diff mbox

[v2,1/3] ARM: dts: keystone-k2g: Add device state controller node

Message ID 20160809143306.25028-2-afd@ti.com
State Accepted
Commit 08fa198ded16cb0ec573c10f2f4a8523b319b2c6
Headers show

Commit Message

Andrew Davis Aug. 9, 2016, 2:33 p.m. UTC 
Add the device state controller node as a syscon node to the
K2G SoC. This module provides similar device control functionality
as that on the existing K2 SoCs.

One example usage would be the boot address programming of the
DSP processor sub-system.

Signed-off-by: Andrew F. Davis <afd@ti.com>

Signed-off-by: Suman Anna <s-anna@ti.com>

---
 arch/arm/boot/dts/keystone-k2g.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

-- 
2.9.2
diff mbox

Patch

diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 3372615..fe17dc4 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -83,6 +83,11 @@ 
 			pinctrl-single,function-mask = <0x001b0007>;
 		};
 
+		devctrl: device-state-control@02620000 {
+			compatible = "ti,keystone-devctrl", "syscon";
+			reg = <0x02620000 0x1000>;
+		};
+
 		uart0: serial@02530c00 {
 			compatible = "ns16550a";
 			current-speed = <115200>;