@@ -37,7 +37,39 @@ &pmu_bsc {
status = "okay";
pmu: pmu@8 {
+ compatible = "brcm,bcm59056";
+ interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x08>;
+
+ regulators {
+ camldo1_reg: camldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sdldo_reg: sdldo {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ sdxldo_reg: sdxldo {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ usbldo_reg: usbldo {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ iosr1_reg: iosr1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
};
};
@@ -74,39 +106,3 @@ &usbotg {
&usbphy {
status = "okay";
};
-
-#include "bcm59056.dtsi"
-
-&pmu {
- compatible = "brcm,bcm59056";
- interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
- regulators {
- camldo1_reg: camldo1 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- sdldo_reg: sdldo {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- sdxldo_reg: sdxldo {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <3300000>;
- };
-
- usbldo_reg: usbldo {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- iosr1_reg: iosr1 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
- };
-};
deleted file mode 100644
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-* Copyright 2014 Linaro Limited
-* Author: Matt Porter <mporter@linaro.org>
-*/
-
-&pmu {
- compatible = "brcm,bcm59056";
- regulators {
- rfldo_reg: rfldo {
- };
-
- camldo1_reg: camldo1 {
- };
-
- camldo2_reg: camldo2 {
- };
-
- simldo1_reg: simldo1 {
- };
-
- simldo2_reg: simldo2 {
- };
-
- sdldo_reg: sdldo {
- };
-
- sdxldo_reg: sdxldo {
- };
-
- mmcldo1_reg: mmcldo1 {
- };
-
- mmcldo2_reg: mmcldo2 {
- };
-
- audldo_reg: audldo {
- };
-
- micldo_reg: micldo {
- };
-
- usbldo_reg: usbldo {
- };
-
- vibldo_reg: vibldo {
- };
-
- csr_reg: csr {
- };
-
- iosr1_reg: iosr1 {
- };
-
- iosr2_reg: iosr2 {
- };
-
- msr_reg: msr {
- };
-
- sdsr1_reg: sdsr1 {
- };
-
- sdsr2_reg: sdsr2 {
- };
-
- vsr_reg: vsr {
- };
-
- gpldo1_reg: gpldo1 {
- };
-
- gpldo2_reg: gpldo2 {
- };
-
- gpldo3_reg: gpldo3 {
- };
-
- gpldo4_reg: gpldo4 {
- };
-
- gpldo5_reg: gpldo5 {
- };
-
- gpldo6_reg: gpldo6 {
- };
-
- vbus_reg: vbus {
- };
- };
-};
The BCM59056 PMIC has its own separate DTSI, meant to be included in a DTS file after defining the pmu node on some I2C bus. I'm not aware of many other devices that do this, and it seems very unintuitive. Drop the DTS in favor of adding the BCM59056 PMIC node directly into the device DTS files. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> --- arch/arm/boot/dts/broadcom/bcm28155-ap.dts | 68 +++++++++++----------- arch/arm/boot/dts/broadcom/bcm59056.dtsi | 91 ------------------------------ 2 files changed, 32 insertions(+), 127 deletions(-)