@@ -384,22 +384,10 @@ static char *designware_pcie_viewport_name(const char *direction,
static void designware_pcie_root_realize(PCIDevice *dev, Error **errp)
{
DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(dev);
- DesignwarePCIEHost *host = DESIGNWARE_PCIE_HOST(
- qdev_get_parent_bus(DEVICE(dev))->parent);
- MemoryRegion *host_mem = get_system_memory();
- MemoryRegion *address_space = &host->pci.memory;
PCIBridge *br = PCI_BRIDGE(dev);
- DesignwarePCIEViewport *viewport;
- /*
- * Dummy values used for initial configuration of MemoryRegions
- * that belong to a given viewport
- */
- const hwaddr dummy_offset = 0;
- const uint64_t dummy_size = 4;
- size_t i;
br->bus_name = "dw-pcie";
- root->host = host;
+ root->host = DESIGNWARE_PCIE_HOST(qdev_get_parent_bus(DEVICE(dev))->parent);
pci_set_word(dev->config + PCI_COMMAND,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
@@ -414,97 +402,6 @@ static void designware_pcie_root_realize(PCIDevice *dev, Error **errp)
msi_nonbroken = true;
msi_init(dev, 0x50, 32, true, true, &error_fatal);
-
- for (i = 0; i < DESIGNWARE_PCIE_NUM_VIEWPORTS; i++) {
- MemoryRegion *source, *destination, *mem;
- const char *direction;
- char *name;
-
- viewport = &host->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][i];
- viewport->inbound = true;
- viewport->base = 0x0000000000000000ULL;
- viewport->target = 0x0000000000000000ULL;
- viewport->limit = UINT32_MAX;
- viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM;
-
- source = &host->pci.address_space_root;
- destination = host_mem;
- direction = "Inbound";
-
- /*
- * Configure MemoryRegion implementing PCI -> CPU memory
- * access
- */
- mem = &viewport->mem;
- name = designware_pcie_viewport_name(direction, i, "MEM");
- memory_region_init_alias(mem, OBJECT(root), name, destination,
- dummy_offset, dummy_size);
- memory_region_add_subregion_overlap(source, dummy_offset, mem, -1);
- memory_region_set_enabled(mem, false);
- g_free(name);
-
- viewport = &host->viewports[DESIGNWARE_PCIE_VIEWPORT_OUTBOUND][i];
- viewport->host = host;
- viewport->inbound = false;
- viewport->base = 0x0000000000000000ULL;
- viewport->target = 0x0000000000000000ULL;
- viewport->limit = UINT32_MAX;
- viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM;
-
- destination = &host->pci.memory;
- direction = "Outbound";
- source = host_mem;
-
- /*
- * Configure MemoryRegion implementing CPU -> PCI memory
- * access
- */
- mem = &viewport->mem;
- name = designware_pcie_viewport_name(direction, i, "MEM");
- memory_region_init_alias(mem, OBJECT(root), name, destination,
- dummy_offset, dummy_size);
- memory_region_add_subregion(source, dummy_offset, mem);
- memory_region_set_enabled(mem, false);
- g_free(name);
-
- /*
- * Configure MemoryRegion implementing access to configuration
- * space
- */
- mem = &viewport->cfg;
- name = designware_pcie_viewport_name(direction, i, "CFG");
- memory_region_init_io(&viewport->cfg, OBJECT(root),
- &designware_pci_host_conf_ops,
- viewport, name, dummy_size);
- memory_region_add_subregion(source, dummy_offset, mem);
- memory_region_set_enabled(mem, false);
- g_free(name);
- }
-
- /*
- * If no inbound iATU windows are configured, HW defaults to
- * letting inbound TLPs to pass in. We emulate that by explicitly
- * configuring first inbound window to cover all of target's
- * address space.
- *
- * NOTE: This will not work correctly for the case when first
- * configured inbound window is window 0
- */
- viewport = &host->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][0];
- viewport->cr[1] = DESIGNWARE_PCIE_ATU_ENABLE;
- designware_pcie_update_viewport(root, viewport);
-
- memory_region_init_io(&host->msi.iomem, OBJECT(root),
- &designware_pci_host_msi_ops,
- root, "pcie-msi", 0x4);
- /*
- * We initially place MSI interrupt I/O region at address 0 and
- * disable it. It'll be later moved to correct offset and enabled
- * in designware_pcie_root_update_msi_mapping() as a part of
- * initialization done by guest OS
- */
- memory_region_add_subregion(address_space, dummy_offset, &host->msi.iomem);
- memory_region_set_enabled(&host->msi.iomem, false);
}
static void designware_pcie_set_irq(void *opaque, int irq_num, int level)
@@ -590,7 +487,7 @@ static void designware_pcie_root_class_init(ObjectClass *klass, void *data)
dc->reset = pci_bridge_reset;
/*
* PCI-facing part of the host bridge, not usable without the
- * host-facing part, which can't be device_add'ed, yet.
+ * host-facing part.
*/
dc->user_creatable = false;
dc->vmsd = &vmstate_designware_pcie_root;
@@ -650,8 +547,17 @@ static void designware_pcie_host_realize(DeviceState *dev, Error **errp)
PCIHostState *pci = PCI_HOST_BRIDGE(dev);
DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+ MemoryRegion *host_mem = get_system_memory();
+ DesignwarePCIEViewport *viewport;
size_t i;
+ /*
+ * Dummy values used for initial configuration of MemoryRegions
+ * that belong to a given viewport
+ */
+ const hwaddr dummy_offset = 0;
+ const uint64_t dummy_size = 4;
+
for (i = 0; i < ARRAY_SIZE(s->pci.irqs); i++) {
sysbus_init_irq(sbd, &s->pci.irqs[i]);
}
@@ -694,6 +600,97 @@ static void designware_pcie_host_realize(DeviceState *dev, Error **errp)
qdev_prop_set_int32(DEVICE(&s->root), "addr", PCI_DEVFN(0, 0));
qdev_prop_set_bit(DEVICE(&s->root), "multifunction", false);
qdev_realize(DEVICE(&s->root), BUS(pci->bus), &error_fatal);
+
+ memory_region_init_io(&s->msi.iomem, OBJECT(s),
+ &designware_pci_host_msi_ops,
+ s, "pcie-msi", 0x4);
+ /*
+ * We initially place MSI interrupt I/O region at address 0 and
+ * disable it. It'll be later moved to correct offset and enabled
+ * in designware_pcie_host_update_msi_mapping() as a part of
+ * initialization done by guest OS
+ */
+ memory_region_add_subregion(&s->pci.memory, dummy_offset, &s->msi.iomem);
+ memory_region_set_enabled(&s->msi.iomem, false);
+
+ for (i = 0; i < DESIGNWARE_PCIE_NUM_VIEWPORTS; i++) {
+ MemoryRegion *source, *destination, *mem;
+ const char *direction;
+ char *name;
+
+ viewport = &s->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][i];
+ viewport->inbound = true;
+ viewport->base = 0x0000000000000000ULL;
+ viewport->target = 0x0000000000000000ULL;
+ viewport->limit = UINT32_MAX;
+ viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM;
+
+ source = &s->pci.address_space_root;
+ destination = host_mem;
+ direction = "Inbound";
+
+ /*
+ * Configure MemoryRegion implementing PCI -> CPU memory
+ * access
+ */
+ mem = &viewport->mem;
+ name = designware_pcie_viewport_name(direction, i, "MEM");
+ memory_region_init_alias(mem, OBJECT(s), name, destination,
+ dummy_offset, dummy_size);
+ memory_region_add_subregion_overlap(source, dummy_offset, mem, -1);
+ memory_region_set_enabled(mem, false);
+ g_free(name);
+
+ viewport = &s->viewports[DESIGNWARE_PCIE_VIEWPORT_OUTBOUND][i];
+ viewport->host = s;
+ viewport->inbound = false;
+ viewport->base = 0x0000000000000000ULL;
+ viewport->target = 0x0000000000000000ULL;
+ viewport->limit = UINT32_MAX;
+ viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM;
+
+ destination = &s->pci.memory;
+ direction = "Outbound";
+ source = host_mem;
+
+ /*
+ * Configure MemoryRegion implementing CPU -> PCI memory
+ * access
+ */
+ mem = &viewport->mem;
+ name = designware_pcie_viewport_name(direction, i, "MEM");
+ memory_region_init_alias(mem, OBJECT(s), name, destination,
+ dummy_offset, dummy_size);
+ memory_region_add_subregion(source, dummy_offset, mem);
+ memory_region_set_enabled(mem, false);
+ g_free(name);
+
+ /*
+ * Configure MemoryRegion implementing access to configuration
+ * space
+ */
+ mem = &viewport->cfg;
+ name = designware_pcie_viewport_name(direction, i, "CFG");
+ memory_region_init_io(&viewport->cfg, OBJECT(s),
+ &designware_pci_host_conf_ops,
+ viewport, name, dummy_size);
+ memory_region_add_subregion(source, dummy_offset, mem);
+ memory_region_set_enabled(mem, false);
+ g_free(name);
+ }
+
+ /*
+ * If no inbound iATU windows are configured, HW defaults to
+ * letting inbound TLPs to pass in. We emulate that by explicitly
+ * configuring first inbound window to cover all of target's
+ * address space.
+ *
+ * NOTE: This will not work correctly for the case when first
+ * configured inbound window is window 0
+ */
+ viewport = &s->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][0];
+ viewport->cr[1] = DESIGNWARE_PCIE_ATU_ENABLE;
+ designware_pcie_update_viewport(&s->root, viewport);
}
static const VMStateDescription vmstate_designware_pcie_host = {
ViewPorts are managed by the host bridge part, so create them when the host bridge is realized. The host bridge become the owner of the memory regions. The PCI root function realize() method now only contains PCI specific code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/pci-host/designware.c | 207 +++++++++++++++++++-------------------- 1 file changed, 102 insertions(+), 105 deletions(-)