diff mbox series

[4/4] platform/x86: x86-android-tablets: Add audio codec info for Lenovo Yoga Tab 3 Pro YT3-X90F

Message ID 20231014205314.59333-5-hdegoede@redhat.com
State Superseded
Headers show
Series spi/ACPI: Add support for SPI WM5102 coded on Lenovo YT3-X90 | expand

Commit Message

Hans de Goede Oct. 14, 2023, 8:53 p.m. UTC
The SPI attached WM5102 codec on the Lenovo Yoga Tab 3 Pro YT3-X90F
is not described in the ACPI tables.

Add info to instantiate the SPI device for the codec manually.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 .../platform/x86/x86-android-tablets/lenovo.c | 99 +++++++++++++++++++
 1 file changed, 99 insertions(+)

Comments

Hans de Goede Oct. 15, 2023, 9:15 a.m. UTC | #1
Hi,

On 10/14/23 22:53, Hans de Goede wrote:
> The SPI attached WM5102 codec on the Lenovo Yoga Tab 3 Pro YT3-X90F
> is not described in the ACPI tables.
> 
> Add info to instantiate the SPI device for the codec manually.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  .../platform/x86/x86-android-tablets/lenovo.c | 99 +++++++++++++++++++
>  1 file changed, 99 insertions(+)
> 
> diff --git a/drivers/platform/x86/x86-android-tablets/lenovo.c b/drivers/platform/x86/x86-android-tablets/lenovo.c
> index 585f10a57810..d5d815940ce1 100644
> --- a/drivers/platform/x86/x86-android-tablets/lenovo.c
> +++ b/drivers/platform/x86/x86-android-tablets/lenovo.c
> @@ -12,6 +12,8 @@
>  
>  #include <linux/efi.h>
>  #include <linux/gpio/machine.h>
> +#include <linux/mfd/arizona/pdata.h>
> +#include <linux/mfd/arizona/registers.h>
>  #include <linux/mfd/intel_soc_pmic.h>
>  #include <linux/pinctrl/consumer.h>
>  #include <linux/pinctrl/machine.h>
> @@ -677,6 +679,89 @@ static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = {
>  	}
>  };
>  
> +/*
> + * The AOSP 3.5 mm Headset: Accessory Specification gives the following values:
> + * Function A Play/Pause:           0 ohm
> + * Function D Voice assistant:    135 ohm
> + * Function B Volume Up           240 ohm
> + * Function C Volume Down         470 ohm
> + * Minimum Mic DC resistance     1000 ohm
> + * Minimum Ear speaker impedance   16 ohm
> + * Note the first max value below must be less then the min. speaker impedance,
> + * to allow CTIA/OMTP detection to work. The other max values are the closest
> + * value from extcon-arizona.c:arizona_micd_levels halfway 2 button resistances.
> + */
> +static const struct arizona_micd_range arizona_micd_aosp_ranges[] = {
> +	{ .max =  11, .key = KEY_PLAYPAUSE },
> +	{ .max = 186, .key = KEY_VOICECOMMAND },
> +	{ .max = 348, .key = KEY_VOLUMEUP },
> +	{ .max = 752, .key = KEY_VOLUMEDOWN },
> +};
> +
> +/* YT3 WM5102 arizona_micd_config comes from Android kernel sources */
> +static struct arizona_micd_config lenovo_yt3_wm5102_micd_config[]={
> +	{ 0, 1, 0 },
> +	{ ARIZONA_ACCDET_SRC, 2, 1 },
> +};
> +
> +static struct arizona_pdata lenovo_yt3_wm5102_pdata = {
> +	.irq_flags = IRQF_TRIGGER_LOW,
> +	.micd_detect_debounce = 200,
> +	.micd_ranges = arizona_micd_aosp_ranges,
> +	.num_micd_ranges = ARRAY_SIZE(arizona_micd_aosp_ranges),
> +	.hpdet_channel = ARIZONA_ACCDET_MODE_HPL,
> +
> +	/* Below settings come from Android kernel sources */
> +	.micd_bias_start_time = 1,
> +	.micd_rate = 6,
> +	.micd_force_micbias = 1,
> +	.micd_configs = lenovo_yt3_wm5102_micd_config,
> +	.num_micd_configs = ARRAY_SIZE(lenovo_yt3_wm5102_micd_config),
> +        .micbias={
> +           [0]={ /*MICBIAS1*/
> +                 .mV =2800 ,
> +                 .ext_cap=1,
> +                 .discharge =1 ,
> +                 .soft_start =0,
> +                 .bypass =0,
> +           },

Note I messed up the indentation here (spaces instead of tabs)
when copy pasting this from one terminal to another,
I'll go and fix this up locally.

Regards,

Hans




> +           [1]={ /*MICBIAS2*/
> +                 .mV =2800 ,
> +                 .ext_cap=1,
> +                 .discharge =1 ,
> +                 .soft_start =0,
> +                 .bypass =0,
> +           },
> +           [2]={ /*MICBIAS3*/
> +                 .mV =2800 ,
> +                 .ext_cap=1,
> +                 .discharge =1 ,
> +                 .soft_start =0,
> +                 .bypass =0,
> +           },
> +        },
> +};
> +
> +static const struct x86_spi_dev_info lenovo_yt3_spi_devs[] __initconst = {
> +	{
> +		/* WM5102 codec */
> +		.board_info = {
> +			.modalias = "wm5102",
> +			.platform_data = &lenovo_yt3_wm5102_pdata,
> +			.max_speed_hz = 5000000,
> +		},
> +		.ctrl_path = "\\_SB_.PCI0.SPI1",
> +		.irq_data = {
> +			.type = X86_ACPI_IRQ_TYPE_GPIOINT,
> +			.chip = "INT33FF:00",
> +			.index = 91,
> +			.trigger = ACPI_LEVEL_SENSITIVE,
> +			.polarity = ACPI_ACTIVE_LOW,
> +			.con_id = "wm5102_irq",
> +		},
> +	}
> +};
> +
>  static int __init lenovo_yt3_init(void)
>  {
>  	int ret;
> @@ -720,14 +805,28 @@ static struct gpiod_lookup_table lenovo_yt3_hideep_gpios = {
>  	},
>  };
>  
> +static struct gpiod_lookup_table lenovo_yt3_wm5102_gpios = {
> +	.dev_id = "spi1.0",
> +	.table = {
> +		GPIO_LOOKUP("INT33FF:00", 75, "wlf,spkvdd-ena", GPIO_ACTIVE_HIGH),
> +		GPIO_LOOKUP("INT33FF:00", 81, "wlf,ldoena", GPIO_ACTIVE_HIGH),
> +		GPIO_LOOKUP("INT33FF:00", 82, "reset", GPIO_ACTIVE_HIGH),
> +		GPIO_LOOKUP("arizona", 2, "wlf,micd-pol", GPIO_ACTIVE_HIGH),
> +		{ }
> +	},
> +};
> +
>  static struct gpiod_lookup_table * const lenovo_yt3_gpios[] = {
>  	&lenovo_yt3_hideep_gpios,
> +	&lenovo_yt3_wm5102_gpios,
>  	NULL
>  };
>  
>  const struct x86_dev_info lenovo_yt3_info __initconst = {
>  	.i2c_client_info = lenovo_yt3_i2c_clients,
>  	.i2c_client_count = ARRAY_SIZE(lenovo_yt3_i2c_clients),
> +	.spi_dev_info = lenovo_yt3_spi_devs,
> +	.spi_dev_count = ARRAY_SIZE(lenovo_yt3_spi_devs),
>  	.gpiod_lookup_tables = lenovo_yt3_gpios,
>  	.init = lenovo_yt3_init,
>  };
Andy Shevchenko Oct. 16, 2023, 8:13 a.m. UTC | #2
On Sun, Oct 15, 2023 at 11:15:47AM +0200, Hans de Goede wrote:
> On 10/14/23 22:53, Hans de Goede wrote:

> > +        .micbias={
> > +           [0]={ /*MICBIAS1*/

Talking about spaces, how about

        .micbias = {
           [0] = { / *MICBIAS1 */
                 .mV = 2800 ,
                 .ext_cap = 1,
                 .discharge = 1 ,
                 .soft_start = 0,
                 .bypass = 0,

> > +                 .mV =2800 ,
> > +                 .ext_cap=1,
> > +                 .discharge =1 ,
> > +                 .soft_start =0,
> > +                 .bypass =0,
> > +           },
> 
> Note I messed up the indentation here (spaces instead of tabs)
> when copy pasting this from one terminal to another,
> I'll go and fix this up locally.
Hans de Goede Oct. 16, 2023, 8:58 a.m. UTC | #3
Hi,

On 10/16/23 10:13, Andy Shevchenko wrote:
> On Sun, Oct 15, 2023 at 11:15:47AM +0200, Hans de Goede wrote:
>> On 10/14/23 22:53, Hans de Goede wrote:
> 
>>> +        .micbias={
>>> +           [0]={ /*MICBIAS1*/
> 
> Talking about spaces, how about
> 
>         .micbias = {
>            [0] = { / *MICBIAS1 */
>                  .mV = 2800 ,
>                  .ext_cap = 1,
>                  .discharge = 1 ,
>                  .soft_start = 0,
>                  .bypass = 0,

Ack, I already have it like this locally now. Also using only
tabs, there is plenty of width to just indent the "[0] = { ..."
with a tab too.

Regards,

Hans
Mark Brown Oct. 16, 2023, 2:47 p.m. UTC | #4
On Sat, Oct 14, 2023 at 10:53:14PM +0200, Hans de Goede wrote:

> +	.micd_force_micbias = 1,
> +	.micd_configs = lenovo_yt3_wm5102_micd_config,
> +	.num_micd_configs = ARRAY_SIZE(lenovo_yt3_wm5102_micd_config),
> +        .micbias={
> +           [0]={ /*MICBIAS1*/
> +                 .mV =2800 ,
> +                 .ext_cap=1,

The indentation of this section seems weird - .micbias is indented and
the lack of spaces around =s is odd.  There's also an extra space before
the , consistently on the mV lines.
Hans de Goede Oct. 16, 2023, 3:34 p.m. UTC | #5
Hi,

On 10/16/23 16:47, Mark Brown wrote:
> On Sat, Oct 14, 2023 at 10:53:14PM +0200, Hans de Goede wrote:
> 
>> +	.micd_force_micbias = 1,
>> +	.micd_configs = lenovo_yt3_wm5102_micd_config,
>> +	.num_micd_configs = ARRAY_SIZE(lenovo_yt3_wm5102_micd_config),
>> +        .micbias={
>> +           [0]={ /*MICBIAS1*/
>> +                 .mV =2800 ,
>> +                 .ext_cap=1,
> 
> The indentation of this section seems weird - .micbias is indented and
> the lack of spaces around =s is odd.  There's also an extra space before
> the , consistently on the mV lines.

Right this is a copy and paste fail on my side, I've fixed this up
locally already, so this will be fixed in the next version.

Regards,

Hans
diff mbox series

Patch

diff --git a/drivers/platform/x86/x86-android-tablets/lenovo.c b/drivers/platform/x86/x86-android-tablets/lenovo.c
index 585f10a57810..d5d815940ce1 100644
--- a/drivers/platform/x86/x86-android-tablets/lenovo.c
+++ b/drivers/platform/x86/x86-android-tablets/lenovo.c
@@ -12,6 +12,8 @@ 
 
 #include <linux/efi.h>
 #include <linux/gpio/machine.h>
+#include <linux/mfd/arizona/pdata.h>
+#include <linux/mfd/arizona/registers.h>
 #include <linux/mfd/intel_soc_pmic.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/machine.h>
@@ -677,6 +679,89 @@  static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = {
 	}
 };
 
+/*
+ * The AOSP 3.5 mm Headset: Accessory Specification gives the following values:
+ * Function A Play/Pause:           0 ohm
+ * Function D Voice assistant:    135 ohm
+ * Function B Volume Up           240 ohm
+ * Function C Volume Down         470 ohm
+ * Minimum Mic DC resistance     1000 ohm
+ * Minimum Ear speaker impedance   16 ohm
+ * Note the first max value below must be less then the min. speaker impedance,
+ * to allow CTIA/OMTP detection to work. The other max values are the closest
+ * value from extcon-arizona.c:arizona_micd_levels halfway 2 button resistances.
+ */
+static const struct arizona_micd_range arizona_micd_aosp_ranges[] = {
+	{ .max =  11, .key = KEY_PLAYPAUSE },
+	{ .max = 186, .key = KEY_VOICECOMMAND },
+	{ .max = 348, .key = KEY_VOLUMEUP },
+	{ .max = 752, .key = KEY_VOLUMEDOWN },
+};
+
+/* YT3 WM5102 arizona_micd_config comes from Android kernel sources */
+static struct arizona_micd_config lenovo_yt3_wm5102_micd_config[]={
+	{ 0, 1, 0 },
+	{ ARIZONA_ACCDET_SRC, 2, 1 },
+};
+
+static struct arizona_pdata lenovo_yt3_wm5102_pdata = {
+	.irq_flags = IRQF_TRIGGER_LOW,
+	.micd_detect_debounce = 200,
+	.micd_ranges = arizona_micd_aosp_ranges,
+	.num_micd_ranges = ARRAY_SIZE(arizona_micd_aosp_ranges),
+	.hpdet_channel = ARIZONA_ACCDET_MODE_HPL,
+
+	/* Below settings come from Android kernel sources */
+	.micd_bias_start_time = 1,
+	.micd_rate = 6,
+	.micd_force_micbias = 1,
+	.micd_configs = lenovo_yt3_wm5102_micd_config,
+	.num_micd_configs = ARRAY_SIZE(lenovo_yt3_wm5102_micd_config),
+        .micbias={
+           [0]={ /*MICBIAS1*/
+                 .mV =2800 ,
+                 .ext_cap=1,
+                 .discharge =1 ,
+                 .soft_start =0,
+                 .bypass =0,
+           },
+           [1]={ /*MICBIAS2*/
+                 .mV =2800 ,
+                 .ext_cap=1,
+                 .discharge =1 ,
+                 .soft_start =0,
+                 .bypass =0,
+           },
+           [2]={ /*MICBIAS3*/
+                 .mV =2800 ,
+                 .ext_cap=1,
+                 .discharge =1 ,
+                 .soft_start =0,
+                 .bypass =0,
+           },
+        },
+};
+
+static const struct x86_spi_dev_info lenovo_yt3_spi_devs[] __initconst = {
+	{
+		/* WM5102 codec */
+		.board_info = {
+			.modalias = "wm5102",
+			.platform_data = &lenovo_yt3_wm5102_pdata,
+			.max_speed_hz = 5000000,
+		},
+		.ctrl_path = "\\_SB_.PCI0.SPI1",
+		.irq_data = {
+			.type = X86_ACPI_IRQ_TYPE_GPIOINT,
+			.chip = "INT33FF:00",
+			.index = 91,
+			.trigger = ACPI_LEVEL_SENSITIVE,
+			.polarity = ACPI_ACTIVE_LOW,
+			.con_id = "wm5102_irq",
+		},
+	}
+};
+
 static int __init lenovo_yt3_init(void)
 {
 	int ret;
@@ -720,14 +805,28 @@  static struct gpiod_lookup_table lenovo_yt3_hideep_gpios = {
 	},
 };
 
+static struct gpiod_lookup_table lenovo_yt3_wm5102_gpios = {
+	.dev_id = "spi1.0",
+	.table = {
+		GPIO_LOOKUP("INT33FF:00", 75, "wlf,spkvdd-ena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("INT33FF:00", 81, "wlf,ldoena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("INT33FF:00", 82, "reset", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("arizona", 2, "wlf,micd-pol", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static struct gpiod_lookup_table * const lenovo_yt3_gpios[] = {
 	&lenovo_yt3_hideep_gpios,
+	&lenovo_yt3_wm5102_gpios,
 	NULL
 };
 
 const struct x86_dev_info lenovo_yt3_info __initconst = {
 	.i2c_client_info = lenovo_yt3_i2c_clients,
 	.i2c_client_count = ARRAY_SIZE(lenovo_yt3_i2c_clients),
+	.spi_dev_info = lenovo_yt3_spi_devs,
+	.spi_dev_count = ARRAY_SIZE(lenovo_yt3_spi_devs),
 	.gpiod_lookup_tables = lenovo_yt3_gpios,
 	.init = lenovo_yt3_init,
 };