diff mbox series

[2/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7250B thermals

Message ID 20231013-fp5-thermals-v1-2-f14df01922e6@fairphone.com
State Accepted
Commit 4c343fe9b68adeca1aa3a851bd06e62ecdaed180
Headers show
Series [1/4] iio: adc: Add PM7325 PMIC7 ADC bindings | expand

Commit Message

Luca Weiss Oct. 13, 2023, 8:09 a.m. UTC
Configure the thermals for the CHARGER_SKIN_THERM and USB_CONN_THERM
thermistors connected to PM7250B.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 66 ++++++++++++++++++++++
 1 file changed, 66 insertions(+)

Comments

Konrad Dybcio Oct. 13, 2023, 11:11 p.m. UTC | #1
On 13.10.2023 10:09, Luca Weiss wrote:
> Configure the thermals for the CHARGER_SKIN_THERM and USB_CONN_THERM
> thermistors connected to PM7250B.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>  arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 66 ++++++++++++++++++++++
>  1 file changed, 66 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> index 2de0b8c26c35..7fe19b556e6a 100644
> --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> @@ -134,6 +134,36 @@ afvdd_2p8: regulator-afvdd-2p8 {
>  		enable-active-high;
>  		vin-supply = <&vreg_bob>;
>  	};
> +
> +	thermal-zones {
> +		chg-skin-thermal {
skin

> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&pm7250b_adc_tm 0>;
> +
> +			trips {
> +				active-config0 {
> +					temperature = <125000>;
125

hmm..

Konrad
Konrad Dybcio Oct. 18, 2023, 8:30 p.m. UTC | #2
On 10/13/23 10:09, Luca Weiss wrote:
> Configure the thermals for the CHARGER_SKIN_THERM and USB_CONN_THERM
> thermistors connected to PM7250B.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>   arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 66 ++++++++++++++++++++++
>   1 file changed, 66 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> index 2de0b8c26c35..7fe19b556e6a 100644
> --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> @@ -134,6 +134,36 @@ afvdd_2p8: regulator-afvdd-2p8 {
>   		enable-active-high;
>   		vin-supply = <&vreg_bob>;
>   	};
> +
> +	thermal-zones {
> +		chg-skin-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&pm7250b_adc_tm 0>;
> +
> +			trips {
> +				active-config0 {
> +					temperature = <125000>;
I guess looking at skin-temp-thermal in x13s dts for starters
is a good idea.. we should probably then adjust it to something
more pocketable..

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index 2de0b8c26c35..7fe19b556e6a 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -134,6 +134,36 @@  afvdd_2p8: regulator-afvdd-2p8 {
 		enable-active-high;
 		vin-supply = <&vreg_bob>;
 	};
+
+	thermal-zones {
+		chg-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -425,6 +455,42 @@  &ipa {
 	status = "okay";
 };
 
+&pm7250b_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "charger_skin_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "conn_therm";
+	};
+};
+
+&pm7250b_adc_tm {
+	status = "okay";
+
+	charger-skin-therm@0 {
+		reg = <0>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	conn-therm@1 {
+		reg = <1>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
 &pm7325_gpios {
 	volume_down_default: volume-down-default-state {
 		pins = "gpio6";