-peter.griffin@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v3,01/20] dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible | expand |
On 10/11/2023, Peter Griffin wrote: > Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6, > (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile > phones. It features: > * 4xA55 little cluster > * 2xA76 Mid cluster > * 2xX1 Big cluster > > This commit adds the basic device tree for gs101 (SoC). > Further platform support will be added over time. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Tested-by: Will McVicker <willmcvicker@google.com> Thanks, Will > --- > arch/arm64/Kconfig.platforms | 6 + > arch/arm64/boot/dts/Makefile | 1 + > arch/arm64/boot/dts/google/gs101-pinctrl.dtsi | 1275 +++++++++++++++++ > arch/arm64/boot/dts/google/gs101-pinctrl.h | 32 + > arch/arm64/boot/dts/google/gs101.dtsi | 504 +++++++ > 5 files changed, 1818 insertions(+) > create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.h > create mode 100644 arch/arm64/boot/dts/google/gs101.dtsi > > diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms > index 6069120199bb..a5ed1b719488 100644 > --- a/arch/arm64/Kconfig.platforms > +++ b/arch/arm64/Kconfig.platforms > @@ -107,6 +107,12 @@ config ARCH_EXYNOS > help > This enables support for ARMv8 based Samsung Exynos SoC family. > > +config ARCH_GOOGLE_TENSOR > + bool "Google Tensor SoC fmaily" > + depends on ARCH_EXYNOS > + help > + Support for ARMv8 based Google Tensor platforms. > + > config ARCH_SPARX5 > bool "Microchip Sparx5 SoC family" > select PINCTRL > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile > index 30dd6347a929..a4ee7b628114 100644 > --- a/arch/arm64/boot/dts/Makefile > +++ b/arch/arm64/boot/dts/Makefile > @@ -13,6 +13,7 @@ subdir-y += broadcom > subdir-y += cavium > subdir-y += exynos > subdir-y += freescale > +subdir-y += google > subdir-y += hisilicon > subdir-y += intel > subdir-y += lg > diff --git a/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > new file mode 100644 > index 000000000000..ba88000c3ed8 > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > @@ -0,0 +1,1275 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * GS101 SoC pin-mux and pin-config device tree source > + * > + * Copyright 2019-2023 Google LLC > + * > + */ > + > +#include "gs101-pinctrl.h" > + > +/* GPIO_ALIVE */ > +&pinctrl_0 { > + gpa0: gpa0-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa1: gpa1-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa2: gpa2-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa3: gpa3-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa4: gpa4-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa5: gpa5-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa9: gpa9-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa10: gpa10-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + uart15_bus: uart15-bus-pins { > + samsung,pins = "gpa2-3", "gpa2-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + uart16_bus: uart16-bus-pins { > + samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + }; > + > + uart16_bus_rts: uart1-bus-rts-pins { > + samsung,pins = "gpa3-2"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-val = <1>; > + }; > + > + uart16_bus_tx_dat: uart1-bus-tx-dat-pins { > + samsung,pins = "gpa3-1"; > + samsung,pin-val = <1>; > + }; > + > + uart16_bus_tx_con: uart1-bus-tx-con-pins { > + samsung,pins = "gpa3-1"; > + samsung,pin-function = <1>; > + }; > + > + uart17_bus: uart17-bus-pins { > + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + spi15_bus: spi15-bus-pins { > + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi15_cs: spi15-cs-pins { > + samsung,pins = "gpa4-3"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > +}; > + > +/* GPIO_FAR_ALIVE */ > +&pinctrl_1 { > + gpa6: gpa6-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa7: gpa7-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa8: gpa8-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa11: gpa11-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; > + }; > +}; > + > +/* GPIO_GSACORE */ > +&pinctrl_2 { > + gps0: gps0-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gps1: gps1-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gps2: gps2-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +/* GPIO_GSACTRL */ > +&pinctrl_3 { > + gps3: gps3-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +/* GPIO_HSI1 */ > +&pinctrl_6 { > + gph0: gph0-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gph1: gph1-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + pcie0_clkreq: pcie0-clkreq-pins{ > + samsung,pins = "gph0-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + samsung,pin-con-pdn = <3>; > + samsung,pin-pud-pdn = <3>; > + }; > + > + pcie0_perst: pcie0-perst-pins { > + samsung,pins = "gph0-0"; > + samsung,pin-function = <1>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + samsung,pin-con-pdn = <3>; > + }; > +}; > + > +/* GPIO_HSI2 */ > +&pinctrl_7 { > + gph2: gph2-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gph3: gph3-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gph4: gph4-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + sd2_clk: sd2-clk-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_cmd: sd2-cmd-pins { > + samsung,pins = "gph4-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_bus1: sd2-bus-width1-pins { > + samsung,pins = "gph4-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_bus4: sd2-bus-width4-pins { > + samsung,pins = "gph4-3", "gph4-4", "gph4-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + }; > + > + ufs_rst_n: ufs-rst-n-pins { > + samsung,pins = "gph3-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-con-pdn = <3>; > + samsung,pin-pud-pdn = <0>; > + }; > + > + ufs_refclk_out: ufs-refclk-out-pins { > + samsung,pins = "gph3-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-con-pdn = <3>; > + samsung,pin-pud-pdn = <0>; > + }; > + > + pcie1_clkreq: pcie1-clkreq-pins { > + samsung,pins = "gph2-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + samsung,pin-con-pdn = <3>; > + samsung,pin-pud-pdn = <3>; > + }; > + > + pcie1_perst: pcie1-perst-pins { > + samsung,pins = "gph2-0"; > + samsung,pin-function = <1>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + samsung,pin-con-pdn = <3>; > + }; > +}; > + > +/* GPIO_PERIC0 */ > +&pinctrl_4 { > + gpp0: gpp0-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp1: gpp1-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp2: gpp2-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp3: gpp3-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp4: gpp4-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp5: gpp5-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp6: gpp6-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp7: gpp7-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp8: gpp8-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp9: gpp9-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp10: gpp10-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp11: gpp11-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp12: gpp12-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp13: gpp13-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp14: gpp14-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp15: gpp15-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp16: gpp16-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp17: gpp17-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp18: gpp18-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp19: gpp19-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + /* USI_PERIC0_UART_DBG */ > + uart0_bus: uart0-bus-pins { > + samsung,pins = "gpp1-2", "gpp1-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + disp_te_pri_on: disp-te-pri-on-pins { > + samsung,pins = "gpp0-3"; > + samsung,pin-function = <0xf>; > + }; > + > + disp_te_pri_off: disp-te-pri-off-pins { > + samsung,pins = "gpp0-3"; > + samsung,pin-function = <0>; > + }; > + > + disp_te_sec_on: disp-te-sec-on-pins { > + samsung,pins = "gpp0-4"; > + samsung,pin-function = <0xf>; > + }; > + > + disp_te_sec_off: disp-te-sec-off-pins { > + samsung,pins = "gpp0-4"; > + samsung,pin-function = <0>; > + }; > + > + sensor_mclk1_out: sensor-mclk1-out-pins { > + samsung,pins = "gpp3-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk1_fn: sensor-mclk1-fn-pins { > + samsung,pins = "gpp3-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk2_out: sensor-mclk2-out-pins { > + samsung,pins = "gpp5-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk2_fn: sensor-mclk2-fn-pins { > + samsung,pins = "gpp5-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk3_out: sensor-mclk3-out-pins { > + samsung,pins = "gpp7-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk3_fn: sensor-mclk3-fn-pins { > + samsung,pins = "gpp7-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk4_out: sensor-mclk4-out-pins { > + samsung,pins = "gpp9-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk4_fn: sensor-mclk4-fn-pins { > + samsung,pins = "gpp9-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk5_out: sensor-mclk5-out-pins { > + samsung,pins = "gpp11-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk5_fn: sensor-mclk5-fn-pins { > + samsung,pins = "gpp11-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk6_out: sensor-mclk6-out-pins { > + samsung,pins = "gpp13-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk6_fn: sensor-mclk6-fn-pins { > + samsung,pins = "gpp13-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk7_out: sensor-mclk7-out-pins { > + samsung,pins = "gpp15-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk7_fn: sensor-mclk7-fn-pins { > + samsung,pins = "gpp15-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk8_out: sensor-mclk8-out-pins { > + samsung,pins = "gpp17-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk8_fn: sensor-mclk8-fn-pins { > + samsung,pins = "gpp17-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + hsi2c14_bus: hsi2c14-bus-pins { > + samsung,pins = "gpp18-0", "gpp18-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart14_bus_single: uart14-bus-pins { > + samsung,pins = "gpp18-0", "gpp18-1", > + "gpp18-2", "gpp18-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + spi14_bus: spi14-bus-pins { > + samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi14_cs: spi14-cs-pins { > + samsung,pins = "gpp18-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi14_cs_func: spi14-cs-func-pins { > + samsung,pins = "gpp18-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c8_bus: hsi2c8-bus-pins { > + samsung,pins = "gpp16-0", "gpp16-1"; > + samsung,pin-function = <GS101_PIN_FUNC_3>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>; > + }; > + > + uart8_bus_single: uart8-bus-pins { > + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2", > + "gpp16-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi8_bus: spi8-bus-pins { > + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi8_cs: spi8-cs-pins { > + samsung,pins = "gpp16-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi8_cs_func: spi8-cs-func-pins { > + samsung,pins = "gpp16-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c7_bus: hsi2c7-bus-pins { > + samsung,pins = "gpp14-0", "gpp14-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart7_bus_single: uart7-bus-pins { > + samsung,pins = "gpp14-0", "gpp14-1", > + "gpp14-2", "gpp14-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi7_bus: spi7-bus-pins { > + samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi7_cs: spi7-cs-pins { > + samsung,pins = "gpp14-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi7_cs_func: spi7-cs-func-pins { > + samsung,pins = "gpp14-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c6_bus: hsi2c6-bus-pins { > + samsung,pins = "gpp12-0", "gpp12-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart6_bus_single: uart6-bus-pins { > + samsung,pins = "gpp12-0", "gpp12-1", > + "gpp12-2", "gpp12-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi6_bus: spi6-bus-pins { > + samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi6_cs: spi6-cs-pins { > + samsung,pins = "gpp12-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi6_cs_func: spi6-cs-func-pins { > + samsung,pins = "gpp12-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c5_bus: hsi2c5-bus-pins { > + samsung,pins = "gpp10-0", "gpp10-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart5_bus_single: uart5-bus-pins { > + samsung,pins = "gpp10-0", "gpp10-1", > + "gpp10-2", "gpp10-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi5_bus: spi5-bus-pins { > + samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2"; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + samsung,pin-function = <GS101_PIN_FUNC_3>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; > + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; > + }; > + > + spi5_cs_func: spi5-cs-func-pins { > + samsung,pins = "gpp10-3"; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + samsung,pin-function = <GS101_PIN_FUNC_3>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; > + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; > + }; > + > + hsi2c4_bus: hsi2c4-bus-pins { > + samsung,pins = "gpp8-0", "gpp8-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart4_bus_single: uart4-bus-pins { > + samsung,pins = "gpp8-0", "gpp8-1", > + "gpp8-2", "gpp8-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi4_bus: spi4-bus-pins { > + samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi4_cs: spi4-cs-pins { > + samsung,pins = "gpp8-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi4_cs_func: spi4-cs-func-pins { > + samsung,pins = "gpp8-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c3_bus: hsi2c3-bus-pins { > + samsung,pins = "gpp6-0", "gpp6-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart3_bus_single: uart3-bus-pins { > + samsung,pins = "gpp6-0", "gpp6-1", > + "gpp6-2", "gpp6-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi3_bus: spi3-bus-pins { > + samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi3_cs: spi3-cs-pins { > + samsung,pins = "gpp6-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi3_cs_func: spi3-cs-func-pins { > + samsung,pins = "gpp6-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c2_bus: hsi2c2-bus-pins { > + samsung,pins = "gpp4-0", "gpp4-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart2_bus_single: uart2-bus-pins { > + samsung,pins = "gpp4-0", "gpp4-1", > + "gpp4-2", "gpp4-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi2_bus: spi2-bus-pins { > + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi2_cs: spi2-cs-pins { > + samsung,pins = "gpp4-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi2_cs_func: spi2-cs-func-pins { > + samsung,pins = "gpp4-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c1_bus: hsi2c1-bus-pins { > + samsung,pins = "gpp2-0", "gpp2-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart1_bus_single: uart1-bus-pins { > + samsung,pins = "gpp2-0", "gpp2-1", > + "gpp2-2", "gpp2-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi1_bus: spi1-bus-pins { > + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi1_cs: spi1-cs-pins { > + samsung,pins = "gpp2-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi1_cs_func: spi1-cs-func-pins { > + samsung,pins = "gpp2-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > +}; > + > +/* GPIO_PERIC1 */ > +&pinctrl_5 { > + gpp20: gpp20-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp21: gpp21-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp22: gpp22-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp23: gpp23-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp24: gpp24-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp25: gpp25-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp26: gpp26-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp27: gpp27-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + hsi2c13_bus: hsi2c13-bus-pins { > + samsung,pins = "gpp25-0", "gpp25-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart13_bus_single: uart13-bus-pins { > + samsung,pins = "gpp25-0", "gpp25-1", > + "gpp25-2", "gpp25-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + spi13_bus: spi13-bus-pins { > + samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi13_cs: spi13-cs-pins { > + samsung,pins = "gpp25-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi13_cs_func: spi13-cs-func-pins { > + samsung,pins = "gpp25-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c12_bus: hsi2c12-bus-pins { > + samsung,pins = "gpp23-4", "gpp23-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart12_bus_single: uart12-bus-pins { > + samsung,pins = "gpp23-4", "gpp23-5", > + "gpp23-6", "gpp23-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + spi12_bus: spi12-bus-pins { > + samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi14_cs2: spi14-cs2-pins { > + samsung,pins = "gpp23-6"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi12_cs: spi12-cs-pins { > + samsung,pins = "gpp23-7"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi12_cs_func: spi12-cs-func-pins { > + samsung,pins = "gpp23-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c11_bus: hsi2c11-bus-pins { > + samsung,pins = "gpp23-0", "gpp23-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart11_bus_single: uart11-bus-pins { > + samsung,pins = "gpp23-0", "gpp23-1", > + "gpp23-2", "gpp23-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + spi11_bus: spi11-bus-pins { > + samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi11_cs: spi11-cs-pins { > + samsung,pins = "gpp23-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi11_cs_func: spi11-cs-func-pins { > + samsung,pins = "gpp23-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c10_bus: hsi2c10-bus-pins { > + samsung,pins = "gpp21-0", "gpp21-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart10_bus_single: uart10-bus-pins { > + samsung,pins = "gpp21-0", "gpp21-1", > + "gpp21-2", "gpp21-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + spi10_bus: spi10-bus-pins { > + samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi10_cs: spi10-cs-pins { > + samsung,pins = "gpp21-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi10_cs_func: spi10-cs-func-pins { > + samsung,pins = "gpp21-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c9_bus: hsi2c9-bus-pins { > + samsung,pins = "gpp20-4", "gpp20-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart9_bus_single: uart9-bus-pins { > + samsung,pins = "gpp20-4", "gpp20-5", > + "gpp20-6", "gpp20-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + spi9_bus: spi9-bus-pins { > + samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi9_cs: spi9-cs-pins { > + samsung,pins = "gpp20-7"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi9_cs_func: spi9-cs-func-pins { > + samsung,pins = "gpp20-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c0_bus: hsi2c0-bus-pins { > + samsung,pins = "gpp20-0", "gpp20-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart0_bus_single: uart0-bus-pins { > + samsung,pins = "gpp20-0", "gpp20-1", > + "gpp20-2", "gpp20-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi0_bus: spi0-bus-pins { > + samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi0_cs: spi0-cs-pins { > + samsung,pins = "gpp20-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi0_cs_func: spi0-cs-func-pins { > + samsung,pins = "gpp20-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > +}; > + > diff --git a/arch/arm64/boot/dts/google/gs101-pinctrl.h b/arch/arm64/boot/dts/google/gs101-pinctrl.h > new file mode 100644 > index 000000000000..16c54888f4bb > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101-pinctrl.h > @@ -0,0 +1,32 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Pinctrl binding constants for GS101 > + * > + * Copyright (c) 2020-2023 Google, LLC. > + */ > + > +#ifndef __DT_BINDINGS_PINCTRL_GS101_H__ > +#define __DT_BINDINGS_PINCTRL_GS101_H__ > + > +#define GS101_PIN_PULL_NONE 0 > +#define GS101_PIN_PULL_DOWN 1 > +#define GS101_PIN_PULL_UP 3 > + > +/* Pin function in power down mode */ > +#define GS101_PIN_PDN_OUT0 0 > +#define GS101_PIN_PDN_OUT1 1 > +#define GS101_PIN_PDN_INPUT 2 > +#define GS101_PIN_PDN_PREV 3 > + > +/* GS101 drive strengths */ > +#define GS101_PIN_DRV_2_5_MA 0 > +#define GS101_PIN_DRV_5_MA 1 > +#define GS101_PIN_DRV_7_5_MA 2 > +#define GS101_PIN_DRV_10_MA 3 > + > +#define GS101_PIN_FUNC_INPUT 0 > +#define GS101_PIN_FUNC_OUTPUT 1 > +#define GS101_PIN_FUNC_2 2 > +#define GS101_PIN_FUNC_3 3 > + > +#endif /* __DT_BINDINGS_PINCTRL_GS101_H__ */ > diff --git a/arch/arm64/boot/dts/google/gs101.dtsi b/arch/arm64/boot/dts/google/gs101.dtsi > new file mode 100644 > index 000000000000..37fb0a4dc8d3 > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101.dtsi > @@ -0,0 +1,504 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * GS101 SoC > + * > + * Copyright 2019-2023 Google LLC > + * > + */ > + > +#include <dt-bindings/clock/google,gs101.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +/ { > + compatible = "google,gs101"; > + #address-cells = <2>; > + #size-cells = <1>; > + > + interrupt-parent = <&gic>; > + > + aliases { > + pinctrl0 = &pinctrl_0; > + pinctrl1 = &pinctrl_1; > + pinctrl2 = &pinctrl_2; > + pinctrl3 = &pinctrl_3; > + pinctrl4 = &pinctrl_4; > + pinctrl5 = &pinctrl_5; > + pinctrl6 = &pinctrl_6; > + pinctrl7 = &pinctrl_7; > + serial0 = &serial_0; > + }; > + > + arm-pmu { > + compatible = "arm,armv8-pmuv3"; > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; > + }; > + > + dsu-pmu-0 { > + compatible = "arm,dsu-pmu"; > + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>; > + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, > + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; > + }; > + > + /* TODO replace with CCF clock */ > + dummy_clk: oscillator { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <12345>; > + clock-output-names = "pclk"; > + }; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + cpu-map { > + cluster0 { > + core0 { > + cpu = <&cpu0>; > + }; > + core1 { > + cpu = <&cpu1>; > + }; > + core2 { > + cpu = <&cpu2>; > + }; > + core3 { > + cpu = <&cpu3>; > + }; > + }; > + > + cluster1 { > + core0 { > + cpu = <&cpu4>; > + }; > + core1 { > + cpu = <&cpu5>; > + }; > + }; > + > + cluster2 { > + core0 { > + cpu = <&cpu6>; > + }; > + core1 { > + cpu = <&cpu7>; > + }; > + }; > + }; > + > + cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0000>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + > + cpu1: cpu@100 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0100>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + > + cpu2: cpu@200 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0200>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + > + cpu3: cpu@300 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0300>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + > + cpu4: cpu@400 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0400>; > + enable-method = "psci"; > + cpu-idle-states = <&ENYO_CPU_SLEEP>; > + capacity-dmips-mhz = <620>; > + dynamic-power-coefficient = <284>; > + }; > + > + cpu5: cpu@500 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0500>; > + enable-method = "psci"; > + cpu-idle-states = <&ENYO_CPU_SLEEP>; > + capacity-dmips-mhz = <620>; > + dynamic-power-coefficient = <284>; > + }; > + > + cpu6: cpu@600 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0600>; > + enable-method = "psci"; > + cpu-idle-states = <&HERA_CPU_SLEEP>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <650>; > + }; > + > + cpu7: cpu@700 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0700>; > + enable-method = "psci"; > + cpu-idle-states = <&HERA_CPU_SLEEP>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <650>; > + }; > + > + idle-states { > + entry-method = "psci"; > + > + ANANKE_CPU_SLEEP: cpu-ananke-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <70>; > + exit-latency-us = <160>; > + min-residency-us = <2000>; > + }; > + > + ENYO_CPU_SLEEP: cpu-enyo-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <150>; > + exit-latency-us = <190>; > + min-residency-us = <2500>; > + }; > + > + HERA_CPU_SLEEP: cpu-hera-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <235>; > + exit-latency-us = <220>; > + min-residency-us = <3500>; > + }; > + }; > + }; > + > + /* bootloader requires ect node */ > + ect { > + parameter_address = <0x90000000>; > + parameter_size = <0x53000>; > + }; > + > + ext_24_5m: clock-1 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24576000>; > + clock-output-names = "oscclk"; > + }; > + > + ext_200m: clock-2 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <200000000>; > + clock-output-names = "ext-200m"; > + }; > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + reserved_memory: reserved-memory { > + #address-cells = <2>; > + #size-cells = <1>; > + ranges; > + > + gsa_reserved_protected: gsa@90200000 { > + reg = <0x0 0x90200000 0x400000>; > + no-map; > + }; > + > + tpu_fw_reserved: tpu-fw@93000000 { > + reg = <0x0 0x93000000 0x1000000>; > + no-map; > + }; > + > + aoc_reserve: aoc@94000000 { > + reg = <0x0 0x94000000 0x03000000>; > + no-map; > + }; > + > + abl_reserved: abl@f8800000 { > + reg = <0x0 0xf8800000 0x02000000>; > + no-map; > + }; > + > + dss_log_reserved: dss-log-reserved@fd3f0000 { > + reg = <0 0xfd3f0000 0x0000e000>; > + no-map; > + }; > + > + debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 { > + reg = <0 0xfd3fe000 0x00001000>; > + no-map; > + }; > + > + bldr_log_reserved: bldr-log-reserved@fd800000 { > + reg = <0 0xfd800000 0x00100000>; > + no-map; > + }; > + > + bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 { > + reg = <0 0xfd900000 0x00002000>; > + no-map; > + }; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; > + clock-frequency = <24576000>; > + }; > + > + soc: soc@0 { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <1>; > + ranges; > + > + cmu_misc: clock-controller@10010000 { > + compatible = "google,gs101-cmu-misc"; > + reg = <0x0 0x10010000 0x8000>; > + #clock-cells = <1>; > + clocks = <&ext_24_5m>, <&cmu_top CLK_DOUT_MISC_BUS>; > + clock-names = "oscclk", "dout_cmu_misc_bus"; > + }; > + > + watchdog_cl0: watchdog@10060000 { > + compatible = "google,gs101-wdt"; > + reg = <0x0 0x10060000 0x100>; > + interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0>, <&ext_24_5m>; > + clock-names = "watchdog", "watchdog_src"; > + samsung,syscon-phandle = <&pmu_system_controller>; > + samsung,cluster-index = <0>; > + }; > + > + watchdog_cl1: watchdog@10070000 { > + compatible = "google,gs101-wdt"; > + reg = <0x0 0x10070000 0x100>; > + interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1>, <&ext_24_5m>; > + clock-names = "watchdog", "watchdog_src"; > + samsung,syscon-phandle = <&pmu_system_controller>; > + samsung,cluster-index = <1>; > + status = "disabled"; > + }; > + > + gic: interrupt-controller@10400000 { > + compatible = "arm,gic-v3"; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x0 0x10400000 0x10000>, /* GICD */ > + <0x0 0x10440000 0x100000>; /* GICR * 8 */ > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + sysreg_peric0: syscon@10821000 { > + compatible = "google,gs101-peric0-sysreg", "syscon"; > + reg = <0x0 0x10821000 0x40000>; > + }; > + > + /* GPIO_PERIC0 */ > + pinctrl_4: pinctrl@10840000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x10840000 0x00001000>; > + interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + serial_0: serial@10a00000 { > + compatible = "google,gs101-uart"; > + reg = <0x0 0x10a00000 0xc0>; > + reg-io-width = <4>; > + samsung,uart-fifosize = <256>; > + interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&dummy_clk 0>, <&dummy_clk 0>; > + clock-names = "uart", "clk_uart_baud0"; > + }; > + > + /* GPIO_PERIC1 */ > + pinctrl_5: pinctrl@10c40000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x10C40000 0x00001000>; > + interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + sysreg_peric1: syscon@10c21000 { > + compatible = "google,gs101-peric1-sysreg", "syscon"; > + reg = <0x0 0x10C21000 0x40000>; > + }; > + > + /* GPIO_HSI1 */ > + pinctrl_6: pinctrl@11840000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x11840000 0x00001000>; > + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + /* GPIO_HSI2 */ > + pinctrl_7: pinctrl@14440000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x14440000 0x00001000>; > + interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + cmu_apm: clock-controller@17400000 { > + compatible = "google,gs101-cmu-apm"; > + reg = <0x0 0x17400000 0x8000>; > + #clock-cells = <1>; > + > + clocks = <&ext_24_5m>; > + clock-names = "oscclk"; > + }; > + > + sysreg_apm: syscon@174204e0 { > + compatible = "google,gs101-apm-sysreg", "syscon"; > + reg = <0x0 0x174204e0 0x1000>; > + }; > + > + pmu_system_controller: system-controller@17460000 { > + compatible = "google,gs101-pmu", "syscon"; > + reg = <0x0 0x17460000 0x10000>; > + }; > + > + /* GPIO_ALIVE */ > + pinctrl_0: pinctrl@174d0000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x174d0000 0x00001000>; > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > + > + wakeup-interrupt-controller { > + compatible = "google,gs101-wakeup-eint"; > + }; > + }; > + > + /* GPIO_FAR_ALIVE */ > + pinctrl_1: pinctrl@174e0000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x174e0000 0x00001000>; > + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; > + > + wakeup-interrupt-controller { > + compatible = "google,gs101-wakeup-eint"; > + }; > + }; > + > + /* GPIO_GSACTRL */ > + pinctrl_3: pinctrl@17940000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x17940000 0x00001000>; > + }; > + > + /* GPIO_GSACORE */ > + pinctrl_2: pinctrl@17a80000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x17a80000 0x00001000>; > + }; > + > + cmu_top: clock-controller@1e080000 { > + compatible = "google,gs101-cmu-top"; > + reg = <0x0 0x1e080000 0x8000>; > + #clock-cells = <1>; > + > + clocks = <&ext_24_5m>; > + clock-names = "oscclk"; > + }; > + }; > +}; > + > +#include "gs101-pinctrl.dtsi" > -- > 2.42.0.655.g421f12c284-goog >
On 11/10/2023 20:48, Peter Griffin wrote: ... > diff --git a/arch/arm64/boot/dts/google/gs101.dtsi b/arch/arm64/boot/dts/google/gs101.dtsi > new file mode 100644 > index 000000000000..37fb0a4dc8d3 > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101.dtsi > @@ -0,0 +1,504 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * GS101 SoC > + * > + * Copyright 2019-2023 Google LLC > + * > + */ > + > +#include <dt-bindings/clock/google,gs101.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +/ { > + compatible = "google,gs101"; > + #address-cells = <2>; > + #size-cells = <1>; > + > + interrupt-parent = <&gic>; > + > + aliases { > + pinctrl0 = &pinctrl_0; > + pinctrl1 = &pinctrl_1; > + pinctrl2 = &pinctrl_2; > + pinctrl3 = &pinctrl_3; > + pinctrl4 = &pinctrl_4; > + pinctrl5 = &pinctrl_5; > + pinctrl6 = &pinctrl_6; > + pinctrl7 = &pinctrl_7; > + serial0 = &serial_0; > + }; > + > + arm-pmu { pmu-0 > + compatible = "arm,armv8-pmuv3"; > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; > + }; > + > + dsu-pmu-0 { pmu-1 > + compatible = "arm,dsu-pmu"; > + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>; > + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, > + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; > + }; > + > + /* TODO replace with CCF clock */ > + dummy_clk: oscillator { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <12345>; > + clock-output-names = "pclk"; > + }; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + cpu-map { > + cluster0 { > + core0 { > + cpu = <&cpu0>; > + }; > + core1 { > + cpu = <&cpu1>; > + }; > + core2 { > + cpu = <&cpu2>; > + }; > + core3 { > + cpu = <&cpu3>; > + }; > + }; > + > + cluster1 { > + core0 { > + cpu = <&cpu4>; > + }; > + core1 { > + cpu = <&cpu5>; > + }; > + }; > + > + cluster2 { > + core0 { > + cpu = <&cpu6>; > + }; > + core1 { > + cpu = <&cpu7>; > + }; > + }; > + }; > + > + cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0000>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + > + cpu1: cpu@100 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0100>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + > + cpu2: cpu@200 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0200>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + > + cpu3: cpu@300 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0300>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + > + cpu4: cpu@400 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0400>; > + enable-method = "psci"; > + cpu-idle-states = <&ENYO_CPU_SLEEP>; > + capacity-dmips-mhz = <620>; > + dynamic-power-coefficient = <284>; > + }; > + > + cpu5: cpu@500 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0500>; > + enable-method = "psci"; > + cpu-idle-states = <&ENYO_CPU_SLEEP>; > + capacity-dmips-mhz = <620>; > + dynamic-power-coefficient = <284>; > + }; > + > + cpu6: cpu@600 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0600>; > + enable-method = "psci"; > + cpu-idle-states = <&HERA_CPU_SLEEP>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <650>; > + }; > + > + cpu7: cpu@700 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0700>; > + enable-method = "psci"; > + cpu-idle-states = <&HERA_CPU_SLEEP>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <650>; > + }; > + > + idle-states { > + entry-method = "psci"; > + > + ANANKE_CPU_SLEEP: cpu-ananke-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <70>; > + exit-latency-us = <160>; > + min-residency-us = <2000>; > + }; > + > + ENYO_CPU_SLEEP: cpu-enyo-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <150>; > + exit-latency-us = <190>; > + min-residency-us = <2500>; > + }; > + > + HERA_CPU_SLEEP: cpu-hera-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <235>; > + exit-latency-us = <220>; > + min-residency-us = <3500>; > + }; > + }; > + }; > + > + /* bootloader requires ect node */ > + ect { This needs bindings. > + parameter_address = <0x90000000>; No underscores in property names. Use hyphen. > + parameter_size = <0x53000>; No underscores. > + }; > + > + ext_24_5m: clock-1 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24576000>; > + clock-output-names = "oscclk"; > + }; Best regards, Krzysztof
On 11/10/2023 20:48, Peter Griffin wrote: > Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6, > (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile > phones. It features: > * 4xA55 little cluster > * 2xA76 Mid cluster > * 2xX1 Big cluster > ... > + gpa10: gpa10-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + uart15_bus: uart15-bus-pins { > + samsung,pins = "gpa2-3", "gpa2-4"; > + samsung,pin-function = <2>; GS101_PIN_FUNC_2 > + samsung,pin-pud = <0>; GS101_PIN_PULL_NONE > + }; > + > + uart16_bus: uart16-bus-pins { > + samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; But here it is correct... > + }; > + > + uart16_bus_rts: uart1-bus-rts-pins { > + samsung,pins = "gpa3-2"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-val = <1>; Why do you set UART RTS pin value? > + }; > + > + uart16_bus_tx_dat: uart1-bus-tx-dat-pins { > + samsung,pins = "gpa3-1"; > + samsung,pin-val = <1>; > + }; > + Best regards, Krzysztof
On Wed, Oct 11, 2023 at 1:49 PM Peter Griffin <peter.griffin@linaro.org> wrote: > > Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6, > (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile > phones. It features: > * 4xA55 little cluster > * 2xA76 Mid cluster > * 2xX1 Big cluster > > This commit adds the basic device tree for gs101 (SoC). > Further platform support will be added over time. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > --- > arch/arm64/Kconfig.platforms | 6 + > arch/arm64/boot/dts/Makefile | 1 + > arch/arm64/boot/dts/google/gs101-pinctrl.dtsi | 1275 +++++++++++++++++ > arch/arm64/boot/dts/google/gs101-pinctrl.h | 32 + > arch/arm64/boot/dts/google/gs101.dtsi | 504 +++++++ > 5 files changed, 1818 insertions(+) > create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.h > create mode 100644 arch/arm64/boot/dts/google/gs101.dtsi > > diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms > index 6069120199bb..a5ed1b719488 100644 > --- a/arch/arm64/Kconfig.platforms > +++ b/arch/arm64/Kconfig.platforms > @@ -107,6 +107,12 @@ config ARCH_EXYNOS > help > This enables support for ARMv8 based Samsung Exynos SoC family. > > +config ARCH_GOOGLE_TENSOR > + bool "Google Tensor SoC fmaily" > + depends on ARCH_EXYNOS > + help > + Support for ARMv8 based Google Tensor platforms. > + > config ARCH_SPARX5 > bool "Microchip Sparx5 SoC family" > select PINCTRL > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile > index 30dd6347a929..a4ee7b628114 100644 > --- a/arch/arm64/boot/dts/Makefile > +++ b/arch/arm64/boot/dts/Makefile > @@ -13,6 +13,7 @@ subdir-y += broadcom > subdir-y += cavium > subdir-y += exynos > subdir-y += freescale > +subdir-y += google > subdir-y += hisilicon > subdir-y += intel > subdir-y += lg > diff --git a/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > new file mode 100644 > index 000000000000..ba88000c3ed8 > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > @@ -0,0 +1,1275 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * GS101 SoC pin-mux and pin-config device tree source > + * > + * Copyright 2019-2023 Google LLC > + * This line is not needed. Also, maybe also add Linaro copyright here? > + */ > + > +#include "gs101-pinctrl.h" > + > +/* GPIO_ALIVE */ > +&pinctrl_0 { Why not just rename it to pinctrl_alive and remove the comment? The same goes for all pinctrl nodes below. > + gpa0: gpa0-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, Here and further: please align it to be at the same indentation level as above line. > + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa1: gpa1-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa2: gpa2-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa3: gpa3-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa4: gpa4-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa5: gpa5-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa9: gpa9-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa10: gpa10-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + uart15_bus: uart15-bus-pins { > + samsung,pins = "gpa2-3", "gpa2-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; Could above two lines be replaced with some meaningful consts? I see it's done below. > + }; > + > + uart16_bus: uart16-bus-pins { > + samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + }; > + > + uart16_bus_rts: uart1-bus-rts-pins { > + samsung,pins = "gpa3-2"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-val = <1>; > + }; > + > + uart16_bus_tx_dat: uart1-bus-tx-dat-pins { > + samsung,pins = "gpa3-1"; > + samsung,pin-val = <1>; > + }; > + > + uart16_bus_tx_con: uart1-bus-tx-con-pins { > + samsung,pins = "gpa3-1"; > + samsung,pin-function = <1>; Named const? > + }; > + > + uart17_bus: uart17-bus-pins { > + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; Here and further: if possible, try to use named constants. > + }; > + > + spi15_bus: spi15-bus-pins { > + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi15_cs: spi15-cs-pins { > + samsung,pins = "gpa4-3"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > +}; > + > +/* GPIO_FAR_ALIVE */ > +&pinctrl_1 { > + gpa6: gpa6-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa7: gpa7-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa8: gpa8-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + gpa11: gpa11-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; > + }; > +}; > + > +/* GPIO_GSACORE */ > +&pinctrl_2 { > + gps0: gps0-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gps1: gps1-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gps2: gps2-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +/* GPIO_GSACTRL */ > +&pinctrl_3 { > + gps3: gps3-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > + > +/* GPIO_HSI1 */ > +&pinctrl_6 { > + gph0: gph0-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gph1: gph1-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + pcie0_clkreq: pcie0-clkreq-pins{ > + samsung,pins = "gph0-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + samsung,pin-con-pdn = <3>; > + samsung,pin-pud-pdn = <3>; What are those two properties? I don't see them documented in dt-bindings or being mentioned in the driver. > + }; > + > + pcie0_perst: pcie0-perst-pins { > + samsung,pins = "gph0-0"; > + samsung,pin-function = <1>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + samsung,pin-con-pdn = <3>; > + }; > +}; > + > +/* GPIO_HSI2 */ > +&pinctrl_7 { > + gph2: gph2-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gph3: gph3-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gph4: gph4-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + sd2_clk: sd2-clk-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_cmd: sd2-cmd-pins { > + samsung,pins = "gph4-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_bus1: sd2-bus-width1-pins { > + samsung,pins = "gph4-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_bus4: sd2-bus-width4-pins { > + samsung,pins = "gph4-3", "gph4-4", "gph4-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > + }; > + > + sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins { > + samsung,pins = "gph4-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + }; > + > + ufs_rst_n: ufs-rst-n-pins { > + samsung,pins = "gph3-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-con-pdn = <3>; > + samsung,pin-pud-pdn = <0>; > + }; > + > + ufs_refclk_out: ufs-refclk-out-pins { > + samsung,pins = "gph3-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-con-pdn = <3>; > + samsung,pin-pud-pdn = <0>; > + }; > + > + pcie1_clkreq: pcie1-clkreq-pins { > + samsung,pins = "gph2-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + samsung,pin-con-pdn = <3>; > + samsung,pin-pud-pdn = <3>; > + }; > + > + pcie1_perst: pcie1-perst-pins { > + samsung,pins = "gph2-0"; > + samsung,pin-function = <1>; > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > + samsung,pin-con-pdn = <3>; > + }; > +}; > + > +/* GPIO_PERIC0 */ > +&pinctrl_4 { > + gpp0: gpp0-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp1: gpp1-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp2: gpp2-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp3: gpp3-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp4: gpp4-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp5: gpp5-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp6: gpp6-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp7: gpp7-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp8: gpp8-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp9: gpp9-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp10: gpp10-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp11: gpp11-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp12: gpp12-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp13: gpp13-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp14: gpp14-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp15: gpp15-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp16: gpp16-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp17: gpp17-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp18: gpp18-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp19: gpp19-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + /* USI_PERIC0_UART_DBG */ > + uart0_bus: uart0-bus-pins { > + samsung,pins = "gpp1-2", "gpp1-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + disp_te_pri_on: disp-te-pri-on-pins { > + samsung,pins = "gpp0-3"; > + samsung,pin-function = <0xf>; > + }; > + > + disp_te_pri_off: disp-te-pri-off-pins { > + samsung,pins = "gpp0-3"; > + samsung,pin-function = <0>; > + }; > + > + disp_te_sec_on: disp-te-sec-on-pins { > + samsung,pins = "gpp0-4"; > + samsung,pin-function = <0xf>; > + }; > + > + disp_te_sec_off: disp-te-sec-off-pins { > + samsung,pins = "gpp0-4"; > + samsung,pin-function = <0>; > + }; > + > + sensor_mclk1_out: sensor-mclk1-out-pins { > + samsung,pins = "gpp3-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk1_fn: sensor-mclk1-fn-pins { > + samsung,pins = "gpp3-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk2_out: sensor-mclk2-out-pins { > + samsung,pins = "gpp5-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk2_fn: sensor-mclk2-fn-pins { > + samsung,pins = "gpp5-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk3_out: sensor-mclk3-out-pins { > + samsung,pins = "gpp7-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk3_fn: sensor-mclk3-fn-pins { > + samsung,pins = "gpp7-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk4_out: sensor-mclk4-out-pins { > + samsung,pins = "gpp9-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk4_fn: sensor-mclk4-fn-pins { > + samsung,pins = "gpp9-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk5_out: sensor-mclk5-out-pins { > + samsung,pins = "gpp11-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk5_fn: sensor-mclk5-fn-pins { > + samsung,pins = "gpp11-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk6_out: sensor-mclk6-out-pins { > + samsung,pins = "gpp13-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk6_fn: sensor-mclk6-fn-pins { > + samsung,pins = "gpp13-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk7_out: sensor-mclk7-out-pins { > + samsung,pins = "gpp15-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk7_fn: sensor-mclk7-fn-pins { > + samsung,pins = "gpp15-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk8_out: sensor-mclk8-out-pins { > + samsung,pins = "gpp17-0"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + sensor_mclk8_fn: sensor-mclk8-fn-pins { > + samsung,pins = "gpp17-0"; > + samsung,pin-function = <GS101_PIN_FUNC_2>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > + }; > + > + hsi2c14_bus: hsi2c14-bus-pins { > + samsung,pins = "gpp18-0", "gpp18-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart14_bus_single: uart14-bus-pins { > + samsung,pins = "gpp18-0", "gpp18-1", > + "gpp18-2", "gpp18-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + spi14_bus: spi14-bus-pins { > + samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi14_cs: spi14-cs-pins { > + samsung,pins = "gpp18-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi14_cs_func: spi14-cs-func-pins { > + samsung,pins = "gpp18-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c8_bus: hsi2c8-bus-pins { > + samsung,pins = "gpp16-0", "gpp16-1"; > + samsung,pin-function = <GS101_PIN_FUNC_3>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>; > + }; > + > + uart8_bus_single: uart8-bus-pins { > + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2", > + "gpp16-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi8_bus: spi8-bus-pins { > + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi8_cs: spi8-cs-pins { > + samsung,pins = "gpp16-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi8_cs_func: spi8-cs-func-pins { > + samsung,pins = "gpp16-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c7_bus: hsi2c7-bus-pins { > + samsung,pins = "gpp14-0", "gpp14-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart7_bus_single: uart7-bus-pins { > + samsung,pins = "gpp14-0", "gpp14-1", > + "gpp14-2", "gpp14-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi7_bus: spi7-bus-pins { > + samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi7_cs: spi7-cs-pins { > + samsung,pins = "gpp14-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi7_cs_func: spi7-cs-func-pins { > + samsung,pins = "gpp14-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c6_bus: hsi2c6-bus-pins { > + samsung,pins = "gpp12-0", "gpp12-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart6_bus_single: uart6-bus-pins { > + samsung,pins = "gpp12-0", "gpp12-1", > + "gpp12-2", "gpp12-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi6_bus: spi6-bus-pins { > + samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi6_cs: spi6-cs-pins { > + samsung,pins = "gpp12-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi6_cs_func: spi6-cs-func-pins { > + samsung,pins = "gpp12-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c5_bus: hsi2c5-bus-pins { > + samsung,pins = "gpp10-0", "gpp10-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart5_bus_single: uart5-bus-pins { > + samsung,pins = "gpp10-0", "gpp10-1", > + "gpp10-2", "gpp10-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi5_bus: spi5-bus-pins { > + samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2"; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + samsung,pin-function = <GS101_PIN_FUNC_3>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; > + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; > + }; > + > + spi5_cs_func: spi5-cs-func-pins { > + samsung,pins = "gpp10-3"; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + samsung,pin-function = <GS101_PIN_FUNC_3>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; > + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; > + }; > + > + hsi2c4_bus: hsi2c4-bus-pins { > + samsung,pins = "gpp8-0", "gpp8-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart4_bus_single: uart4-bus-pins { > + samsung,pins = "gpp8-0", "gpp8-1", > + "gpp8-2", "gpp8-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi4_bus: spi4-bus-pins { > + samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi4_cs: spi4-cs-pins { > + samsung,pins = "gpp8-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi4_cs_func: spi4-cs-func-pins { > + samsung,pins = "gpp8-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c3_bus: hsi2c3-bus-pins { > + samsung,pins = "gpp6-0", "gpp6-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart3_bus_single: uart3-bus-pins { > + samsung,pins = "gpp6-0", "gpp6-1", > + "gpp6-2", "gpp6-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi3_bus: spi3-bus-pins { > + samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi3_cs: spi3-cs-pins { > + samsung,pins = "gpp6-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi3_cs_func: spi3-cs-func-pins { > + samsung,pins = "gpp6-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c2_bus: hsi2c2-bus-pins { > + samsung,pins = "gpp4-0", "gpp4-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart2_bus_single: uart2-bus-pins { > + samsung,pins = "gpp4-0", "gpp4-1", > + "gpp4-2", "gpp4-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi2_bus: spi2-bus-pins { > + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi2_cs: spi2-cs-pins { > + samsung,pins = "gpp4-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi2_cs_func: spi2-cs-func-pins { > + samsung,pins = "gpp4-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c1_bus: hsi2c1-bus-pins { > + samsung,pins = "gpp2-0", "gpp2-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart1_bus_single: uart1-bus-pins { > + samsung,pins = "gpp2-0", "gpp2-1", > + "gpp2-2", "gpp2-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi1_bus: spi1-bus-pins { > + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi1_cs: spi1-cs-pins { > + samsung,pins = "gpp2-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi1_cs_func: spi1-cs-func-pins { > + samsung,pins = "gpp2-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > +}; > + > +/* GPIO_PERIC1 */ > +&pinctrl_5 { > + gpp20: gpp20-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp21: gpp21-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp22: gpp22-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp23: gpp23-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp24: gpp24-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp25: gpp25-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp26: gpp26-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpp27: gpp27-gpio-bank { > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + hsi2c13_bus: hsi2c13-bus-pins { > + samsung,pins = "gpp25-0", "gpp25-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart13_bus_single: uart13-bus-pins { > + samsung,pins = "gpp25-0", "gpp25-1", > + "gpp25-2", "gpp25-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + spi13_bus: spi13-bus-pins { > + samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi13_cs: spi13-cs-pins { > + samsung,pins = "gpp25-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi13_cs_func: spi13-cs-func-pins { > + samsung,pins = "gpp25-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c12_bus: hsi2c12-bus-pins { > + samsung,pins = "gpp23-4", "gpp23-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart12_bus_single: uart12-bus-pins { > + samsung,pins = "gpp23-4", "gpp23-5", > + "gpp23-6", "gpp23-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + spi12_bus: spi12-bus-pins { > + samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi14_cs2: spi14-cs2-pins { > + samsung,pins = "gpp23-6"; > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi12_cs: spi12-cs-pins { > + samsung,pins = "gpp23-7"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi12_cs_func: spi12-cs-func-pins { > + samsung,pins = "gpp23-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c11_bus: hsi2c11-bus-pins { > + samsung,pins = "gpp23-0", "gpp23-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart11_bus_single: uart11-bus-pins { > + samsung,pins = "gpp23-0", "gpp23-1", > + "gpp23-2", "gpp23-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + spi11_bus: spi11-bus-pins { > + samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi11_cs: spi11-cs-pins { > + samsung,pins = "gpp23-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi11_cs_func: spi11-cs-func-pins { > + samsung,pins = "gpp23-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c10_bus: hsi2c10-bus-pins { > + samsung,pins = "gpp21-0", "gpp21-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart10_bus_single: uart10-bus-pins { > + samsung,pins = "gpp21-0", "gpp21-1", > + "gpp21-2", "gpp21-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + spi10_bus: spi10-bus-pins { > + samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi10_cs: spi10-cs-pins { > + samsung,pins = "gpp21-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi10_cs_func: spi10-cs-func-pins { > + samsung,pins = "gpp21-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c9_bus: hsi2c9-bus-pins { > + samsung,pins = "gpp20-4", "gpp20-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart9_bus_single: uart9-bus-pins { > + samsung,pins = "gpp20-4", "gpp20-5", > + "gpp20-6", "gpp20-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + }; > + > + spi9_bus: spi9-bus-pins { > + samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi9_cs: spi9-cs-pins { > + samsung,pins = "gpp20-7"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi9_cs_func: spi9-cs-func-pins { > + samsung,pins = "gpp20-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + hsi2c0_bus: hsi2c0-bus-pins { > + samsung,pins = "gpp20-0", "gpp20-1"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + uart0_bus_single: uart0-bus-pins { > + samsung,pins = "gpp20-0", "gpp20-1", > + "gpp20-2", "gpp20-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + }; > + > + spi0_bus: spi0-bus-pins { > + samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi0_cs: spi0-cs-pins { > + samsung,pins = "gpp20-3"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > + > + spi0_cs_func: spi0-cs-func-pins { > + samsung,pins = "gpp20-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > + }; > +}; > + > diff --git a/arch/arm64/boot/dts/google/gs101-pinctrl.h b/arch/arm64/boot/dts/google/gs101-pinctrl.h > new file mode 100644 > index 000000000000..16c54888f4bb > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101-pinctrl.h > @@ -0,0 +1,32 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Pinctrl binding constants for GS101 > + * > + * Copyright (c) 2020-2023 Google, LLC. > + */ > + > +#ifndef __DT_BINDINGS_PINCTRL_GS101_H__ > +#define __DT_BINDINGS_PINCTRL_GS101_H__ > + > +#define GS101_PIN_PULL_NONE 0 > +#define GS101_PIN_PULL_DOWN 1 > +#define GS101_PIN_PULL_UP 3 > + > +/* Pin function in power down mode */ > +#define GS101_PIN_PDN_OUT0 0 > +#define GS101_PIN_PDN_OUT1 1 > +#define GS101_PIN_PDN_INPUT 2 > +#define GS101_PIN_PDN_PREV 3 > + > +/* GS101 drive strengths */ > +#define GS101_PIN_DRV_2_5_MA 0 > +#define GS101_PIN_DRV_5_MA 1 > +#define GS101_PIN_DRV_7_5_MA 2 > +#define GS101_PIN_DRV_10_MA 3 > + > +#define GS101_PIN_FUNC_INPUT 0 > +#define GS101_PIN_FUNC_OUTPUT 1 > +#define GS101_PIN_FUNC_2 2 > +#define GS101_PIN_FUNC_3 3 > + Maybe it's possible to somehow re-use already existing values in arch/arm64/boot/dts/exynos/exynos-pinctrl.h? > +#endif /* __DT_BINDINGS_PINCTRL_GS101_H__ */ > diff --git a/arch/arm64/boot/dts/google/gs101.dtsi b/arch/arm64/boot/dts/google/gs101.dtsi > new file mode 100644 > index 000000000000..37fb0a4dc8d3 > --- /dev/null > +++ b/arch/arm64/boot/dts/google/gs101.dtsi > @@ -0,0 +1,504 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * GS101 SoC > + * > + * Copyright 2019-2023 Google LLC > + * This line is not needed. Also (but not sure): maybe add the author and Linaro copyright? > + */ > + > +#include <dt-bindings/clock/google,gs101.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +/ { > + compatible = "google,gs101"; > + #address-cells = <2>; > + #size-cells = <1>; > + > + interrupt-parent = <&gic>; > + > + aliases { > + pinctrl0 = &pinctrl_0; > + pinctrl1 = &pinctrl_1; > + pinctrl2 = &pinctrl_2; > + pinctrl3 = &pinctrl_3; > + pinctrl4 = &pinctrl_4; > + pinctrl5 = &pinctrl_5; > + pinctrl6 = &pinctrl_6; > + pinctrl7 = &pinctrl_7; > + serial0 = &serial_0; > + }; > + > + arm-pmu { > + compatible = "arm,armv8-pmuv3"; Is there any more specifi Cortex PMU compatible for this chip? > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; Please try to keep it to 80 characters per line. > + }; > + > + dsu-pmu-0 { > + compatible = "arm,dsu-pmu"; > + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>; > + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, > + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; > + }; > + > + /* TODO replace with CCF clock */ > + dummy_clk: oscillator { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <12345>; > + clock-output-names = "pclk"; > + }; > + > + cpus { > + #address-cells = <2>; Why 2-cells is needed here? If you make it 1, all below reg properties can be made 1-cell, which removes not needed 0x0. > + #size-cells = <0>; > + > + cpu-map { > + cluster0 { > + core0 { > + cpu = <&cpu0>; > + }; > + core1 { > + cpu = <&cpu1>; > + }; > + core2 { > + cpu = <&cpu2>; > + }; > + core3 { > + cpu = <&cpu3>; > + }; > + }; > + > + cluster1 { > + core0 { > + cpu = <&cpu4>; > + }; > + core1 { > + cpu = <&cpu5>; > + }; > + }; > + > + cluster2 { > + core0 { > + cpu = <&cpu6>; > + }; > + core1 { > + cpu = <&cpu7>; > + }; > + }; > + }; > + > + cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,armv8"; Is there maybe any more specific Cortex compatible? > + reg = <0x0 0x0000>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + > + cpu1: cpu@100 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0100>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + > + cpu2: cpu@200 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0200>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + > + cpu3: cpu@300 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0300>; > + enable-method = "psci"; > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > + capacity-dmips-mhz = <250>; > + dynamic-power-coefficient = <70>; > + }; > + > + cpu4: cpu@400 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0400>; > + enable-method = "psci"; > + cpu-idle-states = <&ENYO_CPU_SLEEP>; > + capacity-dmips-mhz = <620>; > + dynamic-power-coefficient = <284>; > + }; > + > + cpu5: cpu@500 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0500>; > + enable-method = "psci"; > + cpu-idle-states = <&ENYO_CPU_SLEEP>; > + capacity-dmips-mhz = <620>; > + dynamic-power-coefficient = <284>; > + }; > + > + cpu6: cpu@600 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0600>; > + enable-method = "psci"; > + cpu-idle-states = <&HERA_CPU_SLEEP>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <650>; > + }; > + > + cpu7: cpu@700 { > + device_type = "cpu"; > + compatible = "arm,armv8"; > + reg = <0x0 0x0700>; > + enable-method = "psci"; > + cpu-idle-states = <&HERA_CPU_SLEEP>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <650>; > + }; > + > + idle-states { > + entry-method = "psci"; > + > + ANANKE_CPU_SLEEP: cpu-ananke-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <70>; > + exit-latency-us = <160>; > + min-residency-us = <2000>; > + }; > + > + ENYO_CPU_SLEEP: cpu-enyo-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <150>; > + exit-latency-us = <190>; > + min-residency-us = <2500>; > + }; > + > + HERA_CPU_SLEEP: cpu-hera-sleep { > + idle-state-name = "c2"; > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <235>; > + exit-latency-us = <220>; > + min-residency-us = <3500>; > + }; > + }; > + }; > + > + /* bootloader requires ect node */ > + ect { > + parameter_address = <0x90000000>; > + parameter_size = <0x53000>; > + }; The bootloader doesn't work if you just remove this? > + > + ext_24_5m: clock-1 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24576000>; The frequency is probably should be set in board dts file. Because the crystal is actually soldered on the board, not in SoC. > + clock-output-names = "oscclk"; > + }; > + > + ext_200m: clock-2 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <200000000>; Ditto. > + clock-output-names = "ext-200m"; > + }; > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + reserved_memory: reserved-memory { > + #address-cells = <2>; Doesn't look like 2-cell address is really needed here. > + #size-cells = <1>; > + ranges; > + > + gsa_reserved_protected: gsa@90200000 { > + reg = <0x0 0x90200000 0x400000>; > + no-map; > + }; > + > + tpu_fw_reserved: tpu-fw@93000000 { > + reg = <0x0 0x93000000 0x1000000>; > + no-map; > + }; > + > + aoc_reserve: aoc@94000000 { > + reg = <0x0 0x94000000 0x03000000>; > + no-map; > + }; > + > + abl_reserved: abl@f8800000 { > + reg = <0x0 0xf8800000 0x02000000>; > + no-map; > + }; > + > + dss_log_reserved: dss-log-reserved@fd3f0000 { > + reg = <0 0xfd3f0000 0x0000e000>; > + no-map; > + }; > + > + debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 { > + reg = <0 0xfd3fe000 0x00001000>; > + no-map; > + }; > + > + bldr_log_reserved: bldr-log-reserved@fd800000 { > + reg = <0 0xfd800000 0x00100000>; > + no-map; > + }; > + > + bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 { > + reg = <0 0xfd900000 0x00002000>; > + no-map; > + }; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; > + clock-frequency = <24576000>; > + }; > + > + soc: soc@0 { > + compatible = "simple-bus"; > + #address-cells = <2>; Is 2 cells are really needed for the addresses in this node? I only see 32-bit addresses below in reg properties. > + #size-cells = <1>; > + ranges; > + > + cmu_misc: clock-controller@10010000 { > + compatible = "google,gs101-cmu-misc"; > + reg = <0x0 0x10010000 0x8000>; > + #clock-cells = <1>; > + clocks = <&ext_24_5m>, <&cmu_top CLK_DOUT_MISC_BUS>; > + clock-names = "oscclk", "dout_cmu_misc_bus"; > + }; > + > + watchdog_cl0: watchdog@10060000 { > + compatible = "google,gs101-wdt"; > + reg = <0x0 0x10060000 0x100>; > + interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0>, <&ext_24_5m>; > + clock-names = "watchdog", "watchdog_src"; > + samsung,syscon-phandle = <&pmu_system_controller>; > + samsung,cluster-index = <0>; > + }; > + > + watchdog_cl1: watchdog@10070000 { > + compatible = "google,gs101-wdt"; > + reg = <0x0 0x10070000 0x100>; > + interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1>, <&ext_24_5m>; > + clock-names = "watchdog", "watchdog_src"; > + samsung,syscon-phandle = <&pmu_system_controller>; > + samsung,cluster-index = <1>; > + status = "disabled"; > + }; > + > + gic: interrupt-controller@10400000 { > + compatible = "arm,gic-v3"; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x0 0x10400000 0x10000>, /* GICD */ > + <0x0 0x10440000 0x100000>; /* GICR * 8 */ > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + sysreg_peric0: syscon@10821000 { > + compatible = "google,gs101-peric0-sysreg", "syscon"; > + reg = <0x0 0x10821000 0x40000>; > + }; > + > + /* GPIO_PERIC0 */ This comment won't be needed if you rename pinctrl_4 -> pinctrl_peric0 :) > + pinctrl_4: pinctrl@10840000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x10840000 0x00001000>; > + interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + serial_0: serial@10a00000 { > + compatible = "google,gs101-uart"; > + reg = <0x0 0x10a00000 0xc0>; > + reg-io-width = <4>; > + samsung,uart-fifosize = <256>; > + interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&dummy_clk 0>, <&dummy_clk 0>; > + clock-names = "uart", "clk_uart_baud0"; > + }; Does this SoC have USI blocks? If so, maybe this node should be made a children of some USI node? > + > + /* GPIO_PERIC1 */ > + pinctrl_5: pinctrl@10c40000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x10C40000 0x00001000>; > + interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + sysreg_peric1: syscon@10c21000 { > + compatible = "google,gs101-peric1-sysreg", "syscon"; > + reg = <0x0 0x10C21000 0x40000>; > + }; > + > + /* GPIO_HSI1 */ > + pinctrl_6: pinctrl@11840000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x11840000 0x00001000>; > + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + /* GPIO_HSI2 */ > + pinctrl_7: pinctrl@14440000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x14440000 0x00001000>; > + interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + cmu_apm: clock-controller@17400000 { > + compatible = "google,gs101-cmu-apm"; > + reg = <0x0 0x17400000 0x8000>; > + #clock-cells = <1>; > + > + clocks = <&ext_24_5m>; > + clock-names = "oscclk"; > + }; > + > + sysreg_apm: syscon@174204e0 { > + compatible = "google,gs101-apm-sysreg", "syscon"; > + reg = <0x0 0x174204e0 0x1000>; > + }; Sure it doesn't need any clock? I remember having some issues until I declared a clock for some Exynos850 sysreg node. > + > + pmu_system_controller: system-controller@17460000 { > + compatible = "google,gs101-pmu", "syscon"; > + reg = <0x0 0x17460000 0x10000>; > + }; > + > + /* GPIO_ALIVE */ > + pinctrl_0: pinctrl@174d0000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x174d0000 0x00001000>; > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; Are you sure all those interrupts are actually needed? Please check this patch: daeb1c2b50fb ("arm64: dts: exynos: drop incorrectly placed wakeup interrupts in Exynos850"). If you decide to remove those interrupts, then bindings doc should be changed too I guess. > + > + wakeup-interrupt-controller { > + compatible = "google,gs101-wakeup-eint"; > + }; > + }; > + > + /* GPIO_FAR_ALIVE */ > + pinctrl_1: pinctrl@174e0000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x174e0000 0x00001000>; > + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; > + > + wakeup-interrupt-controller { > + compatible = "google,gs101-wakeup-eint"; > + }; > + }; > + > + /* GPIO_GSACTRL */ > + pinctrl_3: pinctrl@17940000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x17940000 0x00001000>; > + }; > + > + /* GPIO_GSACORE */ > + pinctrl_2: pinctrl@17a80000 { > + compatible = "google,gs101-pinctrl"; > + reg = <0x0 0x17a80000 0x00001000>; > + }; > + > + cmu_top: clock-controller@1e080000 { Move it up to other cmus, to make nodes under soc ordered alphabetically? > + compatible = "google,gs101-cmu-top"; > + reg = <0x0 0x1e080000 0x8000>; > + #clock-cells = <1>; > + > + clocks = <&ext_24_5m>; > + clock-names = "oscclk"; > + }; > + }; > +}; > + > +#include "gs101-pinctrl.dtsi" > -- > 2.42.0.655.g421f12c284-goog >
On 12/10/2023 09:23, Sam Protsenko wrote: >> + >> + cpu0: cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,armv8"; > > Is there maybe any more specific Cortex compatible? Thanks for noticing. It must be a specific compatible. This is *ONLY* for software models. I really wished people stopped upstreaming junk vendor DTS, but instead take recent, clean DTS and customize it. The approach with junk vendor DTS is always a pain. For everyone. Best regards, Krzysztof
Hi Krzysztof, On Thu, 12 Oct 2023 at 07:40, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > On 11/10/2023 20:48, Peter Griffin wrote: > > ... > > > diff --git a/arch/arm64/boot/dts/google/gs101.dtsi b/arch/arm64/boot/dts/google/gs101.dtsi > > new file mode 100644 > > index 000000000000..37fb0a4dc8d3 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/google/gs101.dtsi > > @@ -0,0 +1,504 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * GS101 SoC > > + * > > + * Copyright 2019-2023 Google LLC > > + * > > + */ > > + > > +#include <dt-bindings/clock/google,gs101.h> > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > + > > +/ { > > + compatible = "google,gs101"; > > + #address-cells = <2>; > > + #size-cells = <1>; > > + > > + interrupt-parent = <&gic>; > > + > > + aliases { > > + pinctrl0 = &pinctrl_0; > > + pinctrl1 = &pinctrl_1; > > + pinctrl2 = &pinctrl_2; > > + pinctrl3 = &pinctrl_3; > > + pinctrl4 = &pinctrl_4; > > + pinctrl5 = &pinctrl_5; > > + pinctrl6 = &pinctrl_6; > > + pinctrl7 = &pinctrl_7; > > + serial0 = &serial_0; > > + }; > > + > > + arm-pmu { > > pmu-0 will fix > > > + compatible = "arm,armv8-pmuv3"; > > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; > > + }; > > + > > + dsu-pmu-0 { > > pmu-1 will fix > > > > + compatible = "arm,dsu-pmu"; > > + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>; > > + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, > > + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; > > + }; > > + > > + /* TODO replace with CCF clock */ > > + dummy_clk: oscillator { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <12345>; > > + clock-output-names = "pclk"; > > + }; > > + > > + cpus { > > + #address-cells = <2>; > > + #size-cells = <0>; > > + > > + cpu-map { > > + cluster0 { > > + core0 { > > + cpu = <&cpu0>; > > + }; > > + core1 { > > + cpu = <&cpu1>; > > + }; > > + core2 { > > + cpu = <&cpu2>; > > + }; > > + core3 { > > + cpu = <&cpu3>; > > + }; > > + }; > > + > > + cluster1 { > > + core0 { > > + cpu = <&cpu4>; > > + }; > > + core1 { > > + cpu = <&cpu5>; > > + }; > > + }; > > + > > + cluster2 { > > + core0 { > > + cpu = <&cpu6>; > > + }; > > + core1 { > > + cpu = <&cpu7>; > > + }; > > + }; > > + }; > > + > > + cpu0: cpu@0 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0000>; > > + enable-method = "psci"; > > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > > + capacity-dmips-mhz = <250>; > > + dynamic-power-coefficient = <70>; > > + }; > > + > > + cpu1: cpu@100 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0100>; > > + enable-method = "psci"; > > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > > + capacity-dmips-mhz = <250>; > > + dynamic-power-coefficient = <70>; > > + }; > > + > > + cpu2: cpu@200 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0200>; > > + enable-method = "psci"; > > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > > + capacity-dmips-mhz = <250>; > > + dynamic-power-coefficient = <70>; > > + }; > > + > > + cpu3: cpu@300 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0300>; > > + enable-method = "psci"; > > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > > + capacity-dmips-mhz = <250>; > > + dynamic-power-coefficient = <70>; > > + }; > > + > > + cpu4: cpu@400 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0400>; > > + enable-method = "psci"; > > + cpu-idle-states = <&ENYO_CPU_SLEEP>; > > + capacity-dmips-mhz = <620>; > > + dynamic-power-coefficient = <284>; > > + }; > > + > > + cpu5: cpu@500 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0500>; > > + enable-method = "psci"; > > + cpu-idle-states = <&ENYO_CPU_SLEEP>; > > + capacity-dmips-mhz = <620>; > > + dynamic-power-coefficient = <284>; > > + }; > > + > > + cpu6: cpu@600 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0600>; > > + enable-method = "psci"; > > + cpu-idle-states = <&HERA_CPU_SLEEP>; > > + capacity-dmips-mhz = <1024>; > > + dynamic-power-coefficient = <650>; > > + }; > > + > > + cpu7: cpu@700 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0700>; > > + enable-method = "psci"; > > + cpu-idle-states = <&HERA_CPU_SLEEP>; > > + capacity-dmips-mhz = <1024>; > > + dynamic-power-coefficient = <650>; > > + }; > > + > > + idle-states { > > + entry-method = "psci"; > > + > > + ANANKE_CPU_SLEEP: cpu-ananke-sleep { > > + idle-state-name = "c2"; > > + compatible = "arm,idle-state"; > > + arm,psci-suspend-param = <0x0010000>; > > + entry-latency-us = <70>; > > + exit-latency-us = <160>; > > + min-residency-us = <2000>; > > + }; > > + > > + ENYO_CPU_SLEEP: cpu-enyo-sleep { > > + idle-state-name = "c2"; > > + compatible = "arm,idle-state"; > > + arm,psci-suspend-param = <0x0010000>; > > + entry-latency-us = <150>; > > + exit-latency-us = <190>; > > + min-residency-us = <2500>; > > + }; > > + > > + HERA_CPU_SLEEP: cpu-hera-sleep { > > + idle-state-name = "c2"; > > + compatible = "arm,idle-state"; > > + arm,psci-suspend-param = <0x0010000>; > > + entry-latency-us = <235>; > > + exit-latency-us = <220>; > > + min-residency-us = <3500>; > > + }; > > + }; > > + }; > > + > > + /* bootloader requires ect node */ > > + ect { > > This needs bindings. I experimented a bit more and the minimum I need is an empty dt node called ect, otherwise the bootloader will boot loop and we can't boot the kernel [ 2.977870] [E] [BOOT] fdt /ect path not found -1 Apart from a comment indicating that the bootloader requires this empty ect dt node, what other bindings documentation would you like to see? Something in google.yaml? > > > + parameter_address = <0x90000000>; > > No underscores in property names. Use hyphen. > > > + parameter_size = <0x53000>; > > No underscores. Fortunately I can remove parameter_address and parameter_size and still boot, so I will remove these in the next version. Thanks, Peter.
Hi Krzysztof, On Thu, 12 Oct 2023 at 07:44, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > On 11/10/2023 20:48, Peter Griffin wrote: > > Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6, > > (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile > > phones. It features: > > * 4xA55 little cluster > > * 2xA76 Mid cluster > > * 2xX1 Big cluster > > > > ... > > > + gpa10: gpa10-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + uart15_bus: uart15-bus-pins { > > + samsung,pins = "gpa2-3", "gpa2-4"; > > + samsung,pin-function = <2>; > > GS101_PIN_FUNC_2 will fix > > > + samsung,pin-pud = <0>; > > GS101_PIN_PULL_NONE will fix > > > + }; > > + > > + uart16_bus: uart16-bus-pins { > > + samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3"; > > + samsung,pin-function = <GS101_PIN_FUNC_2>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > But here it is correct... > > > + }; > > + > > + uart16_bus_rts: uart1-bus-rts-pins { > > + samsung,pins = "gpa3-2"; > > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-val = <1>; > > Why do you set UART RTS pin value? It's a remnant from the downstream drivers that support rts-gpio control. I will remove the samsung,pin-val = <1> in the next version. Thanks, Peter
On 25/11/2023 00:22, Peter Griffin wrote: >>> + >>> + /* bootloader requires ect node */ >>> + ect { >> >> This needs bindings. > > I experimented a bit more and the minimum I need is an empty dt node > called ect, otherwise the bootloader will boot loop and we can't boot > the kernel > [ 2.977870] [E] [BOOT] fdt /ect path not found -1 > > Apart from a comment indicating that the bootloader requires this > empty ect dt node, what other bindings documentation would you like to > see? Something in google.yaml? Yes, it would be enough. Best regards, Krzysztof
Hi Sam, Thanks for your review. Apologies I missed this in v4 series. See my comments inline below. On Thu, 12 Oct 2023 at 08:23, Sam Protsenko <semen.protsenko@linaro.org> wrote: > > On Wed, Oct 11, 2023 at 1:49 PM Peter Griffin <peter.griffin@linaro.org> wrote: > > > > Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6, > > (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile > > phones. It features: > > * 4xA55 little cluster > > * 2xA76 Mid cluster > > * 2xX1 Big cluster > > > > This commit adds the basic device tree for gs101 (SoC). > > Further platform support will be added over time. > > > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > > --- > > arch/arm64/Kconfig.platforms | 6 + > > arch/arm64/boot/dts/Makefile | 1 + > > arch/arm64/boot/dts/google/gs101-pinctrl.dtsi | 1275 +++++++++++++++++ > > arch/arm64/boot/dts/google/gs101-pinctrl.h | 32 + > > arch/arm64/boot/dts/google/gs101.dtsi | 504 +++++++ > > 5 files changed, 1818 insertions(+) > > create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > > create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.h > > create mode 100644 arch/arm64/boot/dts/google/gs101.dtsi > > > > diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms > > index 6069120199bb..a5ed1b719488 100644 > > --- a/arch/arm64/Kconfig.platforms > > +++ b/arch/arm64/Kconfig.platforms > > @@ -107,6 +107,12 @@ config ARCH_EXYNOS > > help > > This enables support for ARMv8 based Samsung Exynos SoC family. > > > > +config ARCH_GOOGLE_TENSOR > > + bool "Google Tensor SoC fmaily" > > + depends on ARCH_EXYNOS > > + help > > + Support for ARMv8 based Google Tensor platforms. > > + > > config ARCH_SPARX5 > > bool "Microchip Sparx5 SoC family" > > select PINCTRL > > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile > > index 30dd6347a929..a4ee7b628114 100644 > > --- a/arch/arm64/boot/dts/Makefile > > +++ b/arch/arm64/boot/dts/Makefile > > @@ -13,6 +13,7 @@ subdir-y += broadcom > > subdir-y += cavium > > subdir-y += exynos > > subdir-y += freescale > > +subdir-y += google > > subdir-y += hisilicon > > subdir-y += intel > > subdir-y += lg > > diff --git a/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > > new file mode 100644 > > index 000000000000..ba88000c3ed8 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi > > @@ -0,0 +1,1275 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * GS101 SoC pin-mux and pin-config device tree source > > + * > > + * Copyright 2019-2023 Google LLC > > + * > > This line is not needed. Also, maybe also add Linaro copyright here? Will fix > > > + */ > > + > > +#include "gs101-pinctrl.h" > > + > > +/* GPIO_ALIVE */ > > +&pinctrl_0 { > > Why not just rename it to pinctrl_alive and remove the comment? The > same goes for all pinctrl nodes below. Will fix > > > + gpa0: gpa0-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, > > Here and further: please align it to be at the same indentation level > as above line. Will fix > > > + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpa1: gpa1-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpa2: gpa2-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpa3: gpa3-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpa4: gpa4-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpa5: gpa5-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpa9: gpa9-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpa10: gpa10-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + uart15_bus: uart15-bus-pins { > > + samsung,pins = "gpa2-3", "gpa2-4"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > Could above two lines be replaced with some meaningful consts? I see > it's done below. Will fix > > > + }; > > + > > + uart16_bus: uart16-bus-pins { > > + samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3"; > > + samsung,pin-function = <GS101_PIN_FUNC_2>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + }; > > + > > + uart16_bus_rts: uart1-bus-rts-pins { > > + samsung,pins = "gpa3-2"; > > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-val = <1>; > > + }; > > + > > + uart16_bus_tx_dat: uart1-bus-tx-dat-pins { > > + samsung,pins = "gpa3-1"; > > + samsung,pin-val = <1>; > > + }; > > + > > + uart16_bus_tx_con: uart1-bus-tx-con-pins { > > + samsung,pins = "gpa3-1"; > > + samsung,pin-function = <1>; > > Named const? Will fix > > > + }; > > + > > + uart17_bus: uart17-bus-pins { > > + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > Here and further: if possible, try to use named constants. Will fix throughout. > > > + }; > > + > > + spi15_bus: spi15-bus-pins { > > + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2"; > > + samsung,pin-function = <GS101_PIN_FUNC_2>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi15_cs: spi15-cs-pins { > > + samsung,pins = "gpa4-3"; > > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > +}; > > + > > +/* GPIO_FAR_ALIVE */ > > +&pinctrl_1 { > > + gpa6: gpa6-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpa7: gpa7-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpa8: gpa8-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpa11: gpa11-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > +}; > > + > > +/* GPIO_GSACORE */ > > +&pinctrl_2 { > > + gps0: gps0-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gps1: gps1-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gps2: gps2-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > +}; > > + > > +/* GPIO_GSACTRL */ > > +&pinctrl_3 { > > + gps3: gps3-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > +}; > > + > > +/* GPIO_HSI1 */ > > +&pinctrl_6 { > > + gph0: gph0-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gph1: gph1-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + pcie0_clkreq: pcie0-clkreq-pins{ > > + samsung,pins = "gph0-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > > + samsung,pin-con-pdn = <3>; > > + samsung,pin-pud-pdn = <3>; > > What are those two properties? I don't see them documented in > dt-bindings or being mentioned in the driver. These properties have been in the samsung pinctrl driver since it was upstreamed by Linaro in 2012 :) They are used for pin function and pull up/down config in power down mode. See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml > > > + }; > > + > > + pcie0_perst: pcie0-perst-pins { > > + samsung,pins = "gph0-0"; > > + samsung,pin-function = <1>; > > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > > + samsung,pin-con-pdn = <3>; > > + }; > > +}; > > + > > +/* GPIO_HSI2 */ > > +&pinctrl_7 { > > + gph2: gph2-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gph3: gph3-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gph4: gph4-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + sd2_clk: sd2-clk-pins { > > + samsung,pins = "gph4-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > > + }; > > + > > + sd2_cmd: sd2-cmd-pins { > > + samsung,pins = "gph4-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > > + }; > > + > > + sd2_bus1: sd2-bus-width1-pins { > > + samsung,pins = "gph4-2"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > > + }; > > + > > + sd2_bus4: sd2-bus-width4-pins { > > + samsung,pins = "gph4-3", "gph4-4", "gph4-5"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > > + }; > > + > > + sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins { > > + samsung,pins = "gph4-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins { > > + samsung,pins = "gph4-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins { > > + samsung,pins = "gph4-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; > > + }; > > + > > + sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins { > > + samsung,pins = "gph4-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > > + }; > > + > > + ufs_rst_n: ufs-rst-n-pins { > > + samsung,pins = "gph3-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-con-pdn = <3>; > > + samsung,pin-pud-pdn = <0>; > > + }; > > + > > + ufs_refclk_out: ufs-refclk-out-pins { > > + samsung,pins = "gph3-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-con-pdn = <3>; > > + samsung,pin-pud-pdn = <0>; > > + }; > > + > > + pcie1_clkreq: pcie1-clkreq-pins { > > + samsung,pins = "gph2-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > > + samsung,pin-con-pdn = <3>; > > + samsung,pin-pud-pdn = <3>; > > + }; > > + > > + pcie1_perst: pcie1-perst-pins { > > + samsung,pins = "gph2-0"; > > + samsung,pin-function = <1>; > > + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; > > + samsung,pin-con-pdn = <3>; > > + }; > > +}; > > + > > +/* GPIO_PERIC0 */ > > +&pinctrl_4 { > > + gpp0: gpp0-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp1: gpp1-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp2: gpp2-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp3: gpp3-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp4: gpp4-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp5: gpp5-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp6: gpp6-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp7: gpp7-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp8: gpp8-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp9: gpp9-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp10: gpp10-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp11: gpp11-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp12: gpp12-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp13: gpp13-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp14: gpp14-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp15: gpp15-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp16: gpp16-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp17: gpp17-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp18: gpp18-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp19: gpp19-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + /* USI_PERIC0_UART_DBG */ > > + uart0_bus: uart0-bus-pins { > > + samsung,pins = "gpp1-2", "gpp1-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + disp_te_pri_on: disp-te-pri-on-pins { > > + samsung,pins = "gpp0-3"; > > + samsung,pin-function = <0xf>; > > + }; > > + > > + disp_te_pri_off: disp-te-pri-off-pins { > > + samsung,pins = "gpp0-3"; > > + samsung,pin-function = <0>; > > + }; > > + > > + disp_te_sec_on: disp-te-sec-on-pins { > > + samsung,pins = "gpp0-4"; > > + samsung,pin-function = <0xf>; > > + }; > > + > > + disp_te_sec_off: disp-te-sec-off-pins { > > + samsung,pins = "gpp0-4"; > > + samsung,pin-function = <0>; > > + }; > > + > > + sensor_mclk1_out: sensor-mclk1-out-pins { > > + samsung,pins = "gpp3-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk1_fn: sensor-mclk1-fn-pins { > > + samsung,pins = "gpp3-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_2>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk2_out: sensor-mclk2-out-pins { > > + samsung,pins = "gpp5-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk2_fn: sensor-mclk2-fn-pins { > > + samsung,pins = "gpp5-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_2>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk3_out: sensor-mclk3-out-pins { > > + samsung,pins = "gpp7-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk3_fn: sensor-mclk3-fn-pins { > > + samsung,pins = "gpp7-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_2>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk4_out: sensor-mclk4-out-pins { > > + samsung,pins = "gpp9-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk4_fn: sensor-mclk4-fn-pins { > > + samsung,pins = "gpp9-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_2>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk5_out: sensor-mclk5-out-pins { > > + samsung,pins = "gpp11-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk5_fn: sensor-mclk5-fn-pins { > > + samsung,pins = "gpp11-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_2>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk6_out: sensor-mclk6-out-pins { > > + samsung,pins = "gpp13-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk6_fn: sensor-mclk6-fn-pins { > > + samsung,pins = "gpp13-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_2>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk7_out: sensor-mclk7-out-pins { > > + samsung,pins = "gpp15-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk7_fn: sensor-mclk7-fn-pins { > > + samsung,pins = "gpp15-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_2>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk8_out: sensor-mclk8-out-pins { > > + samsung,pins = "gpp17-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > > + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + sensor_mclk8_fn: sensor-mclk8-fn-pins { > > + samsung,pins = "gpp17-0"; > > + samsung,pin-function = <GS101_PIN_FUNC_2>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; > > + }; > > + > > + hsi2c14_bus: hsi2c14-bus-pins { > > + samsung,pins = "gpp18-0", "gpp18-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + uart14_bus_single: uart14-bus-pins { > > + samsung,pins = "gpp18-0", "gpp18-1", > > + "gpp18-2", "gpp18-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi14_bus: spi14-bus-pins { > > + samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi14_cs: spi14-cs-pins { > > + samsung,pins = "gpp18-3"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi14_cs_func: spi14-cs-func-pins { > > + samsung,pins = "gpp18-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + hsi2c8_bus: hsi2c8-bus-pins { > > + samsung,pins = "gpp16-0", "gpp16-1"; > > + samsung,pin-function = <GS101_PIN_FUNC_3>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>; > > + }; > > + > > + uart8_bus_single: uart8-bus-pins { > > + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2", > > + "gpp16-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi8_bus: spi8-bus-pins { > > + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi8_cs: spi8-cs-pins { > > + samsung,pins = "gpp16-3"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi8_cs_func: spi8-cs-func-pins { > > + samsung,pins = "gpp16-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + hsi2c7_bus: hsi2c7-bus-pins { > > + samsung,pins = "gpp14-0", "gpp14-1"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + uart7_bus_single: uart7-bus-pins { > > + samsung,pins = "gpp14-0", "gpp14-1", > > + "gpp14-2", "gpp14-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi7_bus: spi7-bus-pins { > > + samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi7_cs: spi7-cs-pins { > > + samsung,pins = "gpp14-3"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi7_cs_func: spi7-cs-func-pins { > > + samsung,pins = "gpp14-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + hsi2c6_bus: hsi2c6-bus-pins { > > + samsung,pins = "gpp12-0", "gpp12-1"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + uart6_bus_single: uart6-bus-pins { > > + samsung,pins = "gpp12-0", "gpp12-1", > > + "gpp12-2", "gpp12-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi6_bus: spi6-bus-pins { > > + samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi6_cs: spi6-cs-pins { > > + samsung,pins = "gpp12-3"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi6_cs_func: spi6-cs-func-pins { > > + samsung,pins = "gpp12-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + hsi2c5_bus: hsi2c5-bus-pins { > > + samsung,pins = "gpp10-0", "gpp10-1"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + uart5_bus_single: uart5-bus-pins { > > + samsung,pins = "gpp10-0", "gpp10-1", > > + "gpp10-2", "gpp10-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi5_bus: spi5-bus-pins { > > + samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2"; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + samsung,pin-function = <GS101_PIN_FUNC_3>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; > > + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; > > + }; > > + > > + spi5_cs_func: spi5-cs-func-pins { > > + samsung,pins = "gpp10-3"; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + samsung,pin-function = <GS101_PIN_FUNC_3>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; > > + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; > > + }; > > + > > + hsi2c4_bus: hsi2c4-bus-pins { > > + samsung,pins = "gpp8-0", "gpp8-1"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + uart4_bus_single: uart4-bus-pins { > > + samsung,pins = "gpp8-0", "gpp8-1", > > + "gpp8-2", "gpp8-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi4_bus: spi4-bus-pins { > > + samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi4_cs: spi4-cs-pins { > > + samsung,pins = "gpp8-3"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi4_cs_func: spi4-cs-func-pins { > > + samsung,pins = "gpp8-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + hsi2c3_bus: hsi2c3-bus-pins { > > + samsung,pins = "gpp6-0", "gpp6-1"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + uart3_bus_single: uart3-bus-pins { > > + samsung,pins = "gpp6-0", "gpp6-1", > > + "gpp6-2", "gpp6-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi3_bus: spi3-bus-pins { > > + samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi3_cs: spi3-cs-pins { > > + samsung,pins = "gpp6-3"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi3_cs_func: spi3-cs-func-pins { > > + samsung,pins = "gpp6-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + hsi2c2_bus: hsi2c2-bus-pins { > > + samsung,pins = "gpp4-0", "gpp4-1"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + uart2_bus_single: uart2-bus-pins { > > + samsung,pins = "gpp4-0", "gpp4-1", > > + "gpp4-2", "gpp4-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi2_bus: spi2-bus-pins { > > + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi2_cs: spi2-cs-pins { > > + samsung,pins = "gpp4-3"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi2_cs_func: spi2-cs-func-pins { > > + samsung,pins = "gpp4-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + hsi2c1_bus: hsi2c1-bus-pins { > > + samsung,pins = "gpp2-0", "gpp2-1"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + uart1_bus_single: uart1-bus-pins { > > + samsung,pins = "gpp2-0", "gpp2-1", > > + "gpp2-2", "gpp2-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi1_bus: spi1-bus-pins { > > + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi1_cs: spi1-cs-pins { > > + samsung,pins = "gpp2-3"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi1_cs_func: spi1-cs-func-pins { > > + samsung,pins = "gpp2-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > +}; > > + > > +/* GPIO_PERIC1 */ > > +&pinctrl_5 { > > + gpp20: gpp20-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp21: gpp21-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp22: gpp22-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp23: gpp23-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp24: gpp24-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp25: gpp25-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp26: gpp26-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp27: gpp27-gpio-bank { > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + hsi2c13_bus: hsi2c13-bus-pins { > > + samsung,pins = "gpp25-0", "gpp25-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + uart13_bus_single: uart13-bus-pins { > > + samsung,pins = "gpp25-0", "gpp25-1", > > + "gpp25-2", "gpp25-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi13_bus: spi13-bus-pins { > > + samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi13_cs: spi13-cs-pins { > > + samsung,pins = "gpp25-3"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi13_cs_func: spi13-cs-func-pins { > > + samsung,pins = "gpp25-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + hsi2c12_bus: hsi2c12-bus-pins { > > + samsung,pins = "gpp23-4", "gpp23-5"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + uart12_bus_single: uart12-bus-pins { > > + samsung,pins = "gpp23-4", "gpp23-5", > > + "gpp23-6", "gpp23-7"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi12_bus: spi12-bus-pins { > > + samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi14_cs2: spi14-cs2-pins { > > + samsung,pins = "gpp23-6"; > > + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; > > + samsung,pin-pud = <GS101_PIN_PULL_NONE>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi12_cs: spi12-cs-pins { > > + samsung,pins = "gpp23-7"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi12_cs_func: spi12-cs-func-pins { > > + samsung,pins = "gpp23-7"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + hsi2c11_bus: hsi2c11-bus-pins { > > + samsung,pins = "gpp23-0", "gpp23-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + uart11_bus_single: uart11-bus-pins { > > + samsung,pins = "gpp23-0", "gpp23-1", > > + "gpp23-2", "gpp23-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi11_bus: spi11-bus-pins { > > + samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi11_cs: spi11-cs-pins { > > + samsung,pins = "gpp23-3"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi11_cs_func: spi11-cs-func-pins { > > + samsung,pins = "gpp23-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + hsi2c10_bus: hsi2c10-bus-pins { > > + samsung,pins = "gpp21-0", "gpp21-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + uart10_bus_single: uart10-bus-pins { > > + samsung,pins = "gpp21-0", "gpp21-1", > > + "gpp21-2", "gpp21-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi10_bus: spi10-bus-pins { > > + samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi10_cs: spi10-cs-pins { > > + samsung,pins = "gpp21-3"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi10_cs_func: spi10-cs-func-pins { > > + samsung,pins = "gpp21-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + hsi2c9_bus: hsi2c9-bus-pins { > > + samsung,pins = "gpp20-4", "gpp20-5"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + uart9_bus_single: uart9-bus-pins { > > + samsung,pins = "gpp20-4", "gpp20-5", > > + "gpp20-6", "gpp20-7"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi9_bus: spi9-bus-pins { > > + samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi9_cs: spi9-cs-pins { > > + samsung,pins = "gpp20-7"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi9_cs_func: spi9-cs-func-pins { > > + samsung,pins = "gpp20-7"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + hsi2c0_bus: hsi2c0-bus-pins { > > + samsung,pins = "gpp20-0", "gpp20-1"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + uart0_bus_single: uart0-bus-pins { > > + samsung,pins = "gpp20-0", "gpp20-1", > > + "gpp20-2", "gpp20-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + spi0_bus: spi0-bus-pins { > > + samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi0_cs: spi0-cs-pins { > > + samsung,pins = "gpp20-3"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > + > > + spi0_cs_func: spi0-cs-func-pins { > > + samsung,pins = "gpp20-3"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; > > + }; > > +}; > > + > > diff --git a/arch/arm64/boot/dts/google/gs101-pinctrl.h b/arch/arm64/boot/dts/google/gs101-pinctrl.h > > new file mode 100644 > > index 000000000000..16c54888f4bb > > --- /dev/null > > +++ b/arch/arm64/boot/dts/google/gs101-pinctrl.h > > @@ -0,0 +1,32 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * Pinctrl binding constants for GS101 > > + * > > + * Copyright (c) 2020-2023 Google, LLC. > > + */ > > + > > +#ifndef __DT_BINDINGS_PINCTRL_GS101_H__ > > +#define __DT_BINDINGS_PINCTRL_GS101_H__ > > + > > +#define GS101_PIN_PULL_NONE 0 > > +#define GS101_PIN_PULL_DOWN 1 > > +#define GS101_PIN_PULL_UP 3 > > + > > +/* Pin function in power down mode */ > > +#define GS101_PIN_PDN_OUT0 0 > > +#define GS101_PIN_PDN_OUT1 1 > > +#define GS101_PIN_PDN_INPUT 2 > > +#define GS101_PIN_PDN_PREV 3 > > + > > +/* GS101 drive strengths */ > > +#define GS101_PIN_DRV_2_5_MA 0 > > +#define GS101_PIN_DRV_5_MA 1 > > +#define GS101_PIN_DRV_7_5_MA 2 > > +#define GS101_PIN_DRV_10_MA 3 > > + > > +#define GS101_PIN_FUNC_INPUT 0 > > +#define GS101_PIN_FUNC_OUTPUT 1 > > +#define GS101_PIN_FUNC_2 2 > > +#define GS101_PIN_FUNC_3 3 > > + > > Maybe it's possible to somehow re-use already existing values in > arch/arm64/boot/dts/exynos/exynos-pinctrl.h? That is actually how it was in the first submission. The review feedback was not to do that and have a dedicated gs101 header. > > > +#endif /* __DT_BINDINGS_PINCTRL_GS101_H__ */ > > diff --git a/arch/arm64/boot/dts/google/gs101.dtsi b/arch/arm64/boot/dts/google/gs101.dtsi > > new file mode 100644 > > index 000000000000..37fb0a4dc8d3 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/google/gs101.dtsi > > @@ -0,0 +1,504 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * GS101 SoC > > + * > > + * Copyright 2019-2023 Google LLC > > + * > > This line is not needed. Also (but not sure): maybe add the author and > Linaro copyright? Will fix > > > + */ > > + > > +#include <dt-bindings/clock/google,gs101.h> > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > + > > +/ { > > + compatible = "google,gs101"; > > + #address-cells = <2>; > > + #size-cells = <1>; > > + > > + interrupt-parent = <&gic>; > > + > > + aliases { > > + pinctrl0 = &pinctrl_0; > > + pinctrl1 = &pinctrl_1; > > + pinctrl2 = &pinctrl_2; > > + pinctrl3 = &pinctrl_3; > > + pinctrl4 = &pinctrl_4; > > + pinctrl5 = &pinctrl_5; > > + pinctrl6 = &pinctrl_6; > > + pinctrl7 = &pinctrl_7; > > + serial0 = &serial_0; > > + }; > > + > > + arm-pmu { > > + compatible = "arm,armv8-pmuv3"; > > Is there any more specifi Cortex PMU compatible for this chip? Yes will fix. > > > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; > > Please try to keep it to 80 characters per line. Will fix > > > + }; > > + > > + dsu-pmu-0 { > > + compatible = "arm,dsu-pmu"; > > + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>; > > + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, > > + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; > > + }; > > + > > + /* TODO replace with CCF clock */ > > + dummy_clk: oscillator { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <12345>; > > + clock-output-names = "pclk"; > > + }; > > + > > + cpus { > > + #address-cells = <2>; > > Why 2-cells is needed here? If you make it 1, all below reg properties > can be made 1-cell, which removes not needed 0x0. Will fix > > > + #size-cells = <0>; > > + > > + cpu-map { > > + cluster0 { > > + core0 { > > + cpu = <&cpu0>; > > + }; > > + core1 { > > + cpu = <&cpu1>; > > + }; > > + core2 { > > + cpu = <&cpu2>; > > + }; > > + core3 { > > + cpu = <&cpu3>; > > + }; > > + }; > > + > > + cluster1 { > > + core0 { > > + cpu = <&cpu4>; > > + }; > > + core1 { > > + cpu = <&cpu5>; > > + }; > > + }; > > + > > + cluster2 { > > + core0 { > > + cpu = <&cpu6>; > > + }; > > + core1 { > > + cpu = <&cpu7>; > > + }; > > + }; > > + }; > > + > > + cpu0: cpu@0 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > Is there maybe any more specific Cortex compatible? Yes, will fix > > > + reg = <0x0 0x0000>; > > + enable-method = "psci"; > > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > > + capacity-dmips-mhz = <250>; > > + dynamic-power-coefficient = <70>; > > + }; > > + > > + cpu1: cpu@100 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0100>; > > + enable-method = "psci"; > > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > > + capacity-dmips-mhz = <250>; > > + dynamic-power-coefficient = <70>; > > + }; > > + > > + cpu2: cpu@200 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0200>; > > + enable-method = "psci"; > > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > > + capacity-dmips-mhz = <250>; > > + dynamic-power-coefficient = <70>; > > + }; > > + > > + cpu3: cpu@300 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0300>; > > + enable-method = "psci"; > > + cpu-idle-states = <&ANANKE_CPU_SLEEP>; > > + capacity-dmips-mhz = <250>; > > + dynamic-power-coefficient = <70>; > > + }; > > + > > + cpu4: cpu@400 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0400>; > > + enable-method = "psci"; > > + cpu-idle-states = <&ENYO_CPU_SLEEP>; > > + capacity-dmips-mhz = <620>; > > + dynamic-power-coefficient = <284>; > > + }; > > + > > + cpu5: cpu@500 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0500>; > > + enable-method = "psci"; > > + cpu-idle-states = <&ENYO_CPU_SLEEP>; > > + capacity-dmips-mhz = <620>; > > + dynamic-power-coefficient = <284>; > > + }; > > + > > + cpu6: cpu@600 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0600>; > > + enable-method = "psci"; > > + cpu-idle-states = <&HERA_CPU_SLEEP>; > > + capacity-dmips-mhz = <1024>; > > + dynamic-power-coefficient = <650>; > > + }; > > + > > + cpu7: cpu@700 { > > + device_type = "cpu"; > > + compatible = "arm,armv8"; > > + reg = <0x0 0x0700>; > > + enable-method = "psci"; > > + cpu-idle-states = <&HERA_CPU_SLEEP>; > > + capacity-dmips-mhz = <1024>; > > + dynamic-power-coefficient = <650>; > > + }; > > + > > + idle-states { > > + entry-method = "psci"; > > + > > + ANANKE_CPU_SLEEP: cpu-ananke-sleep { > > + idle-state-name = "c2"; > > + compatible = "arm,idle-state"; > > + arm,psci-suspend-param = <0x0010000>; > > + entry-latency-us = <70>; > > + exit-latency-us = <160>; > > + min-residency-us = <2000>; > > + }; > > + > > + ENYO_CPU_SLEEP: cpu-enyo-sleep { > > + idle-state-name = "c2"; > > + compatible = "arm,idle-state"; > > + arm,psci-suspend-param = <0x0010000>; > > + entry-latency-us = <150>; > > + exit-latency-us = <190>; > > + min-residency-us = <2500>; > > + }; > > + > > + HERA_CPU_SLEEP: cpu-hera-sleep { > > + idle-state-name = "c2"; > > + compatible = "arm,idle-state"; > > + arm,psci-suspend-param = <0x0010000>; > > + entry-latency-us = <235>; > > + exit-latency-us = <220>; > > + min-residency-us = <3500>; > > + }; > > + }; > > + }; > > + > > + /* bootloader requires ect node */ > > + ect { > > + parameter_address = <0x90000000>; > > + parameter_size = <0x53000>; > > + }; > > The bootloader doesn't work if you just remove this? That is correct, it boot loops failing to find the ect node in the bootloader. I did some more investigation and we can actually remove parameter_address and parameter_size properties but the empty ect node needs to be present to boot the kernel. > > > + > > + ext_24_5m: clock-1 { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <24576000>; > > The frequency is probably should be set in board dts file. Because the > crystal is actually soldered on the board, not in SoC. Will move. Although Xtal can only be 24576000 for this SoC. > > > + clock-output-names = "oscclk"; > > + }; > > + > > + ext_200m: clock-2 { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <200000000>; > > Ditto. Will fix > > > + clock-output-names = "ext-200m"; > > + }; > > + > > + psci { > > + compatible = "arm,psci-1.0"; > > + method = "smc"; > > + }; > > + > > + reserved_memory: reserved-memory { > > + #address-cells = <2>; > > Doesn't look like 2-cell address is really needed here. It is required, there is 8Gb of RAM on the board. > > > + #size-cells = <1>; > > + ranges; > > + > > + gsa_reserved_protected: gsa@90200000 { > > + reg = <0x0 0x90200000 0x400000>; > > + no-map; > > + }; > > + > > + tpu_fw_reserved: tpu-fw@93000000 { > > + reg = <0x0 0x93000000 0x1000000>; > > + no-map; > > + }; > > + > > + aoc_reserve: aoc@94000000 { > > + reg = <0x0 0x94000000 0x03000000>; > > + no-map; > > + }; > > + > > + abl_reserved: abl@f8800000 { > > + reg = <0x0 0xf8800000 0x02000000>; > > + no-map; > > + }; > > + > > + dss_log_reserved: dss-log-reserved@fd3f0000 { > > + reg = <0 0xfd3f0000 0x0000e000>; > > + no-map; > > + }; > > + > > + debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 { > > + reg = <0 0xfd3fe000 0x00001000>; > > + no-map; > > + }; > > + > > + bldr_log_reserved: bldr-log-reserved@fd800000 { > > + reg = <0 0xfd800000 0x00100000>; > > + no-map; > > + }; > > + > > + bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 { > > + reg = <0 0xfd900000 0x00002000>; > > + no-map; > > + }; > > + }; > > + > > + timer { > > + compatible = "arm,armv8-timer"; > > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; > > + clock-frequency = <24576000>; > > + }; > > + > > + soc: soc@0 { > > + compatible = "simple-bus"; > > + #address-cells = <2>; > > Is 2 cells are really needed for the addresses in this node? I only > see 32-bit addresses below in reg properties. It is a 36bit address bus, but I can add a ranges property to map the addresses and then use address-cells 1. So will fix in v5. > > > + #size-cells = <1>; > > + ranges; > > + > > + cmu_misc: clock-controller@10010000 { > > + compatible = "google,gs101-cmu-misc"; > > + reg = <0x0 0x10010000 0x8000>; > > + #clock-cells = <1>; > > + clocks = <&ext_24_5m>, <&cmu_top CLK_DOUT_MISC_BUS>; > > + clock-names = "oscclk", "dout_cmu_misc_bus"; > > + }; > > + > > + watchdog_cl0: watchdog@10060000 { > > + compatible = "google,gs101-wdt"; > > + reg = <0x0 0x10060000 0x100>; > > + interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0>, <&ext_24_5m>; > > + clock-names = "watchdog", "watchdog_src"; > > + samsung,syscon-phandle = <&pmu_system_controller>; > > + samsung,cluster-index = <0>; > > + }; > > + > > + watchdog_cl1: watchdog@10070000 { > > + compatible = "google,gs101-wdt"; > > + reg = <0x0 0x10070000 0x100>; > > + interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1>, <&ext_24_5m>; > > + clock-names = "watchdog", "watchdog_src"; > > + samsung,syscon-phandle = <&pmu_system_controller>; > > + samsung,cluster-index = <1>; > > + status = "disabled"; > > + }; > > + > > + gic: interrupt-controller@10400000 { > > + compatible = "arm,gic-v3"; > > + #interrupt-cells = <3>; > > + interrupt-controller; > > + reg = <0x0 0x10400000 0x10000>, /* GICD */ > > + <0x0 0x10440000 0x100000>; /* GICR * 8 */ > > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + sysreg_peric0: syscon@10821000 { > > + compatible = "google,gs101-peric0-sysreg", "syscon"; > > + reg = <0x0 0x10821000 0x40000>; > > + }; > > + > > + /* GPIO_PERIC0 */ > > This comment won't be needed if you rename pinctrl_4 -> pinctrl_peric0 :) Will fix > > > + pinctrl_4: pinctrl@10840000 { > > + compatible = "google,gs101-pinctrl"; > > + reg = <0x0 0x10840000 0x00001000>; > > + interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + serial_0: serial@10a00000 { > > + compatible = "google,gs101-uart"; > > + reg = <0x0 0x10a00000 0xc0>; > > + reg-io-width = <4>; > > + samsung,uart-fifosize = <256>; > > + interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&dummy_clk 0>, <&dummy_clk 0>; > > + clock-names = "uart", "clk_uart_baud0"; > > + }; > > Does this SoC have USI blocks? If so, maybe this node should be made a > children of some USI node? Yes it is part of a USI block. I will update this in v5. > > > + > > + /* GPIO_PERIC1 */ > > + pinctrl_5: pinctrl@10c40000 { > > + compatible = "google,gs101-pinctrl"; > > + reg = <0x0 0x10C40000 0x00001000>; > > + interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + sysreg_peric1: syscon@10c21000 { > > + compatible = "google,gs101-peric1-sysreg", "syscon"; > > + reg = <0x0 0x10C21000 0x40000>; > > + }; > > + > > + /* GPIO_HSI1 */ > > + pinctrl_6: pinctrl@11840000 { > > + compatible = "google,gs101-pinctrl"; > > + reg = <0x0 0x11840000 0x00001000>; > > + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + /* GPIO_HSI2 */ > > + pinctrl_7: pinctrl@14440000 { > > + compatible = "google,gs101-pinctrl"; > > + reg = <0x0 0x14440000 0x00001000>; > > + interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + cmu_apm: clock-controller@17400000 { > > + compatible = "google,gs101-cmu-apm"; > > + reg = <0x0 0x17400000 0x8000>; > > + #clock-cells = <1>; > > + > > + clocks = <&ext_24_5m>; > > + clock-names = "oscclk"; > > + }; > > + > > + sysreg_apm: syscon@174204e0 { > > + compatible = "google,gs101-apm-sysreg", "syscon"; > > + reg = <0x0 0x174204e0 0x1000>; > > + }; > > Sure it doesn't need any clock? I remember having some issues until I > declared a clock for some Exynos850 sysreg node. I deliberately left the clocks out for now. As APM has it's own firmware, mailbox I want to get more information on which entity is meant to be managing these clocks. > > > + > > + pmu_system_controller: system-controller@17460000 { > > + compatible = "google,gs101-pmu", "syscon"; > > + reg = <0x0 0x17460000 0x10000>; > > + }; > > + > > + /* GPIO_ALIVE */ > > + pinctrl_0: pinctrl@174d0000 { > > + compatible = "google,gs101-pinctrl"; > > + reg = <0x0 0x174d0000 0x00001000>; > > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > > Are you sure all those interrupts are actually needed? Please check > this patch: daeb1c2b50fb ("arm64: dts: exynos: drop incorrectly placed > wakeup interrupts in Exynos850"). If you decide to remove those > interrupts, then bindings doc should be changed too I guess. You were correct. fyi I fixed this in v4. > > > + > > + wakeup-interrupt-controller { > > + compatible = "google,gs101-wakeup-eint"; > > + }; > > + }; > > + > > + /* GPIO_FAR_ALIVE */ > > + pinctrl_1: pinctrl@174e0000 { > > + compatible = "google,gs101-pinctrl"; > > + reg = <0x0 0x174e0000 0x00001000>; > > + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; > > + > > + wakeup-interrupt-controller { > > + compatible = "google,gs101-wakeup-eint"; > > + }; > > + }; > > + > > + /* GPIO_GSACTRL */ > > + pinctrl_3: pinctrl@17940000 { > > + compatible = "google,gs101-pinctrl"; > > + reg = <0x0 0x17940000 0x00001000>; > > + }; > > + > > + /* GPIO_GSACORE */ > > + pinctrl_2: pinctrl@17a80000 { > > + compatible = "google,gs101-pinctrl"; > > + reg = <0x0 0x17a80000 0x00001000>; > > + }; > > + > > + cmu_top: clock-controller@1e080000 { > > Move it up to other cmus, to make nodes under soc ordered alphabetically? The nodes under SoC are ordered by reg address, which IIRC was requested in earlier review feedback. regards, Peter. > > > + compatible = "google,gs101-cmu-top"; > > + reg = <0x0 0x1e080000 0x8000>; > > + #clock-cells = <1>; > > + > > + clocks = <&ext_24_5m>; > > + clock-names = "oscclk"; > > + }; > > + }; > > +}; > > + > > +#include "gs101-pinctrl.dtsi" > > -- > > 2.42.0.655.g421f12c284-goog > >
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 6069120199bb..a5ed1b719488 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -107,6 +107,12 @@ config ARCH_EXYNOS help This enables support for ARMv8 based Samsung Exynos SoC family. +config ARCH_GOOGLE_TENSOR + bool "Google Tensor SoC fmaily" + depends on ARCH_EXYNOS + help + Support for ARMv8 based Google Tensor platforms. + config ARCH_SPARX5 bool "Microchip Sparx5 SoC family" select PINCTRL diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 30dd6347a929..a4ee7b628114 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -13,6 +13,7 @@ subdir-y += broadcom subdir-y += cavium subdir-y += exynos subdir-y += freescale +subdir-y += google subdir-y += hisilicon subdir-y += intel subdir-y += lg diff --git a/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi new file mode 100644 index 000000000000..ba88000c3ed8 --- /dev/null +++ b/arch/arm64/boot/dts/google/gs101-pinctrl.dtsi @@ -0,0 +1,1275 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GS101 SoC pin-mux and pin-config device tree source + * + * Copyright 2019-2023 Google LLC + * + */ + +#include "gs101-pinctrl.h" + +/* GPIO_ALIVE */ +&pinctrl_0 { + gpa0: gpa0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa1: gpa1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa2: gpa2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa3: gpa3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa4: gpa4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa5: gpa5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa9: gpa9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa10: gpa10-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + }; + + uart15_bus: uart15-bus-pins { + samsung,pins = "gpa2-3", "gpa2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + uart16_bus: uart16-bus-pins { + samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + uart16_bus_rts: uart1-bus-rts-pins { + samsung,pins = "gpa3-2"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-val = <1>; + }; + + uart16_bus_tx_dat: uart1-bus-tx-dat-pins { + samsung,pins = "gpa3-1"; + samsung,pin-val = <1>; + }; + + uart16_bus_tx_con: uart1-bus-tx-con-pins { + samsung,pins = "gpa3-1"; + samsung,pin-function = <1>; + }; + + uart17_bus: uart17-bus-pins { + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + spi15_bus: spi15-bus-pins { + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi15_cs: spi15-cs-pins { + samsung,pins = "gpa4-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; + +/* GPIO_FAR_ALIVE */ +&pinctrl_1 { + gpa6: gpa6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa7: gpa7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa8: gpa8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa11: gpa11-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +/* GPIO_GSACORE */ +&pinctrl_2 { + gps0: gps0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gps1: gps1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gps2: gps2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +/* GPIO_GSACTRL */ +&pinctrl_3 { + gps3: gps3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +/* GPIO_HSI1 */ +&pinctrl_6 { + gph0: gph0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcie0_clkreq: pcie0-clkreq-pins{ + samsung,pins = "gph0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <3>; + samsung,pin-pud-pdn = <3>; + }; + + pcie0_perst: pcie0-perst-pins { + samsung,pins = "gph0-0"; + samsung,pin-function = <1>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <3>; + }; +}; + +/* GPIO_HSI2 */ +&pinctrl_7 { + gph2: gph2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph3: gph3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph4: gph4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd2_clk: sd2-clk-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_cmd: sd2-cmd-pins { + samsung,pins = "gph4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_bus1: sd2-bus-width1-pins { + samsung,pins = "gph4-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_bus4: sd2-bus-width4-pins { + samsung,pins = "gph4-3", "gph4-4", "gph4-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + }; + + ufs_rst_n: ufs-rst-n-pins { + samsung,pins = "gph3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-con-pdn = <3>; + samsung,pin-pud-pdn = <0>; + }; + + ufs_refclk_out: ufs-refclk-out-pins { + samsung,pins = "gph3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-con-pdn = <3>; + samsung,pin-pud-pdn = <0>; + }; + + pcie1_clkreq: pcie1-clkreq-pins { + samsung,pins = "gph2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <3>; + samsung,pin-pud-pdn = <3>; + }; + + pcie1_perst: pcie1-perst-pins { + samsung,pins = "gph2-0"; + samsung,pin-function = <1>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <3>; + }; +}; + +/* GPIO_PERIC0 */ +&pinctrl_4 { + gpp0: gpp0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp1: gpp1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp2: gpp2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp3: gpp3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp4: gpp4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp5: gpp5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp6: gpp6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp7: gpp7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp8: gpp8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp9: gpp9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp10: gpp10-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp11: gpp11-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp12: gpp12-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp13: gpp13-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp14: gpp14-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp15: gpp15-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp16: gpp16-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp17: gpp17-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp18: gpp18-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp19: gpp19-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* USI_PERIC0_UART_DBG */ + uart0_bus: uart0-bus-pins { + samsung,pins = "gpp1-2", "gpp1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + disp_te_pri_on: disp-te-pri-on-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <0xf>; + }; + + disp_te_pri_off: disp-te-pri-off-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <0>; + }; + + disp_te_sec_on: disp-te-sec-on-pins { + samsung,pins = "gpp0-4"; + samsung,pin-function = <0xf>; + }; + + disp_te_sec_off: disp-te-sec-off-pins { + samsung,pins = "gpp0-4"; + samsung,pin-function = <0>; + }; + + sensor_mclk1_out: sensor-mclk1-out-pins { + samsung,pins = "gpp3-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk1_fn: sensor-mclk1-fn-pins { + samsung,pins = "gpp3-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk2_out: sensor-mclk2-out-pins { + samsung,pins = "gpp5-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk2_fn: sensor-mclk2-fn-pins { + samsung,pins = "gpp5-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk3_out: sensor-mclk3-out-pins { + samsung,pins = "gpp7-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk3_fn: sensor-mclk3-fn-pins { + samsung,pins = "gpp7-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk4_out: sensor-mclk4-out-pins { + samsung,pins = "gpp9-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk4_fn: sensor-mclk4-fn-pins { + samsung,pins = "gpp9-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk5_out: sensor-mclk5-out-pins { + samsung,pins = "gpp11-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk5_fn: sensor-mclk5-fn-pins { + samsung,pins = "gpp11-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk6_out: sensor-mclk6-out-pins { + samsung,pins = "gpp13-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk6_fn: sensor-mclk6-fn-pins { + samsung,pins = "gpp13-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk7_out: sensor-mclk7-out-pins { + samsung,pins = "gpp15-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk7_fn: sensor-mclk7-fn-pins { + samsung,pins = "gpp15-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk8_out: sensor-mclk8-out-pins { + samsung,pins = "gpp17-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk8_fn: sensor-mclk8-fn-pins { + samsung,pins = "gpp17-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + hsi2c14_bus: hsi2c14-bus-pins { + samsung,pins = "gpp18-0", "gpp18-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart14_bus_single: uart14-bus-pins { + samsung,pins = "gpp18-0", "gpp18-1", + "gpp18-2", "gpp18-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + spi14_bus: spi14-bus-pins { + samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi14_cs: spi14-cs-pins { + samsung,pins = "gpp18-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi14_cs_func: spi14-cs-func-pins { + samsung,pins = "gpp18-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c8_bus: hsi2c8-bus-pins { + samsung,pins = "gpp16-0", "gpp16-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>; + }; + + uart8_bus_single: uart8-bus-pins { + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2", + "gpp16-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + + spi8_bus: spi8-bus-pins { + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi8_cs: spi8-cs-pins { + samsung,pins = "gpp16-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi8_cs_func: spi8-cs-func-pins { + samsung,pins = "gpp16-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c7_bus: hsi2c7-bus-pins { + samsung,pins = "gpp14-0", "gpp14-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart7_bus_single: uart7-bus-pins { + samsung,pins = "gpp14-0", "gpp14-1", + "gpp14-2", "gpp14-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + + spi7_bus: spi7-bus-pins { + samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi7_cs: spi7-cs-pins { + samsung,pins = "gpp14-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi7_cs_func: spi7-cs-func-pins { + samsung,pins = "gpp14-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c6_bus: hsi2c6-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart6_bus_single: uart6-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1", + "gpp12-2", "gpp12-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + + spi6_bus: spi6-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi6_cs: spi6-cs-pins { + samsung,pins = "gpp12-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi6_cs_func: spi6-cs-func-pins { + samsung,pins = "gpp12-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c5_bus: hsi2c5-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart5_bus_single: uart5-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1", + "gpp10-2", "gpp10-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + + spi5_bus: spi5-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2"; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; + }; + + spi5_cs_func: spi5-cs-func-pins { + samsung,pins = "gpp10-3"; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; + }; + + hsi2c4_bus: hsi2c4-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart4_bus_single: uart4-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1", + "gpp8-2", "gpp8-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + + spi4_bus: spi4-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi4_cs: spi4-cs-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi4_cs_func: spi4-cs-func-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c3_bus: hsi2c3-bus-pins { + samsung,pins = "gpp6-0", "gpp6-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart3_bus_single: uart3-bus-pins { + samsung,pins = "gpp6-0", "gpp6-1", + "gpp6-2", "gpp6-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + + spi3_bus: spi3-bus-pins { + samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi3_cs: spi3-cs-pins { + samsung,pins = "gpp6-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi3_cs_func: spi3-cs-func-pins { + samsung,pins = "gpp6-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c2_bus: hsi2c2-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart2_bus_single: uart2-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1", + "gpp4-2", "gpp4-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + + spi2_bus: spi2-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi2_cs: spi2-cs-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi2_cs_func: spi2-cs-func-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c1_bus: hsi2c1-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart1_bus_single: uart1-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1", + "gpp2-2", "gpp2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + + spi1_bus: spi1-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi1_cs: spi1-cs-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi1_cs_func: spi1-cs-func-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; + +/* GPIO_PERIC1 */ +&pinctrl_5 { + gpp20: gpp20-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp21: gpp21-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp22: gpp22-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp23: gpp23-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp24: gpp24-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp25: gpp25-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp26: gpp26-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp27: gpp27-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + hsi2c13_bus: hsi2c13-bus-pins { + samsung,pins = "gpp25-0", "gpp25-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart13_bus_single: uart13-bus-pins { + samsung,pins = "gpp25-0", "gpp25-1", + "gpp25-2", "gpp25-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + spi13_bus: spi13-bus-pins { + samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi13_cs: spi13-cs-pins { + samsung,pins = "gpp25-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi13_cs_func: spi13-cs-func-pins { + samsung,pins = "gpp25-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c12_bus: hsi2c12-bus-pins { + samsung,pins = "gpp23-4", "gpp23-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart12_bus_single: uart12-bus-pins { + samsung,pins = "gpp23-4", "gpp23-5", + "gpp23-6", "gpp23-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + spi12_bus: spi12-bus-pins { + samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi14_cs2: spi14-cs2-pins { + samsung,pins = "gpp23-6"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi12_cs: spi12-cs-pins { + samsung,pins = "gpp23-7"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi12_cs_func: spi12-cs-func-pins { + samsung,pins = "gpp23-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c11_bus: hsi2c11-bus-pins { + samsung,pins = "gpp23-0", "gpp23-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart11_bus_single: uart11-bus-pins { + samsung,pins = "gpp23-0", "gpp23-1", + "gpp23-2", "gpp23-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + spi11_bus: spi11-bus-pins { + samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi11_cs: spi11-cs-pins { + samsung,pins = "gpp23-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi11_cs_func: spi11-cs-func-pins { + samsung,pins = "gpp23-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c10_bus: hsi2c10-bus-pins { + samsung,pins = "gpp21-0", "gpp21-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart10_bus_single: uart10-bus-pins { + samsung,pins = "gpp21-0", "gpp21-1", + "gpp21-2", "gpp21-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + spi10_bus: spi10-bus-pins { + samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi10_cs: spi10-cs-pins { + samsung,pins = "gpp21-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi10_cs_func: spi10-cs-func-pins { + samsung,pins = "gpp21-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c9_bus: hsi2c9-bus-pins { + samsung,pins = "gpp20-4", "gpp20-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart9_bus_single: uart9-bus-pins { + samsung,pins = "gpp20-4", "gpp20-5", + "gpp20-6", "gpp20-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + spi9_bus: spi9-bus-pins { + samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi9_cs: spi9-cs-pins { + samsung,pins = "gpp20-7"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi9_cs_func: spi9-cs-func-pins { + samsung,pins = "gpp20-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c0_bus: hsi2c0-bus-pins { + samsung,pins = "gpp20-0", "gpp20-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart0_bus_single: uart0-bus-pins { + samsung,pins = "gpp20-0", "gpp20-1", + "gpp20-2", "gpp20-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + }; + + spi0_bus: spi0-bus-pins { + samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi0_cs: spi0-cs-pins { + samsung,pins = "gpp20-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi0_cs_func: spi0-cs-func-pins { + samsung,pins = "gpp20-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; + diff --git a/arch/arm64/boot/dts/google/gs101-pinctrl.h b/arch/arm64/boot/dts/google/gs101-pinctrl.h new file mode 100644 index 000000000000..16c54888f4bb --- /dev/null +++ b/arch/arm64/boot/dts/google/gs101-pinctrl.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Pinctrl binding constants for GS101 + * + * Copyright (c) 2020-2023 Google, LLC. + */ + +#ifndef __DT_BINDINGS_PINCTRL_GS101_H__ +#define __DT_BINDINGS_PINCTRL_GS101_H__ + +#define GS101_PIN_PULL_NONE 0 +#define GS101_PIN_PULL_DOWN 1 +#define GS101_PIN_PULL_UP 3 + +/* Pin function in power down mode */ +#define GS101_PIN_PDN_OUT0 0 +#define GS101_PIN_PDN_OUT1 1 +#define GS101_PIN_PDN_INPUT 2 +#define GS101_PIN_PDN_PREV 3 + +/* GS101 drive strengths */ +#define GS101_PIN_DRV_2_5_MA 0 +#define GS101_PIN_DRV_5_MA 1 +#define GS101_PIN_DRV_7_5_MA 2 +#define GS101_PIN_DRV_10_MA 3 + +#define GS101_PIN_FUNC_INPUT 0 +#define GS101_PIN_FUNC_OUTPUT 1 +#define GS101_PIN_FUNC_2 2 +#define GS101_PIN_FUNC_3 3 + +#endif /* __DT_BINDINGS_PINCTRL_GS101_H__ */ diff --git a/arch/arm64/boot/dts/google/gs101.dtsi b/arch/arm64/boot/dts/google/gs101.dtsi new file mode 100644 index 000000000000..37fb0a4dc8d3 --- /dev/null +++ b/arch/arm64/boot/dts/google/gs101.dtsi @@ -0,0 +1,504 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GS101 SoC + * + * Copyright 2019-2023 Google LLC + * + */ + +#include <dt-bindings/clock/google,gs101.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "google,gs101"; + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + pinctrl4 = &pinctrl_4; + pinctrl5 = &pinctrl_5; + pinctrl6 = &pinctrl_6; + pinctrl7 = &pinctrl_7; + serial0 = &serial_0; + }; + + arm-pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + dsu-pmu-0 { + compatible = "arm,dsu-pmu"; + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + + /* TODO replace with CCF clock */ + dummy_clk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12345>; + clock-output-names = "pclk"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpu6>; + }; + core1 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0000>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0100>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0200>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0300>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0400>; + enable-method = "psci"; + cpu-idle-states = <&ENYO_CPU_SLEEP>; + capacity-dmips-mhz = <620>; + dynamic-power-coefficient = <284>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0500>; + enable-method = "psci"; + cpu-idle-states = <&ENYO_CPU_SLEEP>; + capacity-dmips-mhz = <620>; + dynamic-power-coefficient = <284>; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0600>; + enable-method = "psci"; + cpu-idle-states = <&HERA_CPU_SLEEP>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <650>; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0700>; + enable-method = "psci"; + cpu-idle-states = <&HERA_CPU_SLEEP>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <650>; + }; + + idle-states { + entry-method = "psci"; + + ANANKE_CPU_SLEEP: cpu-ananke-sleep { + idle-state-name = "c2"; + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <70>; + exit-latency-us = <160>; + min-residency-us = <2000>; + }; + + ENYO_CPU_SLEEP: cpu-enyo-sleep { + idle-state-name = "c2"; + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <150>; + exit-latency-us = <190>; + min-residency-us = <2500>; + }; + + HERA_CPU_SLEEP: cpu-hera-sleep { + idle-state-name = "c2"; + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <235>; + exit-latency-us = <220>; + min-residency-us = <3500>; + }; + }; + }; + + /* bootloader requires ect node */ + ect { + parameter_address = <0x90000000>; + parameter_size = <0x53000>; + }; + + ext_24_5m: clock-1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + clock-output-names = "oscclk"; + }; + + ext_200m: clock-2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "ext-200m"; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + gsa_reserved_protected: gsa@90200000 { + reg = <0x0 0x90200000 0x400000>; + no-map; + }; + + tpu_fw_reserved: tpu-fw@93000000 { + reg = <0x0 0x93000000 0x1000000>; + no-map; + }; + + aoc_reserve: aoc@94000000 { + reg = <0x0 0x94000000 0x03000000>; + no-map; + }; + + abl_reserved: abl@f8800000 { + reg = <0x0 0xf8800000 0x02000000>; + no-map; + }; + + dss_log_reserved: dss-log-reserved@fd3f0000 { + reg = <0 0xfd3f0000 0x0000e000>; + no-map; + }; + + debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 { + reg = <0 0xfd3fe000 0x00001000>; + no-map; + }; + + bldr_log_reserved: bldr-log-reserved@fd800000 { + reg = <0 0xfd800000 0x00100000>; + no-map; + }; + + bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 { + reg = <0 0xfd900000 0x00002000>; + no-map; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24576000>; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + + cmu_misc: clock-controller@10010000 { + compatible = "google,gs101-cmu-misc"; + reg = <0x0 0x10010000 0x8000>; + #clock-cells = <1>; + clocks = <&ext_24_5m>, <&cmu_top CLK_DOUT_MISC_BUS>; + clock-names = "oscclk", "dout_cmu_misc_bus"; + }; + + watchdog_cl0: watchdog@10060000 { + compatible = "google,gs101-wdt"; + reg = <0x0 0x10060000 0x100>; + interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0>, <&ext_24_5m>; + clock-names = "watchdog", "watchdog_src"; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,cluster-index = <0>; + }; + + watchdog_cl1: watchdog@10070000 { + compatible = "google,gs101-wdt"; + reg = <0x0 0x10070000 0x100>; + interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1>, <&ext_24_5m>; + clock-names = "watchdog", "watchdog_src"; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,cluster-index = <1>; + status = "disabled"; + }; + + gic: interrupt-controller@10400000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x10400000 0x10000>, /* GICD */ + <0x0 0x10440000 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + sysreg_peric0: syscon@10821000 { + compatible = "google,gs101-peric0-sysreg", "syscon"; + reg = <0x0 0x10821000 0x40000>; + }; + + /* GPIO_PERIC0 */ + pinctrl_4: pinctrl@10840000 { + compatible = "google,gs101-pinctrl"; + reg = <0x0 0x10840000 0x00001000>; + interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH>; + }; + + serial_0: serial@10a00000 { + compatible = "google,gs101-uart"; + reg = <0x0 0x10a00000 0xc0>; + reg-io-width = <4>; + samsung,uart-fifosize = <256>; + interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dummy_clk 0>, <&dummy_clk 0>; + clock-names = "uart", "clk_uart_baud0"; + }; + + /* GPIO_PERIC1 */ + pinctrl_5: pinctrl@10c40000 { + compatible = "google,gs101-pinctrl"; + reg = <0x0 0x10C40000 0x00001000>; + interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>; + }; + + sysreg_peric1: syscon@10c21000 { + compatible = "google,gs101-peric1-sysreg", "syscon"; + reg = <0x0 0x10C21000 0x40000>; + }; + + /* GPIO_HSI1 */ + pinctrl_6: pinctrl@11840000 { + compatible = "google,gs101-pinctrl"; + reg = <0x0 0x11840000 0x00001000>; + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* GPIO_HSI2 */ + pinctrl_7: pinctrl@14440000 { + compatible = "google,gs101-pinctrl"; + reg = <0x0 0x14440000 0x00001000>; + interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>; + }; + + cmu_apm: clock-controller@17400000 { + compatible = "google,gs101-cmu-apm"; + reg = <0x0 0x17400000 0x8000>; + #clock-cells = <1>; + + clocks = <&ext_24_5m>; + clock-names = "oscclk"; + }; + + sysreg_apm: syscon@174204e0 { + compatible = "google,gs101-apm-sysreg", "syscon"; + reg = <0x0 0x174204e0 0x1000>; + }; + + pmu_system_controller: system-controller@17460000 { + compatible = "google,gs101-pmu", "syscon"; + reg = <0x0 0x17460000 0x10000>; + }; + + /* GPIO_ALIVE */ + pinctrl_0: pinctrl@174d0000 { + compatible = "google,gs101-pinctrl"; + reg = <0x0 0x174d0000 0x00001000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + + wakeup-interrupt-controller { + compatible = "google,gs101-wakeup-eint"; + }; + }; + + /* GPIO_FAR_ALIVE */ + pinctrl_1: pinctrl@174e0000 { + compatible = "google,gs101-pinctrl"; + reg = <0x0 0x174e0000 0x00001000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + + wakeup-interrupt-controller { + compatible = "google,gs101-wakeup-eint"; + }; + }; + + /* GPIO_GSACTRL */ + pinctrl_3: pinctrl@17940000 { + compatible = "google,gs101-pinctrl"; + reg = <0x0 0x17940000 0x00001000>; + }; + + /* GPIO_GSACORE */ + pinctrl_2: pinctrl@17a80000 { + compatible = "google,gs101-pinctrl"; + reg = <0x0 0x17a80000 0x00001000>; + }; + + cmu_top: clock-controller@1e080000 { + compatible = "google,gs101-cmu-top"; + reg = <0x0 0x1e080000 0x8000>; + #clock-cells = <1>; + + clocks = <&ext_24_5m>; + clock-names = "oscclk"; + }; + }; +}; + +#include "gs101-pinctrl.dtsi"
Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6, (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile phones. It features: * 4xA55 little cluster * 2xA76 Mid cluster * 2xX1 Big cluster This commit adds the basic device tree for gs101 (SoC). Further platform support will be added over time. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- arch/arm64/Kconfig.platforms | 6 + arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/google/gs101-pinctrl.dtsi | 1275 +++++++++++++++++ arch/arm64/boot/dts/google/gs101-pinctrl.h | 32 + arch/arm64/boot/dts/google/gs101.dtsi | 504 +++++++ 5 files changed, 1818 insertions(+) create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.dtsi create mode 100644 arch/arm64/boot/dts/google/gs101-pinctrl.h create mode 100644 arch/arm64/boot/dts/google/gs101.dtsi