diff mbox series

arm: debug: reuse the config DEBUG_OMAP2UART{1,2} for OMAP{3,4,5}

Message ID 20231025112136.3445-1-lukas.bulwahn@gmail.com
State New
Headers show
Series arm: debug: reuse the config DEBUG_OMAP2UART{1,2} for OMAP{3,4,5} | expand

Commit Message

Lukas Bulwahn Oct. 25, 2023, 11:21 a.m. UTC 
Commit d2b310b0234c ("ARM: debug: Use generic 8250 debug_ll for omap2 and
omap3/4/5 common uarts") adds address definitions of DEBUG_UART_PHYS for
OMAP2, OMAP3, OMAP4 and OMAP5 in ./arch/arm/Kconfig.debug.

These definitions depend on DEBUG_OMAP{2,3,4,5}UART{1,2}; however, only
DEBUG_OMAP2UART{1,2} are defined in ./arch/arm/Kconfig.debug, and
DEBUG_OMAP{3,4,5}UART{1,2} are not defined. Hence, the script
./scripts/checkkconfigsymbols.py warns here on non-existing symbols.
Simply reuse the config DEBUG_OMAP2UART{1,2}; there is no need to define
separate config symbols for OMAP{3,4,5}. So, just delete the dead
references to DEBUG_OMAP{3,4,5}UART{1,2}.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
---
 arch/arm/Kconfig.debug | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

Comments

Tony Lindgren Dec. 1, 2023, 7:02 a.m. UTC | #1 
* Lukas Bulwahn <lukas.bulwahn@gmail.com> [231025 14:21]:
> Simply reuse the config DEBUG_OMAP2UART{1,2}; there is no need to define
> separate config symbols for OMAP{3,4,5}. So, just delete the dead
> references to DEBUG_OMAP{3,4,5}UART{1,2}.

Thanks applying into omap-for-v6.8/debug.

Tony
Tony Lindgren Dec. 1, 2023, 7:05 a.m. UTC | #2 
* Tony Lindgren <tony@atomide.com> [231201 09:02]:
> * Lukas Bulwahn <lukas.bulwahn@gmail.com> [231025 14:21]:
> > Simply reuse the config DEBUG_OMAP2UART{1,2}; there is no need to define
> > separate config symbols for OMAP{3,4,5}. So, just delete the dead
> > references to DEBUG_OMAP{3,4,5}UART{1,2}.
> 
> Thanks applying into omap-for-v6.8/debug.

It's been already applied by Arnd, no need to do anything :)

Regards,

Tony
diff mbox series

Patch

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index b407b7b9b715..fc2b41d41447 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1593,10 +1593,8 @@  config DEBUG_UART_PHYS
 	default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
 	default 0x48022000 if DEBUG_TI81XXUART2
 	default 0x48024000 if DEBUG_TI81XXUART3
-	default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
-				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
-	default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
-				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+	default 0x4806a000 if DEBUG_OMAP2UART1
+	default 0x4806c000 if DEBUG_OMAP2UART2
 	default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0x49020000 if DEBUG_OMAP3UART3
 	default 0x49042000 if DEBUG_OMAP3UART4
@@ -1719,10 +1717,8 @@  config DEBUG_UART_VIRT
 	default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
 	default 0xfa022000 if DEBUG_TI81XXUART2
 	default 0xfa024000 if DEBUG_TI81XXUART3
-	default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
-				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
-	default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
-				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+	default 0xfa06a000 if DEBUG_OMAP2UART1
+	default 0xfa06c000 if DEBUG_OMAP2UART2
 	default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT