| Message ID | 1471376759-9561-1-git-send-email-linus.walleij@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
On Tue 16 Aug 12:45 PDT 2016, Linus Walleij wrote: > This adds the PM8058 LEDs as used in the platform. > > Cc: linux-arm-msm@vger.kernel.org > Cc: linux-leds@vger.kernel.org > Cc: Andy Gross <andy.gross@linaro.org> > Cc: Stephen Boyd <sboyd@codeaurora.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Jacek Anaszewski <j.anaszewski@samsung.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > These DT bindings have been ACKed by Rob Herring and Bjorn Andersson > so I think the patch is safe to merge to the Qcom tree. > --- > arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 39 ++++++++++++++++++++++++++ > 1 file changed, 39 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts > index 0abc93e5bb00..b0800b988174 100644 > --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts > +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts > @@ -239,6 +239,45 @@ > }; > }; > }; > + > + led@48 { > + /* > + * The keypad LED @0x48 is routed to > + * the sensor board where it is > + * connected to an infrared LED > + * SFH4650 (60mW, @850nm) next to the > + * ambient light and proximity sensor > + * Capella Microsystems CM3605. > + */ > + compatible = "qcom,pm8058-keypad-led"; > + reg = <0x48>; > + label = "proximity0"; > + default-state = "off"; > + }; > + led@131 { > + compatible = "qcom,pm8058-led"; > + reg = <0x131>; > + label = "pm8058:red"; > + default-state = "off"; > + }; > + led@132 { > + /* > + * This is actually green too on my > + * board, but documented as yellow. > + */ > + compatible = "qcom,pm8058-led"; > + reg = <0x132>; > + label = "pm8058:yellow"; > + default-state = "off"; > + linux,default-trigger = "mmc0"; > + }; > + led@133 { > + compatible = "qcom,pm8058-led"; > + reg = <0x133>; > + label = "pm8058:green"; > + default-state = "on"; > + linux,default-trigger = "heartbeat"; > + }; > }; > }; > > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-leds" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 0abc93e5bb00..b0800b988174 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -239,6 +239,45 @@ }; }; }; + + led@48 { + /* + * The keypad LED @0x48 is routed to + * the sensor board where it is + * connected to an infrared LED + * SFH4650 (60mW, @850nm) next to the + * ambient light and proximity sensor + * Capella Microsystems CM3605. + */ + compatible = "qcom,pm8058-keypad-led"; + reg = <0x48>; + label = "proximity0"; + default-state = "off"; + }; + led@131 { + compatible = "qcom,pm8058-led"; + reg = <0x131>; + label = "pm8058:red"; + default-state = "off"; + }; + led@132 { + /* + * This is actually green too on my + * board, but documented as yellow. + */ + compatible = "qcom,pm8058-led"; + reg = <0x132>; + label = "pm8058:yellow"; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + led@133 { + compatible = "qcom,pm8058-led"; + reg = <0x133>; + label = "pm8058:green"; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; }; };
This adds the PM8058 LEDs as used in the platform. Cc: linux-arm-msm@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: Andy Gross <andy.gross@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- These DT bindings have been ACKed by Rob Herring and Bjorn Andersson so I think the patch is safe to merge to the Qcom tree. --- arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 39 ++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-leds" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html